Table of Contents Author Guidelines Submit a Manuscript
Computational Intelligence and Neuroscience
Volume 2019, Article ID 3183050, 7 pages
https://doi.org/10.1155/2019/3183050
Research Article

Modelling of Asphalt’s Adhesive Behaviour Using Classification and Regression Tree (CART) Analysis

1Department of Civil Engineering, University of Bahrain, Zallaq, Bahrain
2Department of Civil and Architectural Engineering, Qatar University, Doha, Qatar

Correspondence should be addressed to Abdullah Al Mamun; aq.ude.uq@numama

Received 19 May 2019; Revised 7 July 2019; Accepted 14 July 2019; Published 15 August 2019

Academic Editor: Amparo Alonso-Betanzos

Copyright © 2019 Md Arifuzzaman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The publication of this article was funded by Qatar National Library.

Linked References

  1. Y. Yildirim, “Polymer modified asphalt binders,” Construction and Building Materials, vol. 21, no. 1, pp. 66–72, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Ameri, S. Nowbakht, M. Molayem, and M. R. M. Aliha, “Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes,” Fatigue & Fracture of Engineering Materials & Structures, vol. 39, no. 7, pp. 896–906, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Li, F. Zhang, Y. Liu et al., “Preparation and properties of soybean bio-asphalt/SBS modified petroleum asphalt,” Construction and Building Materials, vol. 201, pp. 268–277, 2019. View at Publisher · View at Google Scholar · View at Scopus
  4. U. Isacsson and X. Lu, “Characterization of bitumens modified with SEBS, EVA and EBA polymers,” Journal of Materials Science, vol. 34, no. 15, pp. 3737–3745, 1999. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Shenoy, “Nonrecovered compliance from dynamic oscillatory testvis-à-visnonrecovered compliance from multiple stress creep recovery test in the dynamic shear rheometer,” International Journal of Pavement Engineering, vol. 9, no. 5, pp. 329–341, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Özen, A. Aksoy, S. Tayfur, and F. Çelik, “Laboratory performance comparison of the elastomer-modified asphalt mixtures,” Building and Environment, vol. 43, no. 7, pp. 1270–1277, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. R. A. Tarefder and A. M. Zaman, “Nano-scale Evaluation of Moisture Damage in Asphalt,” Journal of Materials in Civil Engineering, vol. 22, no. 7, pp. 714–725, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. A. A. Mamun and H. I. Al-Abdul Wahhab, “Comparative laboratory evaluation of waste cooking oil rejuvenated asphalt concrete mixtures for high contents of reclaimed asphalt pavement,” International Journal of Pavement Engineering, pp. 1–12, 2018. View at Google Scholar
  9. A. A. Mamun and H. I. Al-Abdul Wahhab, “Evaluation of waste engine oil-rejuvenated asphalt concrete mixtures with high RAP content,” Advances in Materials Science and Engineering, vol. 2018, Article ID 7386256, 8 pages, 2018. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Teizer, M. Venugopal, W. Teizer, and J. Felkl, “Nanotechnology and its impact on construction: bridging the gap between researchers and industry professionals,” Journal of Construction Engineering and Management, vol. 138, no. 5, pp. 594–604, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Zheng and C. A. Wilkie, “Flame retardancy of polystyrene nanocomposites based on an oligomeric organically-modified clay containing phosphate,” Polymer Degradation and Stability, vol. 81, no. 3, pp. 539–550, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. M. W. Simon, K. T. Stafford, and D. L. Ou, “Nanoclay reinforcement of liquid silicone rubber,” Journal of Inorganic and Organometallic Polymers and Materials, vol. 18, no. 3, pp. 364–373, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Yang, J. Hollar, and X. Shi, “Surface-sulfonated polystyrene microspheres improve crack resistance of carbon microfiber-reinforced Portland cement mortar,” Journal of Materials Science, vol. 45, no. 13, pp. 3497–3505, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. X. X. Zhou, G. F. Zhang, R. M. Liu, and L. Zheng, “Molecular simulations of anti-aging mechanisms on nano-LDHs modified asphalt,” Key Engineering Materials, vol. 599, pp. 198–202, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Veytskin, C. Bobko, C. Castorena, and Y. R. Kim, “Nanoindentation investigation of asphalt binder and mastic cohesion,” Construction and Building Materials, vol. 100, pp. 163–171, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. A. N. Amirkhanian, F.-P. Xiao, and S. N. Amirkhanian, “Characterization of unaged asphalt binder modified with carbon nano particles,” International Journal of Pavement Research and Technology, vol. 4, no. 5, pp. 281–286, 2011. View at Google Scholar
  17. J. Yang and S. Tighe, “A review of advances of nanotechnology in asphalt mixtures,” Procedia—Social and Behavioral Sciences, vol. 96, pp. 1269–1276, 2013. View at Publisher · View at Google Scholar
  18. F. Xiao, A. N. Amirkhanian, and S. N. Amirkhanian, “Long-term ageing influence on rheological characteristics of asphalt binders containing carbon nanoparticles,” International Journal of Pavement Engineering, vol. 12, no. 6, pp. 533–541, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Xiao, A. N. Amirkhanian, and S. N. Amirkhanian, “Influence of carbon nanoparticles on the rheological characteristics of short-term aged asphalt binders,” Journal of Materials in Civil Engineering, vol. 23, no. 4, pp. 423–431, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. M. J. Khattak, A. Khattab, H. R. Rizvi, and P. Zhang, “The impact of carbon nano-fiber modification on asphalt binder rheology,” Construction and Building Materials, vol. 30, pp. 257–264, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. U. Gazder, M. Arifuzzaman, U. Shahid, and A. A. Mamun, “Effect of fly ash and lime as mineral filler in asphalt concrete,” in Proceedings of the Advances in Materials and Pavement Performance Prediction, pp. 373–377, CRC Press, Doha, Qatar, April 2018.
  22. A. A. Mamun, M. Arifuzzaman, and R. Taha, “Nano scale aging characterization of carbon nanotube modified asphalt binders,” in Proceedings of the Advances in Materials and Pavement Performance Prediction, pp. 403–406, CRC Press, Doha, Qatar, April 2018.
  23. M. R. Hassan, A. A. Mamun, M. I. Hossain, and M. Arifuzzaman, “Moisture damage modeling in lime and chemically modified asphalt at nanolevel using ensemble computational intelligence,” Computational Intelligence and Neuroscience, vol. 2018, Article ID 7525789, 9 pages, 2018. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Arifuzzaman and M. R. Hassan, “Moisture damage prediction of polymer modified asphalt binder using support vector regression,” Journal of Computational and Theoretical Nanoscience, vol. 11, no. 10, pp. 2221–2227, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Arifuzzaman, M. S. Islam, and M. I. Hossain, “Moisture damage evaluation in SBS and lime modified asphalt using AFM and artificial intelligence,” Neural Computing and Applications, vol. 28, no. 1, pp. 125–134, 2017. View at Publisher · View at Google Scholar · View at Scopus
  26. M. R. Hassan, “Modeling of moisture damage in carbon nano tube modified asphalt using hybrid of artificial neural network and other computational intelligence approaches,” Journal of Computational and Theoretical Nanoscience, vol. 12, no. 11, pp. 4927–4934, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Arifuzzaman, “Advanced ANN prediction of moisture damage in CNT modified asphalt binder,” Soft Computing in Civil Engineering, vol. 1, no. 1, pp. 1–11, 2017. View at Google Scholar
  28. F. Dong, W. Zhao, Y. Zhang et al., “Influence of SBS and asphalt on SBS dispersion and the performance of modified asphalt,” Construction and Building Materials, vol. 62, pp. 1–7, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. M. M. J. Treacy, T. W. Ebbesen, and J. M. Gibson, “Exceptionally high Young’s modulus observed for individual carbon nanotubes,” Nature, vol. 381, no. 6584, pp. 678–680, 1996. View at Publisher · View at Google Scholar · View at Scopus
  30. R. Tarefder, H. Faisal, and H. Sobien, “Nanomechanical characterization effect of mica and aging on asphalt binder,” Journal of Materials in Civil Engineering, vol. 26, no. 9, Article ID 04014063, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. M. D. Nazzal, W. Mogawer, S. Kaya, and T. Bennert, “Multiscale evaluation of the composite asphalt binder in high–reclaimed asphalt pavement mixtures,” Journal of Materials in Civil Engineering, vol. 26, no. 7, Article ID 04014019, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. M. R. Mitchell, R. E. Link, M. D. Nazzal, S. Sargand, and A. Al-Rawashdeh, “Evaluation of warm mix asphalt mixtures containing RAP using accelerated loading tests,” Journal of Testing and Evaluation, vol. 39, no. 3, Article ID 103158, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. A. T. Pauli, R. W. Grimes, A. G. Beemer, T. F. Turner, and J. F. Branthaver, “Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy,” International Journal of Pavement Engineering, vol. 12, no. 4, pp. 291–309, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. D. M. Abd, H. Al-Khalid, and R. Akhtar, “Adhesion properties of warm-modified bituminous binders (WMBBs) determined using pull-off tests and atomic force microscopy,” Road Materials and Pavement Design, vol. 19, no. 8, pp. 1926–1939, 2018. View at Google Scholar
  35. L. Bo, C. Yujiao, L. Xiang, L. Hailian, and L. Xiaomin, “Effect of material composition on nano-adhesive characteristics of styrene-butadiene-styrene copolymer-modified bitumen using atomic force microscope technology,” International Journal of Adhesion and Adhesives, vol. 89, pp. 168–173, 2019. View at Publisher · View at Google Scholar · View at Scopus
  36. R. A. Tarefder, S. Ahsan, and M. Arifuzzaman, “Using a neural network model to assess the effect of antistripping agents on the performance of moisture-conditioned asphalt,” Journal of Materials in Civil Engineering, vol. 29, no. 4, Article ID 04016250, 2017. View at Publisher · View at Google Scholar · View at Scopus
  37. A. A. Mamun and M. Arifuzzaman, “Nano-scale moisture damage evaluation of carbon nanotube-modified asphalt,” Construction and Building Materials, vol. 193, pp. 268–275, 2018. View at Publisher · View at Google Scholar · View at Scopus
  38. S. Biggs and P. Mulvaney, “Measurement of the forces between gold surfaces in water by atomic force microscopy,” The Journal of Chemical Physics, vol. 100, no. 11, pp. 8501–8505, Jun. 1994. View at Publisher · View at Google Scholar · View at Scopus
  39. H. Gong, Y. Sun, X. Shu, and B. Huang, “Use of random forests regression for predicting IRI of asphalt pavements,” Construction and Building Materials, vol. 189, pp. 890–897, 2018. View at Publisher · View at Google Scholar · View at Scopus
  40. K. Shaaban and A. Pande, “Classification tree analysis of factors affecting parking choices in Qatar,” Case Studies on Transport Policy, vol. 4, no. 2, pp. 88–95, 2016. View at Publisher · View at Google Scholar · View at Scopus
  41. Q. Dong, C. Dong, and B. Huang, “Statistical analyses of field serviceability of throw-and-roll pothole patches,” Journal of Transportation Engineering, vol. 141, no. 9, Article ID 04015017, 2015. View at Publisher · View at Google Scholar · View at Scopus
  42. M. Kayhanian, D. Anderson, J. T. Harvey, D. Jones, and B. Muhunthan, “Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots,” Journal of Environmental Management, vol. 95, no. 1, pp. 114–123, 2012. View at Google Scholar
  43. X. Wang, D. C. Montgomery, and E. B. Owusu-Antwi, Application of Regression Trees to LTPP Data Analysis, Arizona State University, Tempe, Arizona, 2003.
  44. M. Kang, M. Kim, and J. H. Lee, “Analysis of rigid pavement distresses on interstate highway using decision tree algorithms,” KSCE Journal of Civil Engineering, vol. 14, no. 2, pp. 123–130, 2010. View at Google Scholar
  45. D. Kaur and H. Pulugurta, “Comparitive analysis of fuzzy decision tree and logistic regression methods for pavement treatment prediction,” WSEAS Transactions on Information Science & Applications, vol. 5, no. 6, pp. 979–990, 2008. View at Google Scholar
  46. R. A. Tarefder and S. Ahsan, “Neural network modelling of asphalt adhesion determined by AFM,” Journal of Microscopy, vol. 254, no. 1, pp. 31–41, 2014. View at Publisher · View at Google Scholar · View at Scopus
  47. T. Hayes, S. Usami, R. Jacobucci, and J. J. McArdle, “Using Classification and Regression Trees (CART) and random forests to analyze attrition: results from two simulations,” Psychology and Aging, vol. 30, no. 4, pp. 911–929, 2015. View at Publisher · View at Google Scholar · View at Scopus