Table of Contents
SRX Engineering
Volume 2010, Article ID 509752, 6 pages
http://dx.doi.org/10.3814/2010/509752
Research Article

Pulsed Nd:YAG Laser Microtexturing AISI-O1 Surface for Thermal Spray Coating

Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon Tong, Kowloon, Hong Kong

Received 16 September 2009; Revised 24 November 2009; Accepted 1 December 2009

Copyright © 2010 Kelvii Wei Guo and Hon Yuen Tam. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. J. Madou, “Microfabrication challenge,” Analytical and Bioanalytical Chemistry, vol. 378, no. 1, pp. 11–14, 2004. View at Publisher · View at Google Scholar
  2. J. J. Mark, Microfabrication and Nanomanufacturing, CRC/Taylor & Francis, Boca Raton, Fla, USA, 2006.
  3. C. Gorecki, A. Sabac, P. Bey, K. Gut, A. Jacobelli, and T. Dean, “Integrated optomechanical sensor for in situ characterization of MEMS: the implementing of a readout architecture,” in Microsystems Engineering: Metrology and Inspection III, C. Gorecki, Ed., vol. 5145 of Proceedings of SPIE, pp. 189–195, Munich, Germany, 2003. View at Publisher · View at Google Scholar
  4. H. J. Fecht and M. Werner, The Nano-Micro Interface: Bridging the Micro and Nano Worlds, Wiley-VCH, Weinheim, Germany, 2004.
  5. S. Lugomer, Laser Technology-Laser Driven Processes, Prentice-Hall, Englewood Cliffs, NJ, USA, 1990.
  6. S. Kurt, R. Wolfgang, and P. Oskar, “Formation of paint surface on different surface structure of steel sheet,” Iron & Steel Engineering, vol. 74, no. 3, pp. 43–49, 1997. View at Google Scholar
  7. G. Ryk, Y. Kligerman, and I. Etsion, “Experimental investigation of laser surface texturing for reciprocating automotive components,” Tribology Transactions, vol. 45, no. 4, pp. 444–449, 2002. View at Google Scholar
  8. W. M. Steen, Laser Material Processing, Springer, London, UK, 3rd edition, 2003.
  9. K. W. Guo, “Effect of polishing parameters on morphology of DF2 (AISI-O 1) steel surface polished by Nd:YAG laser,” Surface Engineering, vol. 25, no. 3, pp. 187–195, 2009. View at Publisher · View at Google Scholar
  10. A. F. Mills, Heat and Mass Transfer, P. R. Donnelly & Sons, Chicago, Ill, USA, 1995.
  11. W. S. Janna, Engineering Heat Transfer, PWS Engineering, Boston, Mass, USA, 1986.