Corrective Intra-Articular Osteotomy Using a 3D-Printed Model and Induced Membrane Technique for AO/OTA C3 Distal Femur Fracture with Articular Malunion and Metaphyseal Nonunion

<div>Preoperative 3D-printed model. A 3D-printed model was useful for visualizing metaphyseal nonunion (a) and articular malunion compared to the mirror image of the unaffected knee (b, c).</div>

Case Reports in Orthopedics

fig3

Figure 3

Figure 3: Corrective Intra-Articular Osteotomy Using a 3D-Printed Model and Induced Membrane Technique for AO/OTA C3 Distal Femur Fracture with Articular Malunion and Metaphyseal Nonunion 

Figure 3 | Corrective Intra-Articular Osteotomy Using a 3D-Printed Model and Induced Membrane Technique for AO/OTA C3 Distal Femur Fracture with Articular Malunion and Metaphyseal Nonunion 