Abstract

Amanita ponderosa are wild edible mushrooms that grow in some microclimates of Iberian Peninsula. Gastronomically this species is very relevant, due to not only the traditional consumption by the rural populations but also its commercial value in gourmet markets. Mineral characterisation of edible mushrooms is extremely important for certification and commercialization processes. In this study, we evaluate the inorganic composition of Amanita ponderosa fruiting bodies (Ca, K, Mg, Na, P, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Pb, and Zn) and their respective soil substrates from 24 different sampling sites of the southwest Iberian Peninsula (e.g., Alentejo, Andalusia, and Extremadura). Mineral composition revealed high content in macroelements, namely, potassium, phosphorus, and magnesium. Mushrooms showed presence of important trace elements and low contents of heavy metals within the limits of RDI. Bioconcentration was observed for some macro- and microelements, such as K, Cu, Zn, Mg, P, Ag, and Cd. A. ponderosa fruiting bodies showed different inorganic profiles according to their location and results pointed out that it is possible to generate an explanatory model of segmentation, performed with data based on the inorganic composition of mushrooms and soil mineral content, showing the possibility of relating these two types of data.

1. Introduction

Mushrooms are known from ancient times for their medicinal properties and gastronomic properties. Therefore the consumption of edible wild-growing mushrooms has been very popular. The demand for the commercialization of edible wild mushrooms has proved to be a widely expanding business with increasing economic importance in many rural areas of some countries. In recent years, the consumption of edible mushrooms has been increasing and gaining prominence due to their gastronomic potential, also for their both organoleptic properties (texture and pleasant aroma) [14], their chemical composition, mineral content, and nutraceutical value [48]. Mushrooms are an important source of proteins, dietary fibres, and vitamins (B, C, D, E) containing low levels of sugar and fats. They can assimilate large amounts of water and minerals such as phosphorus, iron, potassium, cadmium, magnesium, copper, and zinc, due to the large area of mycelium overgrowing the surface layer of soil [9]. This mycelia network is ideally suited to penetrate and access soil pore spaces and an extensive surface area of fungal hyphae and physiology enable for many species on effective absorption and bioconcentration of various metallic elements, metalloids, and nonmetals [10]. Bioconcentration factor (BCF), the ratio of the element content in fruiting body to the content in underlying substrate, can express the ability of fungi to accumulate elements from substrate, and this capacity of the mushroom is affected by fungal lifestyle, age of fruiting body, specific species and element, and environment such as pH, organic matter, and pollution [9]. Moreover, the symbiotic relationships that some mushrooms species, namely, A. ponderosa, can establish with some plants of their habitats allowing the accumulation of high concentrations of some metals. Therefore, mineral content and organic composition of edible mushrooms are dependent on the species and the characteristics of the ecosystems in which they are inserted [11, 12]. Some minerals are essential elements for the correct human body function, although others may present toxicity [5, 6, 9, 11, 13, 14]. There are many species of edible mushrooms growing wild, and some of them are slightly characterized about minerals content and the potential of heavy metals bioaccumulation such as lead, mercury, cadmium, and silver [5, 13, 1517]. On the other hand, due to the great diversity of wild mushrooms, the similarity between some species and the lack of knowledge of others may lead to intoxication when harvesting wild species, leading in some cases to death [18].

The genus Amanita is one of the best known from Agaricales order and comprises edible and poisonous mushrooms distributed worldwide, occupying mainly a mycorrhizal habitat and playing a significant role in forest ecosystems [19, 20]. This genus includes important species of edible mushrooms, as is the case of Amanita ponderosa [18, 2024]. The south of Portugal, due to its Mediterranean characteristics and diversity of flora, is one of the regions of Europe with a greater predominance of A. ponderosa wild edible mushrooms [23]. These robust basidiomata grow during spring in mounted areas with acid soils, in forests of holm oaks and cork trees like Quercus ilex and Quercus suber, and with shrubs like Cistus ladanifer, Cistus laurifolius, and Lavandula stoechas establishing a symbiotic relationship with them (Figure 1). Gastronomically, this species is very relevant, not only due to the traditional consumption in the rural populations, but also due to its commercial value in the gourmet markets having high exportation potential in Portugal, thus, the chemical and mineral characterization of numerous species of edible mushrooms for certification purposes and further commercialization process becoming of extreme importance.

In recent years, some artificial intelligence based tools, namely, Data Mining, Artificial Neural Networks (ANNs), and Decision Trees (DTs) have been applied for fungal environment systems [18, 25, 26]. Data mining tools were used in latest studies about A. ponderosa mushrooms in order to establish a bridge of inorganic contents, molecular fingerprints, and geographical sites. In one study a segmentation model based on the molecular analysis was developed, which allowed relating the clusters obtained to the geographical site of sampling. There were also developed explanatory models of the segmentation, using Decision Trees, to relate the molecular and inorganic data, following two different strategies: one based on DNA profile and another based on the mineral composition [22]. Another study based on ANNs exposed the selected model and can predict molecular profile based on inorganic composition with a good match between the observed and predicted values [18].

The aim of this study was to determine the inorganic composition of fruiting bodies of A. ponderosa mushrooms from different sampling sites in the southwest of the Iberian Peninsula, analysing the variations in mineral content. Additionally, the mineral composition of the corresponding soil substrates was analysed in order to correlate with the mineral composition of the fruiting bodies. In the present work, the k-means clustering method was used to study the mineral composition of A. ponderosa fruiting bodies. To explain the segmentation model, that is, in order to obtain rules to assign a case to a cluster DTs were used.

2. Materials and Methods

2.1. Sampling Collection

Fruiting bodies of the Amanita ponderosa mushrooms were collected in spring, between February and April, from 24 different sampling sites, in the southwest of the Iberian Peninsula, namely, 11 samples collected from Alto Alentejo region and 10 from Baixo Alentejo, Portugal, 2 samples collected from Andalusia and 1 from Extremadura, Spain (Table 1). These mushrooms were collected in acid soils, in forests of Quercus suber, Q. ilex ssp. ballota, Cistus ladanifer, and Cistus laurifolius (Figure 1).

Three individuals in the same growth stage were selected per each sampling site to avoid the effect of size. Fruiting bodies were identified by a specialist, based on morphological features according to taxonomic description of A. ponderosa [27]. During the collection process fruiting bodies were placed in wicker baskets and samples were transported in refrigerated containers and deposited in the Biotechnology Laboratory of Chemistry Department of University of Évora (Portugal). In parallel, soil samples were randomly collected from the surrounding soil of fruiting bodies of each site.

Fruiting bodies samples were weighed and carefully washed with double distilled water and representative samples of each sampling site were catalogued, stored in sterile bags, and preserved at −20°C for its inorganic study. The sheath was eliminated during the pretreatment of fruiting bodies samples, since it is not usually consumed.

Soil substrates were sampled (0–15 cm), after removing some visible organisms, small stones, sticks, and leaves. Samples were air-dried in room temperature for 1-2 weeks and, subsequently, sieved through a pore size of 2 mm and stored at −4°C.

2.2. Inorganic Characterization

Mineral composition was determined in A. ponderosa fruiting bodies and respective soil collected in 24 different sampling sites described, using different analytical techniques: Flame Atomic Absorption Spectrometry (FAAS), Flame Emission Photometry (FEP), and UV-Vis molecular absorption spectrometry.

2.2.1. Treatment of Samples

Mineral composition analysis of fruiting bodies was performed by the dry mineralization method [28]. Three samples of mushrooms from each sampling site (25 g, fresh weight) were dried in a furnace at 100°C to constant weight (48 h) from which the moisture content was calculated. Samples were homogenized, transferred to porcelain crucibles, and incinerated in a muffle furnace (Termolab) at 460°C for 14 h. In order to determine the organic matter and mineral content in mushrooms samples, ashes were weighted at constant weight. Afterwards, ashes were bleached after cooling by adding 2 M nitric acid, drying them on thermostatic hotplates, and maintaining them at 460°C for 1 h. Ashes recovery was performed with 15 mL of 0.1 M nitric acid and stored at 4°C until analyses.

Three soil samples (5 g dw) collected from each sampling site were cold treated with an extracting solution of 25% nitric acid (HNO3) (40 ml) and shaking with orbital agitation for 24 h at room temperature. The extracts obtained after filtering through Whatman No. 42 filter paper were stored into polyethylene bottles and stored at 4°C until analyses [11].

2.2.2. Analytical Determinations

Aluminium (Al), barium (Ba), calcium (Ca), cadmium (Cd), lead (Pb), copper (Cu), chromium (Cr), iron (Fe), magnesium (Mg), manganese (Mn), silver (Ag), and zinc (Zn) contents were quantified by flame atomic absorption spectrometry (Perkin-Elmer 3100 model) with atomization in an air-acetylene flame and single element hollow cathode lamps and background correction with deuterium lamp for manganese. For the determinations of calcium and magnesium, strontium chloride (SrCl2) was added to make up a final concentration of 0.1125% of the sample, in order to prevent anionic interferences which might modify the result [29].

Sodium (Na) and potassium (K) were quantified by flame emission photometry with a Jenway model PFP7 flame emission photometer [30, 31]. Phosphorus (P) was quantified by vanadomolybdophosphoric acid colorimetric method, using a spectrophotometer (Hitachi, U-3010 model) [32].

All sample determinations were performed in triplicate for each one of the three independent ash extracts of mushroom samples from 24 sampling sites () and for three extracts of each soil substrate (). Concentration values were calculated through the standard curves for each element expressed in mg/kg dw. The bioconcentration factor (BCF) value, which is the quotient of the concentration in fruiting bodies divided by the concentration in the soil substrates, was determined for all minerals in each sampling site.

2.3. Data Mining
2.3.1. Cluster Analysis

In the present study a cluster analysis was carried out. The technique applied in order to build up clusters was the k-means clustering method [33] and the software used was WEKA [34]. In WEKA Simple k-means algorithm the normalization of the numerical attributes is carried out automatically when the Euclidean distance is computed. A more detailed description of the mentioned algorithm can be found in Witten [35].

2.3.2. Decision Trees

In the k-means clustering method clusters were formed without information about the groups and their characteristics. Therefore, it is necessary to understand how the clusters were formed. To attain such a purpose Decision Trees (DTs) were used. In this study the algorithm used to generate DTs was the WEKA J48 [34], corresponding to the 8th revision of the C4.5 algorithm. The detailed description of the J48 algorithm can be found in Witten et al. [35].

2.4. Statistical Analysis

Data were evaluated statistically using the SPSS® 21.0 software Windows Copyright©, (Microsoft Corporation), by descriptive parameters and by one-way ANOVA in order to determine statistically significant differences at the 95% confidence level (). The homogeneity of the population variances was confirmed by the Levene test and the multiple comparisons of media were evaluated by Tukey’s test.

3. Results

3.1. Fruiting Bodies and Soil Substrates’ Mineral Composition

Mineral analysis of A. ponderosa mushrooms samples collected from 24 sampling sites of Alentejo (Portugal), Andalusia, and Extremadura (Spain) regions was evaluated.

Table 2 shows the contents in moisture, organic content, and minerals present in the samples of A. ponderosa collected in the different places. Moisture content ranged from to % (Table 2). The analyses of variance (one-way ANOVA) showed that A. ponderosa fruiting bodies samples collected in Almendres (1) and Serpa (20) presented significantly higher values compared to the other samples, while the sample from Mina S. Domingos (11) showed moisture content significantly lower than the remaining samples. Dry weight values, for several samples, ranged between and %, consisting in organic content values between and % and minerals between and %. Fruiting bodies samples collected in Almendres (1) and Serpa (20) presented values of organic content significantly lower and the sample collected in the Mina S. Domingos (11) significantly higher than all analysed samples (). The mineral content of the fruiting bodies collected in Cabezas Rubias (6) was %, a value significantly higher than the remaining samples. However, the samples from Serpa (20) and Villanueva del Fresno (24) showed the lowest values, significantly different from the another samples ().

Figure 2 shows the average contents of water, dry weight, organic content, and minerals present in the 24 samples of A. ponderosa analysed. The fruiting bodies presented water content, corresponding to 90.3 to 93.1% of their fresh weight. The organic matter content ranged between 6.2 and 9% and mineral content between 0.5 and 0.9%. Thus, 100 g of edible A. ponderosa mushrooms corresponds to a maximum of 9 g of macronutrients, such as lipids, carbohydrates, and proteins, and less than 1 g of mineral content. These values were similar to those observed in a study with mushrooms harvested in some regions of Andalusia (water content 87.8%, organic content 11.8%, carbohydrates 6.6%, proteins 3.2%, lipids 0.5%, fibre 1.5%, and mineral content 0.4%) [24] and these fruiting bodies have a caloric content of 42 kcal/100 g of mushroom, similar to other edible mushroom species, characterized as low calorie foods [8, 28, 36].

Tables 36 show the mineral content of 24 sampling sites of A. ponderosa fruiting bodies as well as their corresponding soil samples. The studied A. ponderosa fruiting bodies showed higher mineral content in macroelements calcium (Ca), magnesium (Mg), sodium (Na), potassium (K), phosphorus (P), and microelements aluminium (Al), copper (Cu), and iron (Fe) (Tables 3 and 4). Potassium was present in higher concentrations and was higher in Cabezas Rubias (6) fruiting bodies,  mg/kg dw. The samples showed lower values of the trace elements silver (Ag), barium (Ba), cadmium (Cd), chromium (Cr), manganese (Mn), lead (Pb), and zinc (Zn) (Tables 5 and 6).

Minerals contents of A. ponderosa fruiting bodies and their corresponding soil samples presented significant differences for all the studied elements (). Cabezas Rubias (6) presented significantly higher aluminium and calcium contents (). The cadmium content was significantly higher () in the fruiting bodies collected in N. Machede (16) and Almendres (1). Samples from Évora (7), Cabezas Rubias (6), and Villanueva del Fresno (24) showed similar chromium contents (), which were significantly higher than the others A. ponderosa fruiting bodies (). Results obtained for soil mineral content showed some significant differences between sampling sites (). The sample collected in N. Machede (16) presented significant different contents of silver, aluminium, and magnesium (). The Montejuntos sample (14) presented significantly differences of aluminium, iron, phosphorus, and magnesium contents () and Villanueva del Fresno (24) presented significant differences for barium and manganese (). Significant differences in copper content were observed for da Mitra sample (9). Mértola sample (10) presented significant differences in zinc and Baleizão sample (3) in potassium contents (). Serpa samples (20), presented significant differences in calcium, chromium, iron, magnesium, sodium, and zinc (). Almendres (1), Évora (7), Novo (13) and Valverde (22) samples did not present significant differences for the iron content (). Samples of Cabezas Rubias (6), Serpa (20), and Rosal de la Frontera (17) did not present significant differences in lead content (). Concerning phosphorus content, two groups with no significant differences () were observed, one including Baleizão (3) and Rosal de la Frontera (17) and the other group including Aleixo Restauração (18), S. Miguel de Machede (19), and Vila Nueva del Fresno (24) samples. Finally, samples from Baleizão (3) and Valverde (22) did not present significant differences in sodium and potassium content ().

In fact, mineral content of A. ponderosa fruiting bodies and their soil samples (Figure 3) varied very similarly for almost all the analysed elements, indicating the influence of the substrate characteristics on the composition of mushrooms samples collected at the different sites.

Mushrooms have a specialized mechanism to accumulate nutrients and minerals in their fruiting bodies. The age of the fruiting body or its size may contribute to mineral composition. Thus, A. ponderosa mushrooms analysed in this study were obtained at the same development stage, in order to eliminate possible size interferences in the comparison of their mineral content. Macroelements content, such as Ca, Mg, Na, K, and P, in fruiting bodies were similar to those reported in literature for A. ponderosa [28] and for other edible mushrooms species [5, 3638]. The calcium and phosphorus contents for the different samples studied were and  mg/kg dw. Potassium and sodium, minerals responsible for the hydroelectrolytic balance maintenance and important enzyme cofactors, have high RDIs (Recommended Daily Intakes), which are 4700 mg/day and 2000 mg/day, respectively, for an adult [39]. Potassium and sodium levels of A. ponderosa mushrooms studied were and  mg/kg dw, respectively. Potassium content ranged from to  mg/Kg dw, presenting values similar to those described by Moreno-Rojas et al. [28], that report potassium levels ranging between and  mg/Kg dw. However, the low K levels observed for fruiting bodies from three sampling sites can be correlated with the large differences observed for potassium content in the surrounding substrates. Magnesium also plays an important role in large number of biological functions, particularly linked to energy metabolism, it is required for the proper function of certain enzymes as cofactor, and structural functions, the recommended magnesium intakes for adult (19–65 years), are 220–260 mg/day [40]. The mean magnesium content in the fruiting bodies was  mg/kg dw, similar to that described in the literature [28].

A. ponderosa fruiting bodies presented values of trace minerals smaller than those found in other species of edible mushrooms [6, 11, 14, 38, 41]. Concentrations of trace elements in fruiting bodies are generally species-dependent [36]; however only one study of A. ponderosa mushrooms is reported [28]. The existence of higher metal concentrations in younger fruiting bodies can be explained by the transport of metals from the mycelium to the fruiting body during the beginning of fructification [36]. Trace elements like Fe, Cu, Zn, Cr, and Mn are essential metals since they play an important role in biological systems; however, these trace metals can also produce toxic effects when intake is excessively amount [38, 42, 43]. Copper is the third most abundant trace element found in the human body, and being an important element of several enzymes, it is also one of the agents involved in iron metabolism [42]. Iron is a component of haemoglobin and myoglobin, proteins responsible for transporting oxygen to tissues. It also participates in protein metabolism, energy production in cells and in various enzymatic reactions [44]. The copper content was  mg/kg dw, and the highest value was found in A. ponderosa samples collected from Rosal de la Frontera (17) ( mg/kg dw). The iron content in A. ponderosa mushrooms was  mg/kg dw. Copper levels were similar and iron levels are slightly lower than those described for Amanita spp. [5, 28]. The adult RDI is 2 mg/day for Cu and 18 mg/day for Fe [12, 39], so the concentrations of copper and iron present in these edible mushrooms are not considered to be a health risk. Manganese and zinc are important trace elements for the human organism, participating in macronutrients and nucleic acids metabolism and promoting several enzyme activity processes [14, 45, 46]. These elements can be accumulated by mushrooms and the recommended daily intakes were 2 mg/day and 15 mg/day, for manganese and zinc, respectively [12, 39]. In this study, mushrooms presented a mean value of  mg/kg dw for manganese and  mg/kg dw for zinc content, similar to values described in literature [5, 6, 11, 36, 47]. Chromium biological functions are not known precisely; it seems to participate in the metabolism of lipids and carbohydrates, as well as in the insulin action. The RDI for this metal is 120 μg/day. The mean chromium content obtained was 1,,74 mg/kg dw, lower than those reported in the literature for other species of Amanita [5] and similar to some species of edible mushrooms described [11, 36]. Aluminium is one of the few abundant elements in nature but no significant biological function is known, although there are some evidences of toxicity when ingested in large quantities. Most acidic soils are saturated in aluminium instead of hydrogen ions, and this acidity is the result of aluminium compounds hydrolysis [48]. A. ponderosa fruiting bodies from the different sampling sites showed a high range of aluminium content with a medium value of  mg/Kg dw. High aluminium levels were reported for some Amanita species, for example, A. rubescens that showed values around 262 mg/kg dw [15] and A. strobiliformis and A. verna presented aluminium levels of 72 and 343 mg/kg dw, respectively [5]. Other studies report different levels of aluminium in Amanita rubescens: 293, 75, and 512 mg/kg dw for the whole fruiting body, cap, and stipe, respectively [37]. The large range in aluminium content was also reported in a study of A. fulva that showed aluminium levels ranging from 40 to 500 mg/Kg dw in the stipe and 40 to 200 mg/Kg dw in cap [10]. Regarding cadmium and lead, these elements have the highest toxicological significance. Cadmium has probably been the most damaging metal found in mushrooms; some studies point out the existence of accumulating species, which, in polluted areas, accumulate this metal. The mean values of cadmium and lead were  mg/kg dw and  mg/kg dw, respectively, showing that the A. ponderosa had no toxicity due to the presence of these two elements [5, 11]. The contents of heavy metals barium and silver in the studied mushrooms were  mg/kg dw and  mg/kg dw, respectively. These values are similar to those described in the literature for other species of edible mushrooms [11] and lower than those described for species of the genus Amanita [5, 13].

Bioconcentration factor (BCF) allows estimating the mushroom potential for the bioextraction of elements from the substratum (soil). Values of BCF of A. ponderosa fruiting bodies are summarized in Tables 7 and 8. The macroelements, K and Na, exhibited the highest values of BCF but Ca, Mg, and P also presented BCF > 1. Trace elements, Ag, Cd, Cu, and Zn, presented BCF > 1 with higher values for Cu. The remaining elements (Fe, Mn, Ba, Cr, and Pb) are bioexcluded showing lower values (BCF < 1). For copper, BCF values ranged from 9 to 248, showing bioaccumulation of this metal. The same heterogeneous behaviour is observed for Ag, Cd, and Zn with values ranging from 1–72, 1–38, to 2–25, respectively. Ag bioaccumulation was found in other Amanita species with much higher values of BCF [13]. The high levels of aluminium observed for some A. ponderosa fruiting bodies can be related to soil content and to their different ability to accumulate this mineral, with BCF > 1 for some stands. Some works with different species such as Leccinum scabrum, Amanita rubescens, and Xerocomus chrysenteron reported different aluminium accumulation [15]. Some species of Basidiomycetes can be useful for assessing the environmental pollution levels [38].

Metal concentrations were usually assumed to be species-dependent, but soil composition is also an important factor in mineral content [12, 36, 38, 49]. In order to clarify this association between inorganic composition of A. ponderosa mushrooms and soil, a data mining approach was developed.

3.2. Segmentation Models Based on Mushrooms and Soil Mineral Content: Interpretation and Assessment

The k-Means Clustering Method is a segmentation algorithm that uses unsupervised learning. The input variables used in the segmentation approach are macroelements content (Na, K, Ca, P, and Mg), trace elements content (Al, Fe, Cu, Zn, Cr, and Mn), and heavy metals (Ag, Ba, Cd, and Pb). The algorithm input parameter is the number of clusters, 3 in this study. Table 9 shows the clusters centre of gravity, in order to characterize the clusters formed.

The analysis of Table 9 shows that cluster 1 is characterized by high values of Ag, Ba, Cd, K, Mg, and P. Cluster 2 is characterized by high content of Cr, Fe, Mn, Na, Pb, and Zn and Cluster 3 showed lower mineral content. In order to evaluate the relationships between clusters and fruiting bodies sampling sites the graph presented Figure 4 was conceived.

The analysis of Figure 4 shows that cluster 1 is formed by the samples collected at Almendres (1), Baleizão (3), Cabeça Gorda (5), Évoramonte (8), Mina S. Domingos (11), Montejuntos (14), N. Guadalupe (15), N. Machede (16), Rosal de la Frontera (17), Serpa (20), and Villanueva del Fresno (24). Cluster 2 includes the samples collected at Beja (2), Évora (7), S. Miguel de Machede (19), and V. N. S. Bento (23). Finally, cluster 3 is composed by the samples collected at Azaruja (2), da Mitra (9), Mértola (10), da Borralha (12), Novo (13), Aleixo da Restauração (18), de Rocins (21), and Valverde (22).

In order to generate an explanatory model of segmentation (i.e., seek to establish rules for assigning a new case to a cluster), Decisions Trees (DT) were used. Two different strategies were followed: one of them based on the mineral mushrooms content (strategy 1) and the other one based on the soil mineral composition (strategy 2).

To ensure statistical significance of the attained results, 25 (twenty-five) runs were applied in all tests, the accuracy estimates being achieved using the Holdout method [50]. In each simulation, the available data are randomly divided into two mutually exclusive partitions: the training set, with about 2/3 of the available data and used during the modelling phase, and the test set, with the remaining examples, being used after training, in order to compute the accuracy values.

The DT obtained using the strategy 1 is shown in Figure 5. The minerals that contribute to this explanatory model are Fe, Zn, and Ba and the rules to assign a case to a cluster are as follows:(i) If Fe ≤ 118.76 mg/Kg and Zn > 51.454 mg/Kg   and Ba > 0.523 mg/Kg    Then → Cluster 1(ii) If Fe > 118.76 mg/Kg   Then → Cluster 2 (iii) If Fe ≤ 118.76 mg/Kg   and Zn ≤ 51.454 mg/Kg     Then → Cluster 3(iv) If Fe ≤ 118.76 mg/Kg   and Zn > 51.454 mg/Kg     and Ba ≤ 0.523 mg/Kg      Then → Cluster 3

A common tool for classification analysis is the coincidence matrix [51], a matrix of size , where denotes the number of possible classes. This matrix is created by matching the predicted and actual values. was set to 3 (three) in the present case. Table 10 presents the coincidence matrix. The results reveal that the model accuracy is 100% both in the training set and in test set.

In order to relate the mineral mushrooms content to the soil mineral composition an explanatory model of the clusters formed was made, using the soil content of the same minerals (i.e., Fe, Zn, and Ba). Since the model accuracy is only 74% a new explanation model was built up. In this attempt all inorganic soil mineral content was available. The referred model is shown in Figure 6 and the respective coincidence matrix is presented in Table 11.

The model accuracy was 89.1% and 82.6%, respectively, for training and test sets. The soil minerals that contribute to this explanatory model are Cr, Ba, and Zn. The rules to assign the cases to each cluster are as follows:(i) If Cr (soil) > 3.765 mg/Kg Then → Cluster 1(ii) If Cr (soil) ≤ 3.765 mg/Kg and Ba (soil) ≤ 3.012 mg/Kg   and Zn (soil) ≤ 5.944 mg/Kg    Then → Cluster 1(iii) If Cr (soil) ≤ 3.765 mg/Kg and Ba (soil) > 3.012 mg/Kg   and Zn (soil) > 5.033 mg/Kg    Then → Cluster 2(iv) If Cr (soil) ≤ 3.765 mg/Kg and Ba (soil) ≤ 3.012 mg/Kg     and Zn (soil) > 5.944 mg/Kg    Then → Cluster 3(v) If Cr (soil) ≤ 3.765 mg/Kg and Ba (soil) > 3.012 mg/Kg   and Zn (soil) ≤ 5.033 mg/Kg    Then → Cluster 3

This study observed that the mineral content was influenced by the location area in which the mushroom samples were collected, possibly due to the soil composition and by environmental factors, such as medium temperature, vegetation, and rainfall. Indeed the inorganic composition of A. ponderosa allows group mushrooms according to the location area, based mainly in their Fe, Zn, and Ba content. On the other hand, it is possible to predict the same mushroom clustering taking into account the mineral soil content, based in Cr, Ba, and Zn soil composition although with a lower model accuracy.

Results of mineral composition do not reveal a direct correlation between inorganic composition of A. ponderosa mushrooms and their corresponding soil substrate; nevertheless, mushrooms are agents that play an important role in the continuous changes that occur in their habitats, and indeed they present a very effective mechanism for accumulating metals from the environment.

Moreno-Rojas et al. (2004), in the study of mineral content evaluation of A. ponderosa samples from Andalusia, also verified that variations occurred in the mineral composition according to the sample collection site, particularly in relation to Fe, K, and Na contents. Other authors also report that the main cause of variation of mineral composition between samples of different species of Amanita is the character and composition of the substrates (e.g., sand and wood) and may be influenced by the presence or absence of ability of the different species for a specific accumulation of some metals, namely, copper and zinc [5]. In a study carried out with a species of Boletaceae (Suillus grevillei), it is also mentioned that the variations in mineral composition of the different samples are related to the composition of the substrates and the geochemistry of the soils of each site [11].

4. Conclusions

A. ponderosa mushrooms collected from different sites showed fruiting bodies with water content of 90–93%, dry mass ranging from 6.9 to 9.7%, contents of organic matter between 6.2 and 9.0%, and minerals between 0.5 and 0.9%. Mineral composition revealed high content in macroelements, such as potassium, phosphorus, and magnesium. Copper, chromium, iron, manganese, and zinc, essential microelements in biological systems, can also be found in fruiting bodies of A. ponderosa, within the limits of RDI. Bioconcentration was observed for some macro- and microelements, such as K, Na, Cu, Zn, Mg, P, Ag, Ca, and Cd. The presence of heavy metals, such as barium, cadmium, lead and silver, was quite low, within the limits of RDI, and did not constitute a risk to human health.

Our results pointed out that it is possible to generate an explanatory model of segmentation performed with data based on the inorganic composition of mushrooms and soil mineral content, showing that it may be possible to relate these two types of data. The inorganic analysis provides evidence that mushrooms mineral composition variation is according to the collecting location, indicating the influence of the substrate characteristics in the fruiting bodies. The relationship between mineral elements in mushrooms and soils from the different sampling sites can be an important contribution to the certification process and seem to be related to the substrate effects from interindividual or interstrain differences.

Conflicts of Interest

The authors declare that they have no conflicts of interest.

Acknowledgments

The authors would like to acknowledge the HIT3CH Project-HERCULES Interface for Technology Transfer and Teaming in Cultural Heritage (ALT20-03-0246-FEDER-000004), MEDUSA Project-Microorganisms Monitoring and Mitigation-Developing and Unlocking Novel Sustainable Approaches (ALT20-03-0145-FEDER-000015), cofinanced by the European Regional Development Fund (ERDF), and ALENTEJO 2020 (Alentejo Regional Operational Programme).