Table of Contents
Conference Papers in Materials Science
Volume 2013 (2013), Article ID 750802, 5 pages
http://dx.doi.org/10.1155/2013/750802
Conference Paper

A Mechanical Analysis of In Situ Polymerized Poly(butylene terephthalate) Flax Fiber Reinforced Composites Produced by RTM

1Department of Mechanical Engineering and Industrial Management (DEMGI), School of Technology and Management, Polytechnic Institute of Viseu, 3504-510 Viseu, Portugal
2Institute of Mechanical Engineering and Industrial Management (INEGI), University of Porto, 4200-465 Porto, Portugal
3Department of Mechanical Engineering (DEMec), Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal

Received 16 September 2013; Accepted 18 November 2013

Academic Editors: R. Fangueiro, H. Hong, and A. T. Marques

This Conference Paper is based on a presentation given by C. Romão at “International Conference on Natural Fibers—Sustainable Materials for Advanced Applications 2013” held from 9 June 2013 to 11 June 2013 in Guimarães, Portugal.

Copyright © 2013 C. Romão et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

C. Romão, C. M. C. Pereira, and J. L. Esteves, “A Mechanical Analysis of In Situ Polymerized Poly(butylene terephthalate) Flax Fiber Reinforced Composites Produced by RTM,” Conference Papers in Materials Science, vol. 2013, Article ID 750802, 5 pages, 2013. doi:10.1155/2013/750802