Table of Contents
Conference Papers in Energy
Volume 2013, Article ID 267095, 10 pages
http://dx.doi.org/10.1155/2013/267095
Conference Paper

A Finite Element Approach for the Elastic-Plastic Behavior of a Steel Pipe Used to Transport Natural Gas

Department of Mathematics and Statistics, University of Cyprus, P.O. Box 24908, 1305 Nicosia, Cyprus

Received 14 March 2013; Accepted 28 April 2013

Academic Editors: P. Demokritou, A. Poullikkas, and C. Sourkounis

This Conference Paper is based on a presentation given by Miltiades C. Elliotis at “Power Options for the Eastern Mediterranean Region” held from 19 November 2012 to 21 November 2012 in Limassol, Cyprus.

Copyright © 2013 Miltiades C. Elliotis. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, McGraw-Hill, New York, NY, USA, 1951.
  2. F. P. Beer and E. R. Johnston, Mechanics of Materials, McGraw-Hill, New York, NY, USA, 1981.
  3. Y. C. Fung, Foundations of Solid Mechanics, Prentice-Hall, Englewood Cliffs, NJ, USA, 1977.
  4. J. Argyris, Energy Theorems and Structural Analysis, Butterworths Sc. Publications, London, UK, 1960.
  5. O. C. Zienkiewicz and R. L. Taylor, The Finite Element Method for Solid and Structural Mechanics, Elsevier Eds, 6th edition, 2005.
  6. I. Babuška, U. Banerjee, and J. E. Osborn, “Generalized finite element methods: main ideas, results and perspective,” International Journal of Computational Methods, vol. 1, no. 1, pp. 67–103, 2004. View at Google Scholar
  7. K. J. Bathe, Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ, USA, 1996.
  8. R. Hill, The Mathematical Theory of Plasticity, Oxford University Press, Oxford, UK, 1950.
  9. W. Prager, An Introduction to Plasticity, Addison-Wesley, Amsterdam, The Netherlands, 1959.
  10. K. J. Bath and E. L. Wilson, Numerical Methods in Finite Element Analysis, Prentice-Hall, Englewood Cliffs, NJ, USA, 1977.
  11. E. Hinton and D. R. J. Owen, Finite Element Programming, Academic Press, London, UK, 1977.
  12. P. W. Bridgman, Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York, NY, USA, 1952.
  13. R. Von Mises, “Mechanik der festen Körper im plastisch- deformablen Zustand,” Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse, vol. 1, pp. 582–592, 1913. View at Google Scholar
  14. D. C. Drucker, “A more fundamental approach to plastic stress-strain relations,” in Proceedings of the 1st US National Congress of Applied Mechanics, pp. 487–491, Chicago, Ill, USA, 1951.
  15. O. C. Zienkiewicz, S. Valliappan, and I. P. King, “Elasto-plastic solutions of engineering problems; initial stress finite element approach,” International Journal for Numerical Methods in Engineering, vol. 1, pp. 75–100, 1969. View at Google Scholar
  16. Q. S. Nguyen, “On shakedown analysis in hardening plasticity,” Journal of the Mechanics and Physics of Solids, vol. 51, no. 1, pp. 101–125, 2003. View at Publisher · View at Google Scholar · View at Scopus