Research Article
A Modeling Study of the Productivity of Horizontal Wells in Hydrocarbon-Bearing Reservoirs: Effects of Fracturing Interference
Table 1
Parameters for the base case of hydraulic fracturing modeling.
| Parameter | Value |
| Young’s modulus (GPa) | 22.41 | Poisson’s ratio | 0.25 | Overburden stress (MPa) | 64 | Initial maximum horizontal stress (MPa) | 70 | Initial minimum horizontal stress (MPa) | 52 | Differential stress (MPa) | 18 | Fracture number in one stage | 3 | Stage number in a horizontal well | 4 | Fracture spacing within one stage | 15 | Spacing between two stages (m) | 60 | Matrix permeability (m2) | | Matrix porosity | 0.1 | Total injection rate (m3/min) | 12 | Fluid viscosity (mPa·s) | 20 | Leak-off coefficient (m/Pa·s) | |
|
|