Table of Contents
Conference Papers in Science
Volume 2015, Article ID 276374, 10 pages
http://dx.doi.org/10.1155/2015/276374
Conference Paper

Effect of Dilution on Microstructure and Wear Resistance of a Fe-Based Hardfacing Alloy with a High Amount of Carbide-Forming Elements

1Dipartimento di Meccanica, Politecnico di Milano, Milan, Italy
2Bernex Bimetallic S.r.o., Modrice Bei Brno, Czech Republic

Received 1 August 2014; Revised 23 September 2014; Accepted 7 October 2014

Academic Editor: Martin Dienwiebel

This Conference Paper is based on a presentation given by M. Vedani at “European Symposium on Friction, Wear, and Wear Protection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany.

Copyright © 2015 L. Rovatti et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. O. Correa, N. G. Alcântara, D. G. Tecco, and R. V. Kumar, “The relationship between the microstructure and abrasive resistance of a hardfacing alloy in the Fe-Cr-C-Nb-V system,” Metallurgical and Materials Transactions A, vol. 38, no. 8, pp. 1671–1680, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Berns, “Comparison of wear resistant MMC and white cast iron,” Wear, vol. 254, no. 1-2, pp. 47–54, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. R. J. Chung, X. Tang, D. Y. Li, B. Hinckley, and K. Dolman, “Microstructure refinement of hypereutectic high Cr cast irons using hard carbide-forming elements for improved wear resistance,” Wear, vol. 301, no. 1-2, pp. 695–706, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. T. T. Matsuo, C. S. Kiminami, W. J. B. Fo, and C. Bolfarini, “Sliding wear of spray-formed high-chromium white cast iron alloys,” Wear, vol. 259, no. 1–6, pp. 445–452, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Lee, S.-H. Choo, E.-R. Baek, S. Ahn, and N. J. Kim, “Correlation of microstructure and fracture toughness in high-chromium white iron hardfacing alloys,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 27, no. 12, pp. 3881–3891, 1996. View at Publisher · View at Google Scholar · View at Scopus
  6. L. St-Georges, “Development and characterization of composite Ni-Cr + WC laser cladding,” Wear, vol. 263, no. 1–6, pp. 562–566, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Valsecchi, B. Previtali, and E. Gariboldi, “Fibre laser cladding of turbine blade leading edges: the effect of specific energy on clad dilution,” International Journal of Structural Integrity, vol. 3, no. 4, pp. 377–395, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Lucey, R. Wuhrer, K. Moran, M. Reid, P. Huggett, and M. Cortie, “Interfacial reactions in white iron/steel composites,” Journal of Materials Processing Technology, vol. 212, no. 11, pp. 2349–2357, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. I. Hemmati, V. Ocelík, and J. T. M. De Hosson, “Effects of the alloy composition on phase constitution and properties of laser deposited Ni-Cr-B-Si coatings,” Physics Procedia, vol. 41, pp. 302–311, 2013. View at Publisher · View at Google Scholar
  10. J. Campbell, Castings, Butterworth Heinemann, Oxford, UK, 2nd edition, 2003.
  11. C.-M. Chang, C.-M. Lin, C.-C. Hsieh, J.-H. Chen, and W. Wu, “Micro-structural characteristics of Fe-40 wt%Cr-xC hardfacing alloys with [1.0–4.0 wt%] carbon content,” Journal of Alloys and Compounds, vol. 487, no. 1-2, pp. 83–89, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Hemmati, V. Ocelík, and J. T. M. de Hosson, “Dilution effects in laser cladding of Ni-Cr-B-Si-C hardfacing alloys,” Materials Letters, vol. 84, pp. 69–72, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Röttger, S. Weber, and W. Theisen, “Supersolidus liquid-phase sintering of ultrahigh-boron high-carbon steels for wear-protection applications,” Materials Science and Engineering A, vol. 532, pp. 511–521, 2012. View at Publisher · View at Google Scholar · View at Scopus