Prospects for Irradiation in Cellulosic Ethanol Production

Saini, Anita; Aggarwal, Neeraj K.; Sharma, Anuja; Yadav, Anita

doi:https://doi.org/10.1155/2015/157139

Biotechnology Research International

On this page

Abstract Introduction Conclusion References Copyright Related Articles

Review Article | Open Access

Volume 2015 | Article ID 157139 | https://doi.org/10.1155/2015/157139

Prospects for Irradiation in Cellulosic Ethanol Production

Anita Saini,¹Neeraj K. Aggarwal,¹Anuja Sharma,¹and Anita Yadav²

Academic Editor: Marc Beauregard

Received26 Sept 2015

Accepted16 Nov 2015

Published29 Dec 2015

Abstract

Second generation bioethanol production technology relies on lignocellulosic biomass composed of hemicelluloses, celluloses, and lignin components. Cellulose and hemicellulose are sources of fermentable sugars. But the structural characteristics of lignocelluloses pose hindrance to the conversion of these sugar polysaccharides into ethanol. The process of ethanol production, therefore, involves an expensive and energy intensive step of pretreatment, which reduces the recalcitrance of lignocellulose and makes feedstock more susceptible to saccharification. Various physical, chemical, biological, or combined methods are employed to pretreat lignocelluloses. Irradiation is one of the common and promising physical methods of pretreatment, which involves ultrasonic waves, microwaves, γ-rays, and electron beam. Irradiation is also known to enhance the effect of saccharification. This review explains the role of different radiations in the production of cellulosic ethanol.

1. Introduction

Rapid exploitation of the energy sources has led to their depletion [1] causing the problem of energy security to the future generations. Limited availability of the fossil fuels and long duration involved in their production have necessitated the search for renewable sources of energy. Biofuels are one of the promising alternatives to this problem [2]. They have gained attention not only due to their potential of ensuring energy supply, but also due to the fact that net GHGs (greenhouse gases) emission by the use of biofuels is nearly zero [3]. Bioethanol, the ethanol produced from biomass, is one of the main types of biofuels being produced commercially. It may be produced from sugar- or starch-rich food crops (known as “first generation biofuels”) such as cereals, sugarcane, sugar beet, and corn or lignocelluloses and organic waste materials (known as “second generation biofuels” or “cellulosic ethanol”). Brazil and USA, world’s largest ethanol producers, together accounting for more than 65% of global ethanol production, produce ethanol from sugar cane and corn, respectively [4]. But the sustainability of first generation biofuels has been criticized because, beyond a threshold point, biofuel production form food crops is not possible without threatening food supplies and biodiversity. Therefore, second generation biofuels, produced from low cost substrates [2] such as nonfood crops and nonedible parts of the food crops, make good candidate for dependence for major energy supplies in the future. The process of cellulosic ethanol production has been outlined in Figure 1.

Lignocelluloses account for 50% of the biomass in the biosphere [5]. The diversity of lignocellulosic feedstock [6] and its abundance also eliminate the problem of competition for feeding and fueling from food crops [7]. Lignocellulosic biomass is mainly composed of cellulose, hemicellulose, and lignin [8]. The celluloses and hemicelluloses are the polymers of fermentable sugars. They are arranged in a complex structure in close association with relatively recalcitrant, noncarbohydrate polymer of lignin and are not easily accessible for their hydrolysis. A pretreatment step is, therefore, required to alter the structure of lignocellulose. Pretreatment opens up the structure of lignocellulose (Figure 2, [9]) by partial breakdown of its constituent polymers, weakening of lignin and hemicellulose heteromatrix and reducing the crystallinity of cellulose [9]. As a result, pore size is increased and cellulosic and hemicellulosic surface areas are exposed for enzymatic or chemical saccharification to sugar monomers.

The pretreatment increases the yield of hydrolysis products to about 90% against less than 20% in the untreated biomass [10]. The pretreatment can be done by using various physical, chemical, and biological methods or combination of these methods (Table 1).

Among various physical methods, irradiation is an attractive method for pretreatment. In biomass irradiation process, biomass is exposed to high energy radiations such as ultrasonic waves, microwaves, γ-rays, and electron beam. The effectiveness of the treatment depends on several factors such as frequency of radiations, time of exposure, composition of the biomass, and resistance to the radiations by medium between radiations and biomass. The high energy radiations increase the specific surface area of biomass; decrease the degrees of polymerization and crystallinity of cellulose; and partially hydrolyze the hemicellulose and lignin components [11].

2. Gamma Irradiation

Gamma radiations (γ-rays) are very high energy radiations consisting of high energy photons, with deep penetration power, and are produced by the decay of atomic nuclei as they return from high to low energy state (“gamma decay”). They are one of the ionizing radiations of electromagnetic spectrum, capable of producing ionization cascade in matter. The radioactive nuclides of Cobalt-60 and Cesium-137 produce gamma rays spontaneously when undergoing self-disintegration [12]. For irradiation by cobalt, ⁶⁰Co is loaded into a sealed chamber of metal alloy to prevent escape of the rays [13]. Radiations then travel from the sealed source at the speed of light and bombard the biomass. The energy carried by the gamma radiation is transferred to the biomass components by collisions of radiations with their atoms. Equal energy is absorbed by the carbon, hydrogen, and oxygen atoms in the biomass polymers. The collisions result in the loss of electrons by atoms causing their ionization. Various short- and long-lived radicals are formed. The biomass structure is altered by cross-linking and molecular scission in the lignocellulosic polymers [14]. Starch and cellulosic and pectic polysaccharides are degraded by cleavage of glycosidic bonds [13]. High doses of gamma rays depolymerize or delignify the cell wall constituents [15, 16]. Loss in the fiber content has been observed in plant matter [17]. A reduction in the rumen dry matter has been found in spruce sawdust, barks of spruce, pine, and larch when irradiated with high doses of gamma rays due to the solubilization and partial breakdown of the dry matter [18]. The degradation of cell wall has been reported to show increase in digestibility of the organic matter [16] as evidenced in rice straw [19], barley straw, pea straw, sugarcane bagasse, sunflower hulls, and pine sawdust [20]. Combined NaOH and gamma radiation treatment of wheat straw, cotton shells, peanut and soybean shells, and extracted olive oil cake and extracted unpeeled sunflower seeds showed improved digestibility compared to the individual methods [21]. Increased digestibility suggests the potential of gamma irradiation in pretreatment step during cellulosic ethanol production. Gamma radiations induced mutants with high lignolytic activity in Pleurotus sajor cajo, due to increased MnP enzyme production, can be utilized in biological delignification of lignocellulosic biomass [22]. In Brachypodium distachyon also, irradiation with 200 Gy gamma rays has shown enhanced expression of lignolytic genes resulting in degradation of lignocelluloses [23].

Gamma pretreatment enhanced the acid and enzymatic hydrolysis of biomass in bagasse [24], rice straw, rice hull, and corn husk. Increased sugar yields have been observed when wood chips, paper, grain straw, hay, and kapok irradiated at higher levels up to 1.7 to 2 MGy followed by their saccharification with cellulase enzyme [25]. Growth enhancement in cellulolytic microbes, such as Myrothecium verrucaria fungus, has been noticed in irradiated rice straw [26]. A marked increase has been witnessed in hydrolysis yield of gamma irradiated Khaya senegalensis and Triplochiton scleroxylon [16]. Efficiency of gamma irradiation is manifested in its capability of increasing enzymatic hydrolysis of rice straw even at high substrate loadings [27] and improved pretreatment results in comparison to steam explosion method [28].

The effectiveness of gamma pretreatment can be increased by combining irradiation with other pretreatment methods, physical as well as chemical. Combined methods enhance each other’s effect, making pretreatment more efficient at relatively milder conditions. During pretreatment of rice straw, coupling of milling, autoclaving, and gamma irradiation (70 Mrad) increased the yield of total reducing sugar after pretreatment and saccharification during ethanol production [29]. Similar results were shown by wheat straw when treated using gamma rays along with crushing [30]. A study by Helaln [31] indicated increase in the contents of reducing sugar (4-fold) and soluble and crude protein after pretreatment of rice straw with gamma radiations followed by its saccharification with A. ochraceus, A. terreus, or T. koningii. The required dose of gamma irradiation was reduced from 500 kGy to 10 kGy when wet straw was used instead of dry straw. Similarly, enzymatic saccharification of sawdust, rice straw, and sugar cane bagasse demonstrated relatively larger reducing sugar release from substrates pretreated with alkali (0.1 g/g) and 500 kGy gamma rays compared to either method alone [32]. An integration of urea and gamma irradiation has shown reduction in fibre content and increased digestibility of wheat straw, cotton seed shell, peanut shell, soybean shell, and extracted olive cake and extracted unpeeled sunflower seeds [21] and enhanced reducing sugar yield in Thai rice straw and corn stalk [33]. Gamma irradiation during acid pretreatment has enhanced saccharification yield in chaff [34], filter paper [35], and wheat straw [36]. The increase in the enzymatic hydrolysis, after combined pretreatment, can be attributed to decrease in crystallinity of cellulose, depolymerisation of cellulose, loss of hemicelluloses, and removal or modification of lignin [37]. The degree of cellulose degradation varies with the nature of the biomass and environmental conditions during irradiation [26]. However, it has no direct relation with either the cellulose or the lignin content [27].

Gamma rays have also raised ethanol production from orange peels due to decrease in limonene content, a fermentation inhibitor commonly found in orange peels [37].

3. Electron Beam

Electron beam irradiation is the process of exposing target material to accelerated and highly charged stream of electrons. The kinetic energy of the moving electrons accounts for high energy carried by the beam. “Electron beam accelerator” is the commonly used device for electron beam irradiation. A stream of electrons is emitted from the source or an “electron gun.” An accelerator speeds up the electrons. Focussing is mediated and regulated by magnetic focus and deflection systems. The electron energy can be modulated by varying the irradiation dose. Bombardment of the beam with the material transfers energy carried by it directly to the material components. This eliminates the need of heating for permeation of chemicals into the material being processed [38]. The heating also initiates various chemical and thermal transformations. In biomass, electron beam irradiation shows multiple effects somewhat similar to other ionizing radiations. Studies have indicated that interaction of high energy electron beam causes depolymerisation of cellulose as a result of chain scission [39]. Polymers are also modified chemically due to oxidising effects of electron beams. Several studies have demonstrated oxidation of chemical groups and introduction of carbonyl and carboxyl groups [40, 41]. Hydrogen bonds are broken between cellulose chains making it more amorphous causing reduction in crystallinity [39]. As a consequence, mechanical strength reduction occurs, in addition to increase in the solubility and reactivity of cellulose. Irradiation also generates numerous free radicals, which further aid in structure rupturing effects of radiations. Cross-linking is also seen in the polymers upon irradiation with electron beam [42]. General mechanism of electron beam on biomass destruction has been shown in Figure 3.

Polymer chain cleavage has, however, important role in biomass pretreatment. The mechanistic effects vary with the dose of irradiation. Chain cleavage effects are particularly prominent at higher doses [42]. The destructive effects are intensified at elevated temperature [41] and in wet conditions [42].

Thus biomass modifying and rapid degradation potential of electron beams has proven an efficient method in biomass pretreatment. Immense literature support is available (Table 2), which signifies the utilization of electron beam in bioethanol production technology and other lignocellulose based applications.

Thus the positive effects of electron beams, alone or in combined methods, can be optimized for different feedstock and an advanced technology can be developed for production of bioethanol in an environment friendly manner.

4. Sonication

Sonication is the process of application of sound waves to a sample for a wide range of applications. When biomass is exposed to the sound waves of ultrahigh frequency, that is, 100 kHz to 1 MHz, it results in disintegration of the polymeric constituents in the biomass. Biomass is usually suspended in an aqueous medium [63] and subjected to sound-wave treatment. Two types of sonicators can be used [64]. In direct sonication, a sonication probe is directly inserted into a sample vessel, whereas indirect sonication involves a sonication bath in which sound waves are propagated through a water bath containing the sample vessel (Figure 4). The ultrasonic waves cause periodic compression and expansion of water phase. The acoustic waves are generated which show directional propagation [65]. At sufficiently high intensities, the acoustic waves cause cavitation [66] by breaking cohesion forces between water molecules. Cavitation is the process of formation and collapse of bubbles. The bubbles are filled with gases or vapours and can be stable or transient [67]. The microbubbles grow in size and become unstable and some of them implode during cyclic compression. A shock wave is propagated causing mechanical effects such as turbulence and liquid circulation. Energy is released by bubble collapse causing local increase in temperature and pressure (local hot spots) as high as 10000 K and 1000 bar, respectively [67]. These extreme conditions cause dissociation of water vapours entrapped in the cavities into OH, O, and H radicals [68]. H₂O₂ and HO₂ are also formed along with a variety of other free, micro-, and macroradicals. The energy released and shear force generated are high enough to disrupt any chemical linkage at the biomass surface. A complex chemistry is rather involved in biomass degradation. Structural transformations in the biomass start at the liquid solid interface (Figure 5) and are conveyed internally through free radicals. The bonds in the aromatic rings and side groups are broken and more macroradicals are formed [64]. Radicals from sonolysis of water and biomass components together promote hydrolysis of polymers. Interactions between lignin and hemicellulosic components are affected selectively. This weakens the cell wall complex and opens its structure. The cellulosic crystallinity is decreased and depolymerisation occurs [69]. These structural disruptions increase the surface area [70], thereby making biomass accessible for other chemical and biological modifications.

The mechanical and physical processes of ultrasound can be exploited for pretreatment of different lignocellulosic biomass [71] suggesting its potential for application in biofuel production technology. Ultrasound pretreatment has boosted the total and reducing sugars yield from bagasse [72], rice straw [73], and banana flower stalk [74]. Sonication of wheat straw followed with acid hydrolysis has resulted in 132.96 mg/g of sugars due to structural disruption compared to 24.69 mg/g in control without ultrasound treatment [75]. Several factors such as exposure time, frequency during sonication, temperature during process, type of biomass, solvent used, and sonicator design decide the efficacy of the pretreatment [64, 76].

Reports have indicated degradation of a variety of poly- and disaccharides such as starch, cellulose, lactose, sucrose, and dextrans with ultrasonication [68]. Hemicellulosic and lignin components can be removed selectively using ultrasound mediated lignocellulosic fractionation depending on the sonication conditions for a specific feedstock. Dewaxed bamboo culms [77] and various other lignocellulosic substrates [63] subjected to ultrasound assisted extraction using different solvents have enhanced lignin expulsion from biomass. Both the recovered lignin and the residual solid biomass can be utilized for production of different value added products. The extracted lignin is relatively thermostable [77] and its structure is preserved during extraction [63]. Compared to conventional methods, ultrasound waves have extracted larger hemicellulosic fraction from corn cob [78] and buckwheat hulls while retaining its structure and biological activities [79].

Integration of sonication with other pretreatment methods shows significant improvement in biomass pretreatment. 9.2% higher hemicellulose, with higher purity and molecular weight, has been recovered from dewaxed wheat straw when sonicated for 35 min with 0.5% NaOH in 60% methanol [80]. Up to 50% of the relatively pure and stable lignin removal has been achieved from dewaxed wheat straw pretreated with 0.5 M KOH, at 35°C along with ultrasound exposure for 35 min [81]. Sonoassisted alkali pretreatment of sugarcane bagasse has removed 74.44% of lignin, yielding 69% hexose, 81% pentose, and 0.17 g/g of ethanol in the saccharification and fermentation steps [82]. The delignification was achieved in lesser time at relatively milder temperature conditions and generated very less amount of inhibitors [83]. Ultrasound has enhanced pretreatment effects in cotton gin trash [84], saccharification yield in garden biomass [85], and ethanol yield in sugarcane bagasse (0.38 g/g) [86] when combined with alkali pretreatment method. Coupling of acid pretreatment with sonication has resulted in higher sugar recovery from rice straw [87] and bagasse (94% of the expected yield) [88].

Combined ultrasound and ionic liquid treatment has proven an efficient method of pretreatment in rice straw using choline hydroxide [89] and in bagasse using choline acetate [90] and 3-butyl-1-methylimidazolium chloride [91]. Effect of ammonia pretreatment has also been augmented by sonication in sugarcane bagasse resulting in 95.78% cellulose recovery and 58.14% delignification, with 16.58% glucose extraction upon hydrolysis while generating lesser amount of inhibitors [92]. Sindhu et al. [93] have demonstrated significant rise in sugar concentration (0.661 g/g) from sugarcane tops when pretreated with surfactant assisted sonication.

Structural analysis has revealed processing of lignocellulosic biomass as a result of surface erosion during sonication [93]. The enhanced sugar release has been attributed to effective transport of sugar molecules due to strong convection generated during sonication [73]. Other factors contributing to sonication effects include increased mass transfer rate and water diffusion and decreased cellular adhesion [94]. Alone sonication destructs the cell wall structure, increases wood permeability coefficient, and forms microscopic channels [94]. However, integration with other methods accelerates pretreatment reactions, reduces processing time, converts biomass components selectively, and benefits in process economics.

Besides the pretreatment, cost of cellulosic ethanol production is also affected by saccharification and fermentation steps. Reports have shown marked influence of microwave irradiation on intensification of saccharification [95] and fermentation [96] output. Productivity enhancement claimed in fermentation during separate hydrolysis and fermentation is possibly due to modification in cell envelope of ethanologenic microbe without cellular disruption [96]. Implementation of ultrasound has also shown substantial stimulation in ethanol production during simultaneous saccharification and fermentation [97].

5. Microwave

Microwaves are the electromagnetic waves with frequency in the range of 300 MHz to 300 GHz [98]. In cellulosic ethanol production process, microwaves are employed in pretreatment and saccharification steps. Pretreatment of lignocellulosic biomass by microwave irradiation is based on nonthermal and thermal effects of microwaves. Heating is very essential parameter in pretreatment technology. Higher temperature accelerates the reaction rate and minimizes the chemicals requirement during pretreatment. Heating mechanism of microwaves makes it a preferred method over conventional heating. Conventional heating requires transfer medium, starts at the contact surface, and is conveyed inwardly by diffusion. Overheating on external side is a common problem with it. Microwave heating, however, heats entire volume simultaneously without direct contact with the material and thus renders uniform, rapid, and volumetric heating. Heating with microwave can also be regulated instantaneously [99]. Microwave heating is also called “dielectric heating,” which works on interaction between polar molecules or electrically conductive, dielectric chemical species and oscillating microwave electromagnetic radiations. The dielectric molecules align themselves with the electric and magnetic field of microwaves. Oscillating field causes agitation and alternation causes rotation of molecules (dipole rotation). Heat is generated consequently. Dielectrics present in lignocelluloses include water, cellulose, hemicellulose, and organic acids [100]. Heating creates hot spots within lignocelluloses, which shows an explosive effect on the recalcitrant structure rendering its disruption. Figure 6 depicts the mechanism of microwave heating and its comparison with conventional heating.

Different feedstocks show varying susceptibility to microwave induced alterations subject to their chemical composition [101]. Biomass with different composition varies in its dielectric properties [102]. Microwave radiations also exhibit nonthermal effects [103] such as molecular mobility, plasma formation, and enhanced diffusion in solids, which collectively contribute to structural disruptions. Though existence of nonthermal effects of microwave is debatable, its effects seem to be less pronounced than that of the thermal effects.

Dynamic alterations are seen in microwave irradiated lignocelluloses. Thermodestruction of lignin, hemicellulose, and cellulose is observed [104]. Porosity of biomass increases as a result of volatilization, allowing higher diffusion of oxygen. Mass loss also occurs till a threshold exposure time, beyond which no more vaporization takes place [105].

Utilization of microwaves in cellulosic ethanol production has been illustrated in the vast literature of various research studies. Microwave irradiation in sawdust in C. deodara modified the cell wall structure and exposed hemicelluloses, which resulted in high xylanase production by Geotrichum sp. F3 fungus [106]. Nonthermal effects of microwaves exhibited through plasma formation indicated erosion of lignin layer (plasma etching effect) in sugarcane as analysed by mass spectroscopy and Fourier-Transform Infrared Spectroscopy (FT-IR) [107]. Comparison of microwave heating with sand bath heating in corn stover has shown faster removal of xylan, lignin, and acetyl and increase in biomass digestibility. Elucidation of cellulose structural alterations displayed breakdown of amorphous regions [108]. Extensive exploitation of microwave effects has been done especially in enhancing the efficiency and reducing process time during pretreatment of biomass by other physicochemical methods. Microwave irradiation at 250 W for 10 min has dramatically increased the reducing sugar yields in switchgrass soaked in 3% NaOH solution [109]. The application of combined microwave and H₂O₂ activated ammonium molybdate pretreatment of woody biomass yielded 59.5% of sugar [110]. Two-stage pretreatment of sugarcane bagasse using 1% NaOH followed by 1% H₂SO₄ in microwave irradiated environment has been reported to enhance fermentable sugar extraction to 0.83 g/g of dry biomass. 90% lignin removal has been achieved by microwave-NaOH treatment at 450 W for 5 min [111]. Chen et al. [112] have demonstrated 80–98% of hemicellulose extraction from bagasse pretreated with combined acid-microwave pretreatment. Microwave assisted dilute ammonia pretreatment in sorghum bagasse removed 46% lignin, which resulted in increased porosity of biomass. This in turn enhanced glucose and ethanol yields to 42/100 g and 21/100 g dry biomass, respectively [113]. Lignin and hemicellulose extraction from KOH-microwave pretreated corn cob has also shown increase in surface area resulting in production of 34.79% sugars in hydrolysis [114]. Significantly high reduction in hemicellulosic, cellulosic, and lignin contents was observed in trunk and fronds of Elaeis guineensis when pretreated with microwave-alkali methods [115]. Microwave assisted alkali and acid pretreatment of oil palm empty fruit bunch has shown 71.9% reduction in lignin content [116]. Substantial amount of glucose concentration (48.58 g/L) was produced from corncobs pretreated with microwave combined with alkali-acid method [117]. Integration of microwave with H₂O₂ pretreatment in rice straw exhibited cell wall rupturing by disruption of silicon waxy structure and breakage of ether linkages between lignin and carbohydrates resulting in removal of lignin and increase in crystallinity index to 63.64% and 1453.64 μg/mL of sugar production upon enzymatic saccharification [118]. Integration of acid [118] and alkali [119] with microwave pretreatment has also shown similar results. Sugarcane tops have been successfully saccharified yielding 376 g/g sugars after surfactant aided microwave pretreatment [120]. Water hyacinth subjected to microwave-dilute acid pretreatment augmented saccharification yield up to 94.6% of expected theoretical value, as a result of hemicellulose breakdown [121]. In corn straw and rice husk, marked enhancement was observed in hydrolysis with enzyme from Myceliophthora heterothallica, when pretreated with combined microwave and alkali-glycerol method compared to unirradiated biomass [122]. Zheng et al. [123] have found enhanced sugar recovery from microwave-glycerol pretreated corncob as a consequence of selective removal of lignin and hemicellulose fractions during pretreatment. Thus conventional heating can be replaced with microwave heating during biomass pretreatment owing to speed acceleration capability of microwaves at the same temperature. This may contribute to improved economic feasibility of the process.

A study by Nomanbhay et al. [124] has indicated 5.8-fold increase in microwave assisted enzymatic hydrolysis in oil palm empty fruit bunch fibre suggesting positive role of microwave in saccharification. Enhanced enzymatic saccharification has also been observed in other research studies [125, 126].

6. Advantages of Irradiation

Characteristics of radiations can be exploited in all steps of bioethanol production, that is, pretreatment, saccharification, and fermentation, directly or indirectly. The aim of the pretreatment is to disrupt the tough lignocellulose complex to expose utilizable polymers. Conventional methods of pretreatment count on chemical or physicochemical methods primarily. But certain limitations associated with them need to be overcome, which has diverged the technological innovations to other advanced techniques. Irradiation is equally effective in biomass degradation as other methods, with additional advantages of controlled selective degradation of biomass components unlike chemical methods which sometimes lead to loss of some cellulosic or hemicellulosic parts. Irradiation does not involve use of solvents in large quantities eliminating need of their recovery or recycling. The problem of corrosion associated with some chemicals is not faced during irradiation. One big challenge of reduction of fermentation inhibitors generation is addressed well in radiation treatment [53]. The energy input in terms of heat required for chemical penetration is avoided [38]. Downstream steps of cooling and neutralization after biomass pretreatment are also not needed [49]. The comparison with biological pretreatment, however, is in progress as research is ongoing for both irradiation and biological methods. In addition, the saccharification enhancement effects of sonication [127] and tolerance enhancement induced by mutation potential of radiations in ethanologenic microbes [128] further broaden the scope of irradiation in the process of bioethanol production.

7. Economic Feasibility

Capital cost and operational cost are important parameters in determining the efficacy of a pretreatment method. The research studies involving irradiation of biomass need to be elaborated to assess the economic viability of the method for various feedstocks. Laboratory scale studies have just validated the potency of radiations in biomass pretreatment and indicated high capital cost because of special bioreactors required in the process. Also the operational cost involving high energy radiations is quite high. So adoption of irradiation as sole pretreatment method especially at industrial scale seems economically infeasible. However, the advantages associated with radiations cannot be ignored. Therefore, different approaches can be used to minimize the cost of pretreatment. The capital cost can be minimized, though over a short range, by designing high efficiency bioreactor with the help of engineering expertise. The operational cost can be reduced significantly across relatively wider range by combining irradiation with inexpensive chemical pretreatment methods or subjecting biomass to two-stage pretreatment which will be less energy intensive than individual method. Lower dose requirements, shorter duration involvement, and moderate process conditions can prove beneficial in irradiation combined with other physicochemical methods. Alternatively, the cost of upstream and downstream processes can be reduced so that the overall cost of bioethanol production process may not vary significantly. This can be achieved successfully by maximizing saccharification yield using highly catalytic hydrolases, utilizing advanced techniques of simultaneous saccharification and fermentation or simultaneous saccharification and cofermentation, and also generating various value added products by biorefinery.

8. Important Considerations

Owing to the advantages of irradiation, advanced technologies can be established for biomass pretreatment and downstream processing. However, certain points are to be considered beforehand. The research studies conducted till now have focused on biomass irradiation at lab scale only. Pilot scale studies are required to validate the outcome. The commercial implementation is a costly affair which needs to be taken care of during technology development. Furthermore, certain safety regulations are to be followed while using radiations to avoid health hazards associated with them.

9. Future Prospects

Irradiation is a recent and relatively less explored approach. Research studies are limited and can be elaborated. Optimization studies are essentially required for specific feedstock for broadening the prospects of irradiation applicability. Scale-up studies propose expansion in research scopes of role of irradiation in production of biofuel. At the end, commercialization is envisioned in the future as integrated part of biofuel production technology.

10. Conclusion

The indispensable beneficial effects of irradiation can be used in bioethanol production from lignocelluloses in improving the results of both pretreatment and saccharification steps. The effectiveness of radiations pretreatment is advantageous as it brings reproducible and quantitative changes in the biomass characteristics. The reactions can be commenced at moderate conditions of temperature and lesser amounts of chemicals are needed in methods integrated with other chemical treatments. The reduced energy input demands and other factors collectively can make overall process economically feasible. Radiations are thus a unique source of energy and their technological implementations can provide simpler, efficient, cost effective, and ecofriendly methods in biofuel industry.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

References

Y. Sun and J. Cheng, “Hydrolysis of lignocellulosic materials for ethanol production: a review,” Bioresource Technology, vol. 83, no. 1, pp. 1–11, 2002.
View at: Publisher Site | Google Scholar
I. N. A. Chartchalerm, T. Tanawut, K. Hikamporn, P. Ponpitak, and P. Virapong, “Appropriate technology for the bioconversion of Water Hyacinth (Eichhornia crassipes) to liquid ethanol: future prospects for community strengthening and sustainable development,” Experimental and Clinical Sciences, vol. 6, pp. 167–176, 2007.
View at: Google Scholar
A. E. Farrell, R. J. Plevin, B. T. Turner, A. D. Jones, M. O'Hare, and D. M. Kammen, “Ethanol can contribute to energy and environmental goals,” Science, vol. 311, no. 5760, pp. 506–508, 2006.
View at: Publisher Site | Google Scholar
P. C. Badger, “Ethanol from cellulose: a general review,” in Trends in New Crops and New Uses, J. Janick and A. Whipkey, Eds., pp. 17–21, ASHS Press, Alexandria, Va, USA, 2002.
View at: Google Scholar
R. J. Bothast and B. C. Saha, “Ethanol production from agricultural biomass substrates,” Advances in Applied Microbiology, vol. 44, pp. 261–286, 1997.
View at: Publisher Site | Google Scholar
M. Balat and H. Balat, “Recent trends in global production and utilization of bioethanol fuel,” Applied Energy, vol. 86, no. 11, pp. 2273–2282, 2009.
View at: Publisher Site | Google Scholar
K. T. Tan, K. T. Lee, and A. R. Mohamed, “Role of energy policy in renewable energy accomplishment: the case of second-generation bioethanol,” Energy Policy, vol. 36, no. 9, pp. 3360–3365, 2008.
View at: Publisher Site | Google Scholar
Y. Sudiyani and Muryanto, “The potential of biomass waste feedstock for bioethanol production,” in Proceeding of the International Conference on Sustainable Energy Engineering and Application Inna Garuda Hotel, Yogyakarta, Indonesia, November 2012.
View at: Google Scholar
P. Kumar, D. M. Barrett, M. J. Delwiche, and P. Stroeve, “Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production,” Industrial and Engineering Chemistry Research, vol. 48, no. 8, pp. 3713–3729, 2009.
View at: Publisher Site | Google Scholar
L. R. Lynd, “Overview and evaluation of fuel ethanol from cellulosic biomass: technology, economics, the environment and policy,” Annual Review of Energy and the Environment, vol. 21, no. 1, pp. 403–465, 1996.
View at: Google Scholar
Y. Zheng, Z. Pan, R. Zhang, and Y. Zheng, “Overview of biomass pretreatment for ethanol production,” International Journal of Agricultural and Biological Engineering, vol. 2, no. 3, pp. 51–68, 2009.
View at: Google Scholar
N. K. Kortei and M. Wiafe-Kwagyan, “Evaluating the effect of gamma radiation on eight different agro-lignocellulose waste materials for the production of oyster mushrooms (Pleurotus eous (Berk.) Sacc. strain P-31),” Croatian Journal of Food Technology, Biotechnology and Nutrition, vol. 9, no. 3-4, pp. 83–90, 2014.
View at: Google Scholar
R. S. Orozco, P. B. Hernández, N. F. Ramírez, G. R. Morales, J. S. Luna, and A. J. C. Montoya, “Gamma irradiation induced degradation of orange peels,” Energies, vol. 5, no. 8, pp. 3051–3063, 2012.
View at: Publisher Site | Google Scholar
F. Khan, S. R. Ahmad, and E. Kronfli, “γ-radiation induced changes in the physical and chemical properties of lignocellulose,” Biomacromolecules, vol. 7, no. 8, pp. 2303–2309, 2006.
View at: Publisher Site | Google Scholar
M. R. Al-Masri and M. Zarkawi, “Effects of gamma irradiation on cell-wall constituents of some agricultural residues,” Radiation Physics and Chemistry, vol. 44, no. 6, pp. 661–663, 1994.
View at: Publisher Site | Google Scholar
E. Betiku, O. A. Adetunji, T. V. Ojumu, and B. O. Solomon, “A Comparative study of the hydrolysis of gamma irradiated lignocelluloses,” Brazilian Journal of Chemical Engineering, vol. 26, no. 2, pp. 251–255, 2009.
View at: Publisher Site | Google Scholar
N. D. Lam, N. Nagasawa, and T. Kume, “Effect of radiation and fungal treatment on lignocelluloses and their biological activity,” Radiation Physics and Chemistry, vol. 59, no. 4, pp. 393–398, 2000.
View at: Publisher Site | Google Scholar
G. Flachowsky, M. Bär, S. Zuber, and K. Tiroke, “Cell wall content and rumen dry matter disappearance of γ-irradiated wood by-products,” Biological Wastes, vol. 34, no. 3, pp. 181–189, 1990.
View at: Publisher Site | Google Scholar
S. X. Tang, K. Q. Wang, Z. H. Cong et al., “Changes in chemical composition and in vitro fermentation characters of rice straw due to gamma irradiation,” Journal of Food, Agriculture & Environment, vol. 10, no. 2, pp. 459–462, 2012.
View at: Google Scholar
M. N. M. Ibrahim and G. R. Pearce, “Effects of gamma irradiation on the composition and in vitro digestibility of crop by-products,” Agricultural Wastes, vol. 2, no. 4, pp. 253–259, 1980.
View at: Publisher Site | Google Scholar
M. R. Al-Masri, “In vitro digestible energy of some agricultural residues, as influenced by gamma irradiation and sodium hydroxide,” Applied Radiation and Isotopes, vol. 50, no. 2, pp. 295–301, 1999.
View at: Publisher Site | Google Scholar
M. A. M. Abo-State, M. Othman, O. Khatab, and E. A. Abd-Elfattah, “Enhanced production of MnP enzyme produced by Pleurotus sajor-Caju exposed to gamma radiation,” World Applied Sciences Journal, vol. 14, no. 10, pp. 1457–1468, 2011.
View at: Google Scholar
J. Y. Kim, C. S. Na, D. S. Kim, J. Kim, and Y. W. Seo, “The effect of chronic gamma ray irradiation on lignocellulose of Brachypodium distachyon,” Cellulose, vol. 22, no. 4, pp. 2419–2430, 2015.
View at: Publisher Site | Google Scholar
M. Kumakura and I. Kaetsu, “Effect of radiation pretreatment of bagasse on enzymatic and acid hydrolysis,” Biomass, vol. 3, no. 3, pp. 199–208, 1983.
View at: Publisher Site | Google Scholar
S. Ardica, E. Calderaro, and C. Cappadona, “Radiation pretreatments of cellulose materials for the enhancement of enzymatic hydrolysis-II. Wood chips, paper, grain straw, hay, kapok,” Radiation Physics and Chemistry, vol. 26, no. 6, pp. 701–704, 1985.
View at: Publisher Site | Google Scholar
A. M. D. Rosa, A. S. Dela Mines, R. B. Banzon, and Z. F. Simbul-Nuguid, “Radiation pretreatment of cellulose for energy production,” Radiation Physics and Chemistry, vol. 22, no. 3–5, pp. 861–867, 1983.
View at: Publisher Site | Google Scholar
C. Liang, S. Xiao-Jun, C. Jing-ping et al., “Enzymatic hydrolysis of rice straw pretreated by irradiation at high solid loading,” Chemistry and Industry of Forest Products, vol. 35, no. 2, pp. 129–134, 2015.
View at: Google Scholar
K.-Q. Wang, X.-Y. Xiong, J.-P. Chen, L. Chen, X. Su, and Y. Liu, “Comparison of gamma irradiation and steam explosion pretreatment for ethanol production from agricultural residues,” Biomass and Bioenergy, vol. 46, pp. 301–308, 2012.
View at: Publisher Site | Google Scholar
M. A. Abo-State, A. M. Ragab, N. S. EL-Gendy, L. A. Farahat, and H. R. Madian, “Bioethanol production from rice straw enzymatically saccharified by fungal isolates, Trichoderma viride F94 and Aspergillus terreus F98,” Soft, vol. 3, no. 2, pp. 19–29, 2014.
View at: Publisher Site | Google Scholar
C. Yang, Z. Shen, G. Yu, and J. Wang, “Effect and aftereffect of γ radiation pretreatment on enzymatic hydrolysis of wheat straw,” Bioresource Technology, vol. 99, no. 14, pp. 6240–6245, 2008.
View at: Publisher Site | Google Scholar
G. A. Helaln, “Bioconversion of straw into improved fodder: preliminary treatment of rice straw using mechanical, chemical and/or gamma irradiation,” Mycobiology, vol. 34, no. 1, pp. 14–21, 2006.
View at: Publisher Site | Google Scholar
A. Begum, H. Rashid, and N. Choudhury, “Saccharification of gamma-ray and alkali pretreated lignocellulosics,” Journal of Fermentation Technology, vol. 66, no. 6, pp. 681–684, 1988.
View at: Publisher Site | Google Scholar
S. Banchorndhevakul, “Effect of urea and urea-gamma treatments on cellulose degradation of Thai rice straw and corn stalk,” Radiation Physics and Chemistry, vol. 64, no. 5-6, pp. 417–422, 2002.
View at: Publisher Site | Google Scholar
M. Kumakura and I. Kaetsu, “Pretreatment by radiation and acids of chaff and its effect on enzymatic hydrolysis of cellulose,” Agricultural Wastes, vol. 9, no. 4, pp. 279–287, 1984.
View at: Publisher Site | Google Scholar
N. D. Kunz, J. L. Gainer, and J. L. Kelly, “Effects of gamma radiation on the low temperature dilute-acid hydrolysis of cellulose,” Nuclear Technology, vol. 16, no. 3, pp. 556–561, 1972.
View at: Google Scholar
S. H. Hong, J. T. Taek Lee, S. Lee et al., “Improved enzymatic hydrolysis of wheat straw by combined use of gamma ray and dilute acid for bioethanol production,” Radiation Physics and Chemistry, vol. 94, no. 1, pp. 231–235, 2014.
View at: Publisher Site | Google Scholar
H.-W. Bai, S. H. Hong, C.-H. Park, D. M. Jang, T. H. Kim, and B. Y. Chung, “Degradation of limonene by gamma radiation for improving bioethanol production,” Journal of the Korean Society for Applied Biological Chemistry, vol. 57, no. 1, pp. 1–4, 2014.
View at: Publisher Site | Google Scholar
S. Danu, H. Darsono, M. S. Kardha, Marsongko, and Oktaviani, “Electron beam degradation of oil palm empty fruit bunch,” International Journal of Environment and Bioenergy, vol. 3, no. 3, pp. 168–179, 2012.
View at: Google Scholar
U. Henniges, M. Hasani, A. Potthast, G. Westman, and T. Rosenau, “Electron beam irradiation of cellulosic materials-opportunities and limitations,” Materials, vol. 6, no. 5, pp. 1584–1598, 2013.
View at: Publisher Site | Google Scholar
J. F. Saeman, M. A. Millett, and E. J. Lawton, “Effect of high-energy cathode rays on cellulose,” Industrial & Engineering Chemistry, vol. 44, no. 12, pp. 2848–2852, 1952.
View at: Publisher Site | Google Scholar
B. G. Ershov and A. V. Ponomarev, “Prospects for electron-beam technology in plant biomass processing,” Environmental Problems, Herald of the Russian Academy of Sciences, vol. 81, no. 6, pp. 623–628, 2011.
View at: Publisher Site | Google Scholar
X. Ma, X. Zheng, M. Zhang et al., “Electron beam irradiation of bamboo chips: degradation of cellulose and hemicelluloses,” Cellulose, vol. 21, no. 6, pp. 3865–3870, 2014.
View at: Publisher Site | Google Scholar
M. Kamakura and I. Kaetsu, “Radiation degradation and the subsequent enzymatic hydrolysis of waste papers,” Biotechnology and Bioengineering, vol. 24, no. 4, pp. 991–997, 1982.
View at: Publisher Site | Google Scholar
T. Granfeldt, M. Jackson, S. L. Iverson, C. A. Chuaqui, and D. Free, “The effects of electron beam pretreatment of wood chips on energy consumption in high-yield pulping,” TAPPI Journal, vol. 75, no. 6, pp. 175–182, 1992.
View at: Google Scholar
L. Z. Xin and M. Kumakura, “Effect of radiation pretreatment on enzymatic hydrolysis of rice straw with low concentrations of alkali solution,” Bioresource Technology, vol. 43, no. 1, pp. 13–17, 1993.
View at: Publisher Site | Google Scholar
J. S. Bak, “Process evaluation of electron beam irradiation-based biodegradation relevant to lignocellulose bioconversion,” SpringerPlus, vol. 3, no. 1, article 487, pp. 1–6, 2014.
View at: Publisher Site | Google Scholar
D.-Y. Kim, B.-M. Lee, J.-Y. Lee, P.-H. Kang, and J.-P. Jeun, “Electron beam irradiation and dilute alkali pretreatment for improving saccharification of rice straw,” Journal of the Korean Society for Applied Biological Chemistry, vol. 57, no. 5, pp. 591–595, 2014.
View at: Publisher Site | Google Scholar
B.-M. Lee, J.-Y. Lee, P.-H. Kang, S.-K. Hong, and J.-P. Jeun, “Improved pretreatment process using an electron beam for optimization of glucose yield with high selectivity,” Applied Biochemistry and Biotechnology, vol. 174, no. 4, pp. 1548–1557, 2014.
View at: Publisher Site | Google Scholar
J. S. Bak, “Downstream optimization of fungal-based simultaneous saccharification and fermentation relevant to lignocellulosic ethanol production,” SpringerPlus, vol. 4, article 47, 7 pages, 2015.
View at: Publisher Site | Google Scholar
P. Vidya, S. R. Padwal-Desai, and K. K. Ussuf, “Pretreatment of lignocellulose by gamma rays and electron beam for enhanced degradation by Phanerochaete chrysosporium,” Asian Journal of Microbiology, Biotechnology & Environmental Sciences, vol. 8, no. 2, pp. 253–258, 2006.
View at: Google Scholar
B. Y. Chung, J. T. Lee, S. S. Lee et al., “A comparison of the efficiency of electron beam irradiation on enzymatic hydrolysis between 4 doses of 25 kGy and a single dose of 100 kGy for bioethanol production,” Journal of the Korean Society for Applied Biological Chemistry, vol. 55, no. 3, pp. 385–389, 2012.
View at: Publisher Site | Google Scholar
P. Shawrang, A. A. Sadeghi, and J. Ahmadpanah, “Ruminal degradation kinetics of wheat straw irradiated by high doses of electron beam,” Iranian Journal of Applied Animal Science, vol. 3, no. 1, pp. 25–29, 2013.
View at: Google Scholar
C. L. Duarte, M. A. Ribeiro, H. Oikawa, M. N. Mori, C. M. Napolitano, and C. A. Galvão, “Electron beam combined with hydrothermal treatment for enhancing the enzymatic convertibility of sugarcane bagasse,” Radiation Physics and Chemistry, vol. 81, no. 8, pp. 1008–1011, 2012.
View at: Publisher Site | Google Scholar
P. Shawrang, A. Majdabadi, and A. A. Sadeghi, “Changes in cell wall compositions and degradation kinetics of electron beam-irradiated sugarcane bagasse,” Turkish Journal of Veterinary and Animal Sciences, vol. 36, no. 5, pp. 527–532, 2012.
View at: Publisher Site | Google Scholar
J.-Y. Lee, B.-M. Lee, J.-P. Jeun, and P.-H. Kang, “Pretreatment of kenaf core by combined electron beam irradiation and water steam for enhanced hydrolysis,” Korean Chemical Engineering Research, vol. 52, no. 1, pp. 113–118, 2014.
View at: Publisher Site | Google Scholar
J.-P. Jeun, B.-M. Lee, J.-Y. Lee, P.-H. Kang, and J.-K. Park, “An irradiation-alkaline pretreatment of kenaf core for improving the sugar yield,” Renewable Energy, vol. 79, pp. 51–55, 2015.
View at: Publisher Site | Google Scholar
A. W. Khan, J.-P. Labrie, and J. McKeown, “Effect of electron-beam irradiation pretreatment on the enzymatic hydrolysis of softwood,” Biotechnology and Bioengineering, vol. 28, no. 9, pp. 1449–1453, 1986.
View at: Publisher Site | Google Scholar
M. Kumakura and I. Kaetsu, “Effect of electron beam current on radiation pretreatment of cellulosic wastes with electron beam acclerator,” Radiation Physics and Chemistry, vol. 23, no. 5, pp. 523–527, 1984.
View at: Google Scholar
S.-J. Shin and Y. J. Sung, “Improving enzymatic saccharification of hybrid poplar by electron beam irradiation pretreatment,” Journal of Biobased Materials and Bioenergy, vol. 4, no. 1, pp. 23–26, 2010.
View at: Publisher Site | Google Scholar
S. Sundar, N. S. Bergey, L. Salamanca-Cardona, A. Stipanovic, and M. Driscoll, “Electron beam pretreatment of switchgrass to enhance enzymatic hydrolysis to produce sugars for biofuels,” Carbohydrate Polymers, vol. 100, pp. 195–201, 2014.
View at: Publisher Site | Google Scholar
M. Moradi, A. Afzalzadeh, M. Behgar, and M. Ali Norouzian, “Effects of electron beam, NaOH and urea on chemical composition, phenolic compounds, in situ ruminal degradability and in vitro gas production kinetics of pistachio by-products,” Veterinary Research Forum, vol. 6, no. 2, pp. 111–117, 2015.
View at: Google Scholar
S. J. Yang, H. Y. Yoo, H. S. Choi, J. H. Lee, C. Park, and S. W. Kim, “Enhancement of enzymatic digestibility of Miscanthus by electron beam irradiation and chemical combined treatments for bioethanol production,” Chemical Engineering Journal, vol. 275, pp. 227–234, 2015.
View at: Publisher Site | Google Scholar
A. García, M. G. Alriols, R. Llano-Ponte, and J. Labidi, “Ultrasound-assisted fractionation of the lignocellulosic material,” Bioresource Technology, vol. 102, no. 10, pp. 6326–6330, 2011.
View at: Publisher Site | Google Scholar
M. S. Ur Rehman, I. Kim, Y. Chisti, and J.-I. Han, “Use of ultrasound in the production of bioethanol from lignocellulosic biomass,” Energy Education Science and Technology Part A: Energy Science and Research, vol. 30, no. 1, pp. 359–378, 2012.
View at: Google Scholar
M. Faraday, “On a peculiar class of acoustical figures; and on certain forms assumed by groups of particles upon vibrating elastic surfaces,” Philosophical Transactions of the Royal Society A, vol. 121, pp. 299–340, 1831.
View at: Google Scholar
J. Luo, Z. Fang, and R. L. Smith Jr., “Ultrasound-enhanced conversion of biomass to biofuels,” Progress in Energy and Combustion Sciences, vol. 41, pp. 56–93, 2013.
View at: Publisher Site | Google Scholar
A. Iskalieva, B. M. Yimmou, P. R. Gogate, M. Horvath, P. G. Horvath, and L. Csoka, “Cavitation assisted delignification of wheat straw: a review,” Ultrasonics Sonochemistry, vol. 19, no. 5, pp. 984–993, 2012.
View at: Publisher Site | Google Scholar
N. Kardos and J.-L. Luche, “Sonochemistry of carbohydrate compounds,” Carbohydrate Research, vol. 332, no. 2, pp. 115–131, 2001.
View at: Publisher Site | Google Scholar
H. Oubani, A. Abbas, and A. Harris, “Investigation on the mechanical pretreatment of cellulose by high intensity ultrasound and ball milling,” in Proceedings of the Chemeca: Engineering a Better World, pp. 1765–1775, Sydney, Australia, September 2011.
View at: Google Scholar
Z. Izadifar, “Ultrasound pretreatment of wheat dried distiller's grain (DDG) for extraction of phenolic compounds,” Ultrasonics Sonochemistry, vol. 20, no. 6, pp. 1359–1369, 2013.
View at: Publisher Site | Google Scholar
Z. M. A. Bundhoo, A. Mudhoo, and R. Mohee, “Promising unconventional pretreatments for lignocellulosic biomass,” Critical Reviews in Environmental Science and Technology, vol. 43, no. 20, pp. 2140–2211, 2013.
View at: Publisher Site | Google Scholar
S. Bhattacharyya, S. Datta, and C. Bhattacharjee, “Sonication boost the total reducing sugar (TRS) extraction from sugarcane bagasse after dilute acid hydrolysis,” Waste and Biomass Valorization, vol. 3, no. 1, pp. 81–87, 2012.
View at: Publisher Site | Google Scholar
K. Suresh, A. Ranjan, S. Singh, and V. S. Moholkar, “Mechanistic investigations in sono-hybrid techniques for rice straw pretreatment,” Ultrasonics Sonochemistry, vol. 21, no. 1, pp. 200–207, 2014.
View at: Publisher Site | Google Scholar
H. A. Villa-Vélez, H. A. Váquiro, and J. Telis-Romero, “The effect of power-ultrasound on the pretreatment of acidified aqueous solutions of banana flower-stalk: structural, chemical and statistical analysis,” Industrial Crops and Products, vol. 66, pp. 52–61, 2015.
View at: Publisher Site | Google Scholar
M. Y. Harun, A. B. Dayang Radiah, Z. Zainal Abidin, and R. Yunus, “Effect of physical pretreatment on dilute acid hydrolysis of water hyacinth (Eichhornia crassipes),” Bioresource Technology, vol. 102, no. 8, pp. 5193–5199, 2011.
View at: Publisher Site | Google Scholar
B. Rincón, L. Bujalance, F. G. Fermoso, A. Martín, and R. Borja, “Effect of ultrasonic pretreatment on biomethane potential of two-phase olive mill solid waste: kinetic approach and process performance,” The Scientific World Journal, vol. 2014, Article ID 648624, 9 pages, 2014.
View at: Publisher Site | Google Scholar
M.-F. Li, S.-N. Sun, F. Xu, and R.-C. Sun, “Ultrasound-enhanced extraction of lignin from bamboo (Neosinocalamus affinis): characterization of the ethanol-soluble fractions,” Ultrasonics Sonochemistry, vol. 19, no. 2, pp. 243–249, 2012.
View at: Publisher Site | Google Scholar
Z. Hromádková, J. Kováčiková, and A. Ebringerová, “Study of the classical and ultrasound-assisted extraction of the corn cob xylan,” Industrial Crops and Products, vol. 9, no. 2, pp. 101–109, 1999.
View at: Publisher Site | Google Scholar
Z. Hromádková and A. Ebringerová, “Ultrasonic extraction of plant materials—investigation of hemicellulose release from buckwheat hulls,” Ultrasonics Sonochemistry, vol. 10, no. 3, pp. 127–133, 2003.
View at: Publisher Site | Google Scholar
R. C. Sun, X. F. Sun, and X. H. Ma, “Effect of ultrasound on the structural and physiochemical properties of organosolv soluble hemicelluloses from wheat straw,” Ultrasonics Sonochemistry, vol. 9, no. 2, pp. 95–101, 2002.
View at: Publisher Site | Google Scholar
R. Sun and J. Tomkinson, “Comparative study of lignins isolated by alkali and ultrasound-assisted alkali extractions from wheat straw,” Ultrasonics Sonochemistry, vol. 9, no. 2, pp. 85–93, 2002.
View at: Publisher Site | Google Scholar
R. Velmurugan and K. Muthukumar, “Utilization of sugarcane bagasse for bioethanol production: sono-assisted acid hydrolysis approach,” Bioresource Technology, vol. 102, no. 14, pp. 7119–7123, 2011.
View at: Publisher Site | Google Scholar
R. Velmurugan and K. Muthukumar, “Ultrasound-assisted alkaline pretreatment of sugarcane bagasse for fermentable sugar production: optimization through response surface methodology,” Bioresource Technology, vol. 112, pp. 293–299, 2012.
View at: Publisher Site | Google Scholar
J. Plácido and S. Capareda, “Analysis of alkali ultrasonication pretreatment in bioethanol production from cotton gin trash using FT-IR spectroscopy and principal component analysis,” Bioresources and Bioprocessing, vol. 1, article 23, 2014.
View at: Publisher Site | Google Scholar
J. Gabhane, S. P. M. P. William, A. N. Vaidya, D. Anand, and S. Wate, “Pretreatment of garden biomass by alkali-assisted ultrasonication: effects on enzymatic hydrolysis and ultrastructural changes,” Journal of Environmental Health Science and Engineering, vol. 12, no. 76, pp. 1–6, 2014.
View at: Publisher Site | Google Scholar
M. Eblaghi, M. Niakousari, M. Sarshar, and G. R. Mesbahi, “Combining ultrasound with mild alkaline solutions as an effective pretreatment to boost the release of sugar trapped in sugarcane bagasse for bioethanol production,” Journal of Food Process Engineering, 2015.
View at: Publisher Site | Google Scholar
E. B. Belal, “Bioethanol production from rice straw residues,” Brazilian Journal of Microbiology, vol. 44, no. 1, pp. 225–234, 2013.
View at: Publisher Site | Google Scholar
M. R. Esfahani and M. Azin, “Pretreatment of sugarcane bagasse by ultrasound energy and dilute acid,” Asia-Pacific Journal of Chemical Engineering, vol. 7, no. 2, pp. 274–278, 2012.
View at: Publisher Site | Google Scholar
C.-Y. Yang and T. J. Fang, “Combination of ultrasonic irradiation with ionic liquid pretreatment for enzymatic hydrolysis of rice straw,” Bioresource Technology, vol. 164, pp. 198–202, 2014.
View at: Publisher Site | Google Scholar
K. Ninomiya, A. Kohori, M. Tatsumi et al., “Ionic liquid/ultrasound pretreatment and in situ enzymatic saccharification of bagasse using biocompatible cholinium ionic liquid,” Bioresource Technology, vol. 176, pp. 169–174, 2015.
View at: Publisher Site | Google Scholar
F. Yue, W. Lan, A. Zhang, C. Liu, R. Sun, and J. Ye, “Dissolution of holocellulose in ionic liquid assisted with ball-milling pretreatment and ultrasound irradiation,” BioResources, vol. 7, no. 2, pp. 2199–2208, 2012.
View at: Google Scholar
G. Ramadoss and K. Muthukumar, “Ultrasound assisted ammonia pretreatment of sugarcane bagasse for fermentable sugar production,” Biochemical Engineering Journal, vol. 83, pp. 33–41, 2014.
View at: Publisher Site | Google Scholar
R. Sindhu, M. Kuttiraja, V. E. Preeti, S. Vani, R. K. Sukumaran, and P. Binod, “A novel surfactant-assisted ultrasound pretreatment of sugarcane tops for improved enzymatic release of sugars,” Bioresource Technology, vol. 135, pp. 67–72, 2013.
View at: Publisher Site | Google Scholar
Z. He, Z. Zhao, F. Yang, and S. Yi, “Effect of ultrasound pretreatment on wood prior to vacuum drying,” Maderas: Ciencia y Tecnologia, vol. 16, no. 4, pp. 395–402, 2014.
View at: Publisher Site | Google Scholar
Z. Shi, Z. Cai, S. Wang, Q. Zhong, and J. J. Bozell, “Short-time ultrasonication treatment in enzymatic hydrolysis of biomass,” Holzforschung, vol. 67, no. 8, pp. 891–897, 2013.
View at: Publisher Site | Google Scholar
A. Z. Sulaiman, A. Ajit, R. M. Yunus, and Y. Chisti, “Ultrasound-assisted fermentation enhances bioethanol productivity,” Biochemical Engineering Journal, vol. 54, no. 3, pp. 141–150, 2011.
View at: Publisher Site | Google Scholar
B. E. Wood, H. C. Aldrich, and L. O. Ingram, “Ultrasound stimulates ethanol production during the simultaneous saccharification and fermentation of mixed waste office paper,” Biotechnology Progress, vol. 13, no. 3, pp. 232–237, 1997.
View at: Publisher Site | Google Scholar
S. Ethaib, R. Omar, S. M. M. Kamal, and D. R. A. Biak, “Microwave-assisted pretreatment of lignocellulosic biomass—a review,” Journal of Engineering Science and Technology, pp. 97–109, 2015.
View at: Google Scholar
A. K. Datta, “Fundamentals of heat and moisture transport for microwaveable food product and process development,” in Handbook of Microwave Technology for Food Applications, A. K. Datta and R. C. Anantheswaran, Eds., Marcel Dekker, New York, NY, USA, 2001.
View at: Google Scholar
S. M. Laghari, “Microwave individual and combined pre-treatments on lignocellulosic biomasses,” IOSR Journal of Engineering, vol. 4, no. 2, pp. 14–28, 2015.
View at: Publisher Site | Google Scholar
V. Chaturvedi and P. Verma, “An overview of key pretreatment processes employed for bioconversion of lignocellulosic biomass into biofuels and value added products,” 3 Biotech, vol. 3, no. 5, pp. 415–431, 2013.
View at: Publisher Site | Google Scholar
E. Hermiati, D. Mangunwidjaja, T. C. Sunarti, O. Suparno, and B. Prasetya, “Application of microwave heating in biomass hydrolysis and pretreatment for ethanol production,” Annales Bogorienses, vol. 14, no. 1, pp. 1–9, 2010.
View at: Google Scholar
A. de la Hoz, Á. Díaz-Ortiz, and A. Moreno, “Microwaves in organic synthesis. Thermal and non-thermal microwave effects,” Chemical Society Reviews, vol. 34, no. 2, pp. 164–178, 2005.
View at: Publisher Site | Google Scholar
B. Lanigan, V. Budarin, J. Clark, P. Shuttleworth, F. Deswarte, and A. Wilson, “Microwave processing as a green and energy efficient technology of energy and chemicals from biomass and energy crops,” Aspects of Applied Biology, vol. 90, pp. 277–282, 2008.
View at: Google Scholar
I. Barmina, A. Lickrastina, M. Purmalis et al., “Effect of biomass high-frequency pre-treatment on combustion characteristics,” Chemical Engineering Transactions, vol. 29, pp. 895–900, 2012.
View at: Publisher Site | Google Scholar
N. Sharma, P. Burgohain, R. Kaushal, and D. Tandon, “Use of microwave pretreated Cedrus deodara wood residue as a substrate for enhanced production of cellulase free xylanase from Geotrichum sp. F3 isolated from rural compost,” Journal of Microbiology and Biotechnology Research, vol. 2, no. 4, pp. 621–631, 2012.
View at: Google Scholar
N. Bundaleska, R. Saavedra, E. Tatarova, F. M. Dias, C. M. Ferreira, and J. Amorim, “Pretreatment of sugarcane biomass by atmospheric pressure microwave Plasmas,” in Proceedings of the 21st Europhysics Conference on Atomic and Molecular Physics of Ionized Gases (ESCAMPIG '12), Viana do Castelo, Portugal, July 2012.
View at: Google Scholar
J. Shi, Y. Pu, B. Yang, A. Ragauskas, and C. E. Wyman, “Comparison of microwaves to fluidized sand baths for heating tubular reactors for hydrothermal and dilute acid batch pretreatment of corn stover,” Bioresource Technology, vol. 102, no. 10, pp. 5952–5961, 2011.
View at: Publisher Site | Google Scholar
D. R. Keshwani, J. J. Cheng, J. C. Burns, L. Li, and V. Chiang, “Microwave pretreatment of switchgrass to enhance enzymatic hydrolysis,” in Proceedings of the Conference Presentations and White Papers: Biological Systems Engineering, Paper 35, Minneapolis, Minn, USA, 2007.
View at: Google Scholar
P. Verma, T. Watanabe, Y. Honda, and T. Watanabe, “Microwave-assisted pretreatment of woody biomass with ammonium molybdate activated by H₂O₂,” Bioresource Technology, vol. 102, no. 4, pp. 3941–3945, 2011.
View at: Publisher Site | Google Scholar
P. Binod, K. Satyanagalakshmi, R. Sindhu, K. U. Janu, R. K. Sukumaran, and A. Pandey, “Short duration microwave assisted pretreatment enhances the enzymatic saccharification and fermentable sugar yield from sugarcane bagasse,” Renewable Energy, vol. 37, no. 1, pp. 109–116, 2012.
View at: Publisher Site | Google Scholar
W.-H. Chen, S.-C. Ye, and H.-K. Sheen, “Hydrolysis characteristics of sugarcane bagasse pretreated by dilute acid solution in a microwave irradiation environment,” Applied Energy, vol. 93, pp. 237–244, 2012.
View at: Publisher Site | Google Scholar
C. Chen, D. Boldor, G. Aita, and M. Walker, “Ethanol production from sorghum by a microwave-assisted dilute ammonia pretreatment,” Bioresource Technology, vol. 110, pp. 190–197, 2012.
View at: Publisher Site | Google Scholar
B. Wanitwattanarumlug, A. Luengnaruemitchai, and S. Wongkasemjit, “Characterization of corn cobs from microwave and potassium hydroxide pretreatment,” International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, vol. 6, no. 4, pp. 354–358, 2012.
View at: Google Scholar
L.-W. Lai and A. Idris, “Disruption of oil palm trunks and fronds by microwave-alkali pretreatment,” BioResources, vol. 8, no. 2, pp. 2792–2804, 2013.
View at: Google Scholar
J. Akhtar, A. Idris, C. L. Teo, L. W. Lai, N. Hassan, and M. I. khan, “Comparison of delignification of Oil Palm Empty Fruit Bunch (EFB) by microwave assisted alkali/acid pretreatment and Conventional Pretreatment Method,” International Journal of Advances in Chemical Engineering and Biological Sciences, vol. 1, no. 2, pp. 155–157, 2014.
View at: Publisher Site | Google Scholar
J. Manaso, A. Luengnaruemitchai, and S. Wongkasemjit, “Optimization of two-stage pretreatment combined with microwave radiation using response surface methodology,” International Scholarly and Scientific Research & Innovation, vol. 7, no. 4, pp. 474–478, 2013.
View at: Google Scholar
R. Singh, S. Tiwari, M. Srivastava, and A. Shukla, “Performance study of combined microwave and acid pretreatment method for enhancing enzymatic digestibility of rice straw for bioethanol production,” Plant Knowledge Journal, vol. 2, no. 4, pp. 157–162, 2013.
View at: Google Scholar
R. Singh, S. Tiwari, M. Srivastava, and A. Shukla, “Microwave assisted alkali pretreatment of rice straw for enhancing enzymatic digestibility,” Journal of Energy, vol. 2014, Article ID 483813, 8 pages, 2014.
View at: Publisher Site | Google Scholar
D. P. Maurya, S. Vats, S. Rai, and S. Negi, “Optimization of enzymatic saccharification of microwave pretreated sugarcane tops through response surface methodology for biofuel,” Indian Journal of Experimental Biology, vol. 51, no. 11, pp. 992–996, 2013.
View at: Google Scholar
A. Xia, J. Cheng, W. Song, C. Yu, J. Zhou, and K. Cen, “Enhancing enzymatic saccharification of water hyacinth through microwave heating with dilute acid pretreatment for biomass energy utilization,” Energy, vol. 61, pp. 158–166, 2013.
View at: Publisher Site | Google Scholar
A. B. Diaz, M. M. Moretti, C. Bezerra-Bussoli et al., “Evaluation of microwave-assisted pretreatment of lignocellulosic biomass immersed in alkaline glycerol for fermentable sugars production,” Bioresource Technology, vol. 185, pp. 316–323, 2015.
View at: Publisher Site | Google Scholar
A. Zheng, Z. Zhao, Z. Huang et al., “Overcoming biomass recalcitrance for enhancing sugar production from fast pyrolysis of biomass by microwave pretreatment in glycerol,” Green Chemistry, vol. 17, no. 2, pp. 1167–1175, 2015.
View at: Publisher Site | Google Scholar
S. M. Nomanbhay, R. Hussain, and K. Palanisamy, “Microwave-assisted alkaline pretreatment and microwave assisted enzymatic saccharification of oil palm empty fruit bunch fiber for enhanced fermentable sugar yield,” Journal of Sustainable Bioenergy Systems, vol. 3, no. 1, pp. 7–17, 2013.
View at: Publisher Site | Google Scholar
H. Ooshima, K. Aso, Y. Harano, and T. Yamamoto, “Microwave treatment of cellulosic materials for their enzymatic hydrolysis,” Biotechnology Letters, vol. 6, no. 5, pp. 289–294, 1984.
View at: Publisher Site | Google Scholar
J. Azuma, J. Higashino, M. Isaka, and T. Koshijima, “Enhancement of enzymatic susceptibility of microwave-irradiated softwoods. Microwave irradiation of lignocellulosic materials IV,” Wood Research, no. 71, pp. 13–24, 1985.
View at: Google Scholar
E. V. Rokhina, P. Lens, and J. Virkutyte, “Low-frequency ultrasound in biotechnology: state of the art,” Trends in Biotechnology, vol. 27, no. 5, pp. 298–306, 2009.
View at: Publisher Site | Google Scholar
M. Zhang, Y. Xiao, R. Zhu, Q. Zhang, and S.-L. Wang, “Enhanced thermotolerance and ethanol tolerance in Saccharomyces cerevisiae mutated by high-energy pulse electron beam and protoplast fusion,” Bioprocess and Biosystems Engineering, vol. 35, no. 9, pp. 1455–1465, 2012.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2015 Anita Saini et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

3383

Downloads

1219

Citations