Table of Contents
Conference Papers in Science
Volume 2015, Article ID 496515, 6 pages
http://dx.doi.org/10.1155/2015/496515
Conference Paper

A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation

Institute of Metal Forming (IBF), RWTH Aachen University, Intzestraße 10, 52056 Aachen, Germany

Received 31 July 2014; Accepted 20 November 2014

Academic Editor: Matthias Scherge

This Conference Paper is based on a presentation given by Marco Teller at “European Symposium on Friction, Wear, and Wear Protection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany.

Copyright © 2015 Marco Teller et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Marco Teller, Simon Seuren, Markus Bambach, and Gerhard Hirt, “A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation,” Conference Papers in Science, vol. 2015, Article ID 496515, 6 pages, 2015. https://doi.org/10.1155/2015/496515.