Research Article
Gradient Boosted Trees Predictive Models for Surface Roughness in High-Speed Milling in the Steel and Aluminum Metalworking Industry
Table 4
Examples of cutting conditions of geometries and Ra values in Exp-2.
| Machine | F (mm minā1) | diam (mm) | ae (mm) | ap (mm) | HB | n (rpm) | Ra (nm) |
| M1 | 500 | 10 | 10 | 10 | 111 | 8000 | Smooth | 675 | 10 | 10 | 5 | 110 | 8000 | Smooth | 750 | 10 | 5 | 10 | 111 | 8000 | Smooth | 550 | 12 | 10 | 5 | 112 | 8000 | Smooth | 675 | 12 | 5 | 10 | 111 | 8000 | Fine | 750 | 12 | 5 | 5 | 110 | 8000 | Fine | 500 | 12 | 10 | 10 | 111 | 9600 | Fine | 675 | 12 | 5 | 5 | 111 | 9600 | Fine | 750 | 12 | 10 | 10 | 111 | 9600 | Fine |
| M2 | 500 | 12 | 10 | 10 | 85 | 12000 | Smooth | 675 | 12 | 10 | 5 | 85 | 12000 | Smooth | 750 | 12 | 10 | 10 | 85 | 15000 | Fine | 500 | 16 | 10 | 5 | 85 | 15000 | Smooth | 675 | 16 | 5 | 10 | 85 | 15000 | Smooth | 750 | 16 | 5 | 5 | 85 | 15000 | Smooth | 500 | 20 | 5 | 10 | 85 | 15000 | Smooth | 675 | 20 | 5 | 5 | 87 | 15000 | Smooth |
|
|