Novel Zirconia in Dentistry: Clinical Applications and Challenges
View this Special IssueCorrigendum | Open Access
Ziyu Mei, Yuqing Lu, Yuxin Lou, Ping Yu, Manlin Sun, Xin Tan, Junjing Zhang, Li Yue, Haiyang Yu, "Corrigendum to “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique”", BioMed Research International, vol. 2021, Article ID 9796816, 2 pages, 2021. https://doi.org/10.1155/2021/9796816
Corrigendum to “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique”
In the article titled “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique” [1], incorrect images were used for Figures 1 and 2 due to an error during the preparation of the manuscript. Figures 1 and 2 should be corrected as follows:
(a)
(b)
References
- Z. Mei, Y. Lu, Y. Lou et al., “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique,” BioMed Research International, vol. 2021, Article ID 6612840, 11 pages, 2021. View at: Publisher Site | Google Scholar
Copyright
Copyright © 2021 Ziyu Mei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.