Research Article
A Case-Based Reasoning Method for Remanufacturing Process Planning
Table 5
The detailed information of case
.
| Serial number | Process name | Device ID | Device name | Device parameters | Fixture | Technical requirements | Remark |
| 1 | Cleaning | Q0008 | Cleaning machine | (1) Water-soluble washing liquid 830LD, (2) maximum washing distance = 1850 mm | Cleaning bracket | (1) Cleaning 6–8 times, (2) cleaning time 3.5–4 min | Handle with collision, cleaning fluid pollution under 2% |
| 2 | Grinding | M0006 | Grinding machine | (1) Wheel rotational speed 2300 r/min, (2) coarse grinding allowance 0.25 mm, feed speed 2.1 mm/min | Grinding machine center frame | (1) Grinding way: cut mill, (2) grinding wheel dressing speed 0.1 m/min | (1) Grinding wheel code G80V60, (2) Injection for pressure 3 Mpa, fluid flow 18 L/min |
| 3 | Plating | D0019 | Plating machine | (1) Electric net fluid TGY-1 voltage 10–14 v, (2) activation solution THY-5 voltage 12–15 v | Plating bath | — | — |
| 4 | Polishing | P0011 | Polishing machine | — | Polishing machine bracket | Polished surface roughness to Ra 0.2 um or less | Polishing to technical cooperation requirements |
|
|