Table of Contents
Conference Papers in Energy
Volume 2013, Article ID 437674, 9 pages
http://dx.doi.org/10.1155/2013/437674
Conference Paper

Grid Code Requirements for Wind Power Integration in Europe

Institute for Power System Technology and Power Mechatronics, Ruhr-University Bochum, Germany

Received 11 December 2012; Accepted 14 March 2013

Academic Editors: Y. Al-Assaf, P. Demokritou, and A. Poullikkas

This Conference Paper is based on a presentation given by Pavlos Tourou at “Power Options for the Eastern Mediterranean Region” held from 19 November 2012 to 21 November 2012 in Limassol, Cyprus.

Copyright © 2013 Constantinos Sourkounis and Pavlos Tourou. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. World Wind Energy Association, “World wind energy report 2011,” May 2012, http://www.wwindea.org/webimages/WorldWindEnergyReport2011.pdf.
  2. Global Wind Energy Council, “Global Wind Report: Annual market update 2011,” March 2012, http://gwec.net/wp-content/uploads/2012/06/Annual_report_2011_lowres.pdf.
  3. European Wind Energy Association, “Wind energy and EU climate policy,” October 2011, http://www.ewea.org/fileadmin/ewea_documents/documents/publications/reports/20110909_ClimateReport.pdf.
  4. T. Ackermann, Wind Power in Power Systems, John Wiley & Sons, 2005.
  5. I. Erlich, W. Winter, and A. Dittrich, “Advanced grid requirements for the integration of wind turbines into the German transmission system,” in Proceedings of the IEEE Power Engineering Society General Meeting (PES '06), p. 7, June 2006. View at Scopus
  6. M. Molinas, J. A. Suul, and T. Undeland, “Low voltage ride through of wind farms with cage generators: STATCOM versus SVC,” IEEE Transactions on Power Electronics, vol. 23, no. 3, pp. 1104–1117, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Müller, M. Deicke, and R. W. De Doncker, “Doubly fed induction generator systems for wind turbines,” IEEE Industry Applications Magazine, vol. 8, no. 3, pp. 26–33, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Sourkounis and B. Ni, “Influence of wind-energy-converter control methods on the output frequency components,” IEEE Transactions on Industry Applications, vol. 45, no. 6, pp. 2116–2122, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. J. López, P. Sanchis, X. Roboam, and L. Marroyo, “Dynamic behavior of the doubly fed induction generator during three-phase voltage dips,” IEEE Transactions on Energy Conversion, vol. 22, no. 3, pp. 709–717, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Pannell, D. J. Atkinson, and B. Zahawi, “Minimum-threshold crowbar for a fault-ride-through grid-code-compliant DFIG wind turbine,” IEEE Transactions on Energy Conversion, vol. 25, no. 3, pp. 750–759, 2010. View at Publisher · View at Google Scholar · View at Scopus