Table of Contents Author Guidelines Submit a Manuscript
International Journal of Aerospace Engineering
Volume 2011, Article ID 154798, 14 pages
http://dx.doi.org/10.1155/2011/154798
Research Article

Reengineering Aircraft Structural Life Prediction Using a Digital Twin

1Structural Sciences Center, Air Vehicles Directorate, U.S. Air Force Research Laboratory, Wright-Patterson Air Force Base, Dayton, OH 45433, USA
2School of Civil and Environmental Engineering, Cornell University, Ithaca, NY 14853, USA

Received 25 April 2011; Accepted 2 August 2011

Academic Editor: Nicholas Bellinger

Copyright © 2011 Eric J. Tuegel et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [110 citations]

The following is the list of published articles that have cited the current article.

  • C. Kan, and C. J. Anumba, “Robotics, Automation, and Control,” Computing in Civil Engineering 2019, pp. 256–264, . View at Publisher · View at Google Scholar
  • Rafael Radkowski, David Wehr, Elizabeth Gregory, Stephen D. Holland, Rafael Radkowski, David Wehr, Elizabeth Gregory, and Stephen D. Holland, “Object motion tracking in the NDE laboratory by random sample iterative closest point,” vol. 1706, pp. 100011, . View at Publisher · View at Google Scholar
  • Dilworth Y. Parkinson, Keith Beattie, Xian Chen, Joaquin Correa, Eli Dart, Benedikt J. Daurer, Jack R. Deslippe, Alexander Hexemer, Harinarayan Krishnan, Alastair A. MacDowell, Filipe R. N. C. Maia, Stefano Marchesini, Howard A. Padmore, Simon J. Patton, Talita Perciano, James A. Sethian, David Shapiro, Rune Stromsness, Nobumichi Tamura, Brian L. Tierney, Craig E. Tull, and Daniela Ushizima, “Real-time data-intensive computing,” vol. 1741, pp. 050001, . View at Publisher · View at Google Scholar
  • Zheng Liu, Norbert Meyendorf, and Nezih Mrad, “The role of data fusion in predictive maintenance using digital twin,” vol. 1949, pp. 020023, . View at Publisher · View at Google Scholar
  • Jack Reid, Cynthia Zeng, and Danielle Wood, “Combining Social, Environmental and Design Models to Support the Sustainable Development Goals,” 2019 IEEE Aerospace Conference, pp. 1–13, . View at Publisher · View at Google Scholar
  • Daniela Ushizima, Talita Perciano, and Dilworth Parkinson, “Fast detection of material deformation through structural dissimilarity,” 2015 IEEE International Conference on Big Data (Big Data), pp. 2775–2781, . View at Publisher · View at Google Scholar
  • Constantin Wagner, Julian Grothoff, Ulrich Epple, Rainer Drath, Somayeh Malakuti, Sten Gruner, Michael Hoffmeister, and Patrick Zimermann, “The role of the Industry 4.0 asset administration shell and the digital twin during the life cycle of a plant,” 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), pp. 1–8, . View at Publisher · View at Google Scholar
  • Thomas Gabor, Lenz Belzner, Marie Kiermeier, Michael Till Beck, and Alexander Neitz, “A Simulation-Based Architecture for Smart Cyber-Physical Systems,” 2016 IEEE International Conference on Autonomic Computing (ICAC), pp. 374–379, . View at Publisher · View at Google Scholar
  • Elizabeth D. Gregory, Stephen D. Holland, Elizabeth D. Gregory, and Stephen D. Holland, “State Tracking of Composite Delaminations with a Bayesian Filter,” 2015 IEEE 14th International Conference on Machine Learning and Applications (ICMLA), pp. 600–603, . View at Publisher · View at Google Scholar
  • Andrea Barni, Alessandro Fontana, Silvia Menato, Marzio Sorlini, and Luca Canetta, “Exploiting the Digital Twin in the Assessment and Optimization of Sustainability Performances,” 2018 International Conference on Intelligent Systems (IS), pp. 706–713, . View at Publisher · View at Google Scholar
  • Xiao Fei, Qian Fengchen, Su Bing, and Fan Yuzhu, “Digital Twin of Solid Rocket Motor, Problem and Challenge,” 2018 11th International Symposium on Computational Intelligence and Design (ISCID), pp. 7–11, . View at Publisher · View at Google Scholar
  • Jack Sleuters, Yonghui Li, Jacques Verriet, Marina Velikova, and Richard Doornbos, “A Digital Twin Method for Automated Behavior Analysis of Large-Scale Distributed IoT Systems,” 2019 14th Annual Conference System of Systems Engineering (SoSE), pp. 7–12, . View at Publisher · View at Google Scholar
  • Yuan He, Chunya Liu, Yao Luo, Songzhen Yang, Chengkun Jiang, Xiuzhen Guo, Zihao Yu, Junchen Guo, Long Liu, Haozhen Liu, Xinpeng Zhang, Qilong Zhao, Xiaolong Zheng, Meng Jin, and Ting Wang, “IoT for the Power Industry,” Proceedings of the 16th ACM Conference on Embedded Networked Sensor Systems - SenSys '18, pp. 353–354, . View at Publisher · View at Google Scholar
  • Edward Oughton, “Building a Digital Twin: Testing the Effectiveness of Telecommunication Policies in a Virtual World,” SSRN Electronic Journal, . View at Publisher · View at Google Scholar
  • William Whitacre, and Michael Czabaj, “Automated 3D Digital Reconstruction of Fiber Reinforced Polymer Composites,” AIAA Guidance, Navigation, and Control Conference, . View at Publisher · View at Google Scholar
  • Andrew J. Zakrajsek, and Shankar Mall, “The Development and use of a Digital Twin Model for Tire Touchdown Health Monitoring,” 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, . View at Publisher · View at Google Scholar
  • You Ling, Isaac Asher, Liping Wang, Felipe Viana, and Genghis Khan, “Information gain-based inspection scheduling for fatigued aircraft components,” 19th AIAA Non-Deterministic Approaches Conference, . View at Publisher · View at Google Scholar
  • Chenzhao Li, Sankaran Mahadevan, You Ling, Liping Wang, and Sergio Choze, “A dynamic Bayesian network approach for digital twin,” 19th AIAA Non-Deterministic Approaches Conference, . View at Publisher · View at Google Scholar
  • Hee Yong Jeon, Cedric Justin, and Dimitri N. Mavris, “Improving Prediction Capability of Quadcopter Through Digital Twin,” AIAA Scitech 2019 Forum, . View at Publisher · View at Google Scholar
  • S. K. Jha, C. J. Szczepanski, M. J. Caton, R. John, A. H. Rosenberger, D. J. Buchanan, P. J. Golden, and J. R. Jira, “Reducing uncertainty in fatigue life limits of turbine engine alloys,” International Journal of Fatigue, vol. 57, pp. 103–112, 2013. View at Publisher · View at Google Scholar
  • Michael W. Czabaj, Mark L. Riccio, and William W. Whitacre, “Numerical reconstruction of graphite/epoxy composite microstructure based on sub-micron resolution X-ray computed tomography,” Composites Science and Technology, 2014. View at Publisher · View at Google Scholar
  • Albert Cerrone, Jacob Hochhalter, Gerd Heber, and Anthony Ingraffea, “On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin,” International Journal of Aerospace Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • C. D. Taylor, “Corrosion informatics: an integrated approach to modelling corrosion,” Corrosion Engineering Science And Technology, vol. 50, no. 7, pp. 490–508, 2015. View at Publisher · View at Google Scholar
  • Brent Bielefeldt, Jacob Hochhalter, and Darren Hartl, “Computationally efficient analysis of SMA sensory particles embedded in complex aerostructures using a substructure approach,” ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015, vol. 1, 2015. View at Publisher · View at Google Scholar
  • Jose Rios, Juan Carlos Hernandez, Manuel Oliva, Fernando Mas, Jose Rios, Juan Carlos Hernandez, Manuel Oliva, and Fernando Mas, “Product Avatar as Digital Counterpart of a Physical Individual Product: Literature Review and Implications in an Aircraft,” Transdisciplinary Lifecycle Analysis Of Systems, vol. 2, pp. 657–666, 2015. View at Publisher · View at Google Scholar
  • Michael Grieves, and John Vickers, “Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems,” Transdisciplinary Perspectives on Complex Systems, pp. 85–113, 2016. View at Publisher · View at Google Scholar
  • Trenton M. Ricks, Thomas E. LacyJr, Evan J. Pineda, Brett A. Bednarcyk, and Steven M. Arnold, “Computationally Efficient High-Fidelity Generalized Method of Cells Micromechanics Via Order-Reduction Techniques,” Composite Structures, 2016. View at Publisher · View at Google Scholar
  • R. Wiebe, and S.M. Spottswood, “On the dimension of complex responses in nonlinear structural vibrations,” Journal of Sound and Vibration, 2016. View at Publisher · View at Google Scholar
  • Xiao Wang, Lingxi Li, Yong Yuan, Peijun Ye, and Fei-Yue Wang, “ACP-based social computing and parallel intelligence: Societies 5.0 and beyond,” CAAI Transactions on Intelligence Technology, 2016. View at Publisher · View at Google Scholar
  • Joseph D. Schoneman, and Matthew S. Allen, “Investigating nonlinear modal energy transfer in a random load environment,” Conference Proceedings of the Society for Experimental Mechanics Series, vol. 1, pp. 141–153, 2016. View at Publisher · View at Google Scholar
  • José Ríos, Fernando Mas Morate, Manuel Oliva, and Juan Carlos Hernández, “Framework to support the aircraft digital counterpart concept with an industrial design view,” International Journal of Agile Systems and Management, vol. 9, no. 3, pp. 212–231, 2016. View at Publisher · View at Google Scholar
  • Steve D. Holland, and Elizabeth D. Gregory, “Tracking composite material damage evolution using Bayesian filtering and flash thermography data,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 9861, 2016. View at Publisher · View at Google Scholar
  • Alp Ustundag, Emre Cevikcan, Alperen Bal, and Sule I. Satoglu, “Advances in Virtual Factory Research and Applications,” Industry 4.0: Managing The Digital Transformation, pp. 235–249, 2017. View at Publisher · View at Google Scholar
  • Alp Ustundag, Emre Cevikcan, Sule Satoglu, Alp Ustundag, Emre Cevikcan, and Mehmet Bulent Durmusoglu, “Lean Production Systems for Industry 4.0,” Industry 4.0: Managing The Digital Transformation, pp. 43–59, 2017. View at Publisher · View at Google Scholar
  • Qi Zhang, Xiaomei Zhang, Wenjun Xu, Aiming Liu, Zude Zhou, and Duc Truong Pham, “Modeling of Digital Twin Workshop Based on Perception Data,” Intelligent Robotics and Applications, vol. 10464, pp. 3–14, 2017. View at Publisher · View at Google Scholar
  • Brent R Bielefeldt, Jacob D Hochhalter, and Darren J Hartl, “Shape memory alloy sensory particles for damage detection: Experiments, analysis, and design studies,” Structural Health Monitoring: An International Journal, pp. 147592171772119, 2017. View at Publisher · View at Google Scholar
  • Detlef Gerhardpp. 89–110, 2017. View at Publisher · View at Google Scholar
  • Joseph D. Schoneman, Matthew S. Allen, and Robert J. Kuether, “Nonlinear Modal Substructuring of Panel and Stiffener Assemblies via Characteristic Constraint Modes,” Dynamics of Coupled Structures, Volume 4, pp. 307–326, 2017. View at Publisher · View at Google Scholar
  • Rikard Söderberg, Kristina Wärmefjord, Johan S. Carlson, and Lars Lindkvist, “Toward a Digital Twin for real-time geometry assurance in individualized production,” CIRP Annals - Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Cunbo Zhuang, Hui Xiong, Jianhua Liu, Xiaoyu Ding, Shaoli Liu, and Gang Weng, “Connotation, architecture and trends of product digital twin,” Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, vol. 23, no. 4, pp. 753–768, 2017. View at Publisher · View at Google Scholar
  • Fei Tao, Jiangfeng Cheng, Qinglin Qi, Meng Zhang, He Zhang, and Fangyuan Sui, “Digital twin-driven product design, manufacturing and service with big data,” The International Journal of Advanced Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Adam Hehr, Mark Norfolk, Justin Wenning, John Sheridan, Paul Leser, Patrick Leser, and John A. Newman, “Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing,” Jom, 2017. View at Publisher · View at Google Scholar
  • Meng Zhang, Jiangfeng Cheng, Fei Tao, and Qinglin Qi, “Digital twin workshop: a new paradigm for future workshop,” Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, vol. 23, no. 1, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Kristofer Bengtsson, Lars Lindkvist, Johan S. Carlson, Robert Bohlin, Jonas Hagmar, and Rikard Söderberg, “Data flow and communication framework supporting digital twin for geometry assurance,” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2, 2017. View at Publisher · View at Google Scholar
  • Matthias Klein, Nasser Jazdi, and Michael Weyrich, “A Concept of Semantic Description for e-Production Systems in Manufacturing,” Procedia CIRP, vol. 62, pp. 589–593, 2017. View at Publisher · View at Google Scholar
  • Timothy D. West, and Mark Blackburn, “Is Digital Thread/Digital Twin Affordable? A Systemic Assessment of the Cost of DoD’s Latest Manhattan Project,” Procedia Computer Science, vol. 114, pp. 47–56, 2017. View at Publisher · View at Google Scholar
  • Fei Tao, and Meng Zhang, “Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing,” IEEE Access, vol. 5, pp. 20418–20427, 2017. View at Publisher · View at Google Scholar
  • Hao Zhang, Qiang Liu, Xin Chen, Ding Zhang, and Jiewu Leng, “A Digital Twin-Based Approach for Designing and Multi-Objective Optimization of Hollow Glass Production Line,” IEEE Access, vol. 5, pp. 26901–26911, 2017. View at Publisher · View at Google Scholar
  • Christian Eitzinger, Sebastian Zambal, Michael Clarke, John Klintworth, and Pierre-Yves Mechin, “A digital twin for composite parts manufacturing : EEffects of defects analysis based on manufacturing data,” Proceedings - IEEE 16th International Conference on Industrial Informatics, INDIN 2018, pp. 803–808, 2018. View at Publisher · View at Google Scholar
  • Tamás Ruppert, Szilárd Jaskó, Tibor Holczinger, and János Abonyi, “Enabling Technologies for Operator 4.0: A Survey,” Applied Sciences, vol. 8, no. 9, pp. 1650, 2018. View at Publisher · View at Google Scholar
  • Xi Vincent Wang, and Lihui Wang, “Digital twin-based WEEE recycling, recovery and remanufacturing in the background of Industry 4.0,” International Journal of Production Research, pp. 1–11, 2018. View at Publisher · View at Google Scholar
  • Weichao Luo, Tianliang Hu, Chengrui Zhang, and Yongli Wei, “Digital twin for CNC machine tool: modeling and using strategy,” Journal of Ambient Intelligence and Humanized Computing, 2018. View at Publisher · View at Google Scholar
  • Jiapeng Guo, Ning Zhao, Lin Sun, and Saipeng Zhang, “Modular based flexible digital twin for factory design,” Journal of Ambient Intelligence and Humanized Computing, 2018. View at Publisher · View at Google Scholar
  • Jiewu Leng, Hao Zhang, Douxi Yan, Qiang Liu, Xin Chen, and Ding Zhang, “Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop,” Journal of Ambient Intelligence and Humanized Computing, 2018. View at Publisher · View at Google Scholar
  • Yu Zheng, Sen Yang, and Huanchong Cheng, “An application framework of digital twin and its case study,” Journal of Ambient Intelligence and Humanized Computing, 2018. View at Publisher · View at Google Scholar
  • Feiyan Guo, Fang Zou, Jianhua Liu, and Zhongqi Wang, “Working mode in aircraft manufacturing based on digital coordination model,” The International Journal of Advanced Manufacturing Technology, 2018. View at Publisher · View at Google Scholar
  • Rikard Söderberg, Kristina Wärmefjord, Julia Madrid, Samuel Lorin, Anders Forslund, and Lars Lindkvist, “An information and simulation framework for increased quality in welded components,” CIRP Annals, 2018. View at Publisher · View at Google Scholar
  • Meng Zhang, Ying Zuo, and Fei Tao, “Equipment energy consumption management in digital twin shop-floor: A framework and potential applications,” ICNSC 2018 - 15th IEEE International Conference on Networking, Sensing and Control, pp. 1–5, 2018. View at Publisher · View at Google Scholar
  • Qiang Liu, Hao Zhang, Jiewu Leng, and Xin Chen, “Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system,” International Journal of Production Research, pp. 1–17, 2018. View at Publisher · View at Google Scholar
  • James Cale, and Miles Brim, “Remote and dynamic assessment of reliability in electromechanical actuator systems,” 12th Annual IEEE International Systems Conference, SysCon 2018 - Proceedings, pp. 1–8, 2018. View at Publisher · View at Google Scholar
  • Ying Cheng, Yongping Zhang, Ping Ji, Wenjun Xu, Zude Zhou, and Fei Tao, “Cyber-physical integration for moving digital factories forward towards smart manufacturing: a survey,” The International Journal of Advanced Manufacturing Technology, 2018. View at Publisher · View at Google Scholar
  • Timothy D. West, and Mark Blackburn, “Demonstrated Benefits Of A Nascent Digital Twin,” Insight, vol. 21, no. 1, pp. 43–47, 2018. View at Publisher · View at Google Scholar
  • Robin Klostermeier, Steffi Haag, and Alexander Benlian, “Digitale Zwillinge – Eine explorative Fallstudie zur Untersuchung von Geschäftsmodellen,” HMD Praxis der Wirtschaftsinformatik, 2018. View at Publisher · View at Google Scholar
  • Sanjiv Sam Gambhir, T. Jessie Ge, Ophir Vermesh, and Ryan Spitler, “Toward achieving precision health,” Science Translational Medicine, vol. 10, no. 430, pp. eaao3612, 2018. View at Publisher · View at Google Scholar
  • Cunbo Zhuang, Jianhua Liu, and Hui Xiong, “Digital twin-based smart production management and control framework for the complex product assembly shop-floor,” The International Journal of Advanced Manufacturing Technology, 2018. View at Publisher · View at Google Scholar
  • Christophe Ley, and Stéphane P. A. Bordas, “What makes Data Science different? A discussion involving Statistics2.0 and Computational Sciences,” International Journal of Data Science and Analytics, 2018. View at Publisher · View at Google Scholar
  • Sebastian Haag, and Reiner Anderl, “Digital Twin – Proof of Concept,” Manufacturing Letters, 2018. View at Publisher · View at Google Scholar
  • Fei Tao, Fangyuan Sui, Ang Liu, Qinglin Qi, Meng Zhang, Boyang Song, Zirong Guo, Stephen C.-Y. Lu, and A. Y. C. Nee, “Digital twin-driven product design framework,” International Journal of Production Research, pp. 1–19, 2018. View at Publisher · View at Google Scholar
  • Gerardo Santillán Martínez, Seppo Sierla, Tommi Karhela, and Valeriy Vyatkin, “Automatic generation of a simulation-based digital twin of an industrial process plant,” Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, pp. 3084–3089, 2018. View at Publisher · View at Google Scholar
  • Jinjiang Wang, Lunkuan Ye, Robert X. Gao, Chen Li, and Laibin Zhang, “Digital Twin for rotating machinery fault diagnosis in smart manufacturing,” International Journal of Production Research, pp. 1–15, 2018. View at Publisher · View at Google Scholar
  • Davy Preuveneers, Wouter Joosen, and Elisabeth Ilie-Zudor, “Robust Digital Twin Compositions for Industry 4.0 Smart Manufacturing Systems,” Proceedings - IEEE International Enterprise Distributed Object Computing Workshop, EDOCW, vol. 2018-, pp. 69–78, 2018. View at Publisher · View at Google Scholar
  • Datong Liu, Yu Peng, Kai Guo, and Benkuan Wang, “Summary and perspective survey on digital twin technology,” Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument, vol. 39, no. 11, pp. 1–10, 2018. View at Publisher · View at Google Scholar
  • Davis Meike, Florian Biesinger, Benedikt Kras, and Michael Weyrich, “A Case Study for a Digital Twin of Body-in-White Production Systems General Concept for Automated Updating of Planning Projects in the Digital Factory,” IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, vol. 2018-, pp. 19–26, 2018. View at Publisher · View at Google Scholar
  • Jinsong Bao, Dongsheng Guo, Jie Li, and Jie Zhang, “The modelling and operations for the digital twin in the context of manufacturing,” Enterprise Information Systems, pp. 1–23, 2018. View at Publisher · View at Google Scholar
  • Ke Yan, Wenjun Xu, Bitao Yao, Zude Zhou, and Duc Truong Pham, “Digital Twin-Based Energy Modeling of Industrial Robots,” Methods and Applications for Modeling and Simulation of Complex Systems, vol. 946, pp. 333–348, 2018. View at Publisher · View at Google Scholar
  • Cameron Sobie, Carina Freitas, and Mike Nicolai, “Simulation-driven machine learning: Bearing fault classification,” Mechanical Systems and Signal Processing, vol. 99, pp. 403–419, 2018. View at Publisher · View at Google Scholar
  • Fei Tao, Junqiang Wang, Hao Li, Jiangfeng Cheng, Qinglin Qi, Meng Zhang, He Zhang, Weiran Liu, Hui Cheng, Jianhua Liu, Qiang Liu, Ting Qu, Tianliang Hu, Wenjun Xu, Yingfeng Zhang, Zhenyu Liu, Fangyuan Sui, Lirong He, Wangmin Yi, Xiaojun Liu, Zhinan Zhang, and Feng Xiang, “Digital twin and its potential application exploration,” Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, vol. 24, no. 1, pp. 1–18, 2018. View at Publisher · View at Google Scholar
  • Dongming Zhao, Qinglin Qi, T. Warren Liao, and Fei Tao, “Modeling of cyber-physical systems and digital twin based on edge computing, fog computing and cloud computing towards smart manufacturing,” ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018, vol. 1, 2018. View at Publisher · View at Google Scholar
  • Detzner, and Eigner, “A digital twin for root cause analysis and product quality monitoring,” Proceedings of International Design Conference, DESIGN, vol. 4, pp. 1547–1558, 2018. View at Publisher · View at Google Scholar
  • Thiago Weber Martins, Reiner Anderl, and Lars Niemczik, “Concept of an automatic integration of parts measurement data into feature-based CAD models,” Proceedings of the ASME Design Engineering Technical Conference, vol. 1, 2018. View at Publisher · View at Google Scholar
  • William V. Mars, Jesse D. Suter, and Mark Bauman, “Computing Remaining Fatigue Life under Incrementally Updated Loading Histories,” SAE Technical Papers, vol. 2018-, 2018. View at Publisher · View at Google Scholar
  • Ville Toivonen, Minna Lanz, Hasse Nylund, and Harri Nieminen, “The FMS Training Center - a versatile learning environment for engineering education,” Procedia Manufacturing, vol. 23, pp. 135–140, 2018. View at Publisher · View at Google Scholar
  • Mika Lohtander, Niko Ahonen, Minna Lanz, Juho Ratava, and Jarno Kaakkunen, “Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin,” Procedia Manufacturing, vol. 25, pp. 55–61, 2018. View at Publisher · View at Google Scholar
  • Mika Lohtander, Elodie Garcia, Minna Lanz, Jarno Volotinen, Juho Ratava, and Jarno Kaakkunen, “Micro Manufacturing Unit – Creating Digital Twin Objects with Common Engineering Software,” Procedia Manufacturing, vol. 17, pp. 468–475, 2018. View at Publisher · View at Google Scholar
  • Rok Vrabič, John Ahmet Erkoyuncu, Peter Butala, and Rajkumar Roy, “Digital twins: Understanding the added value of integrated models for through-life engineering services,” Procedia Manufacturing, vol. 16, pp. 139–146, 2018. View at Publisher · View at Google Scholar
  • Benjamin Schleich, Rikard Söderberg, Sandro Wartzack, and Kristina Wärmefjord, “Geometrical Variations Management 4.0: Towards next generation geometry assurance,” Procedia CIRP, vol. 75, pp. 3–10, 2018. View at Publisher · View at Google Scholar
  • Qinglin Qi, and Fei Tao, “Digital Twin and Big Data Towards Smart Manufacturing and Industry 4.0: 360 Degree Comparison,” IEEE Access, vol. 6, pp. 3585–3593, 2018. View at Publisher · View at Google Scholar
  • Richárd Beregi, Ádám Szaller, and Botond Kádár, “Synergy of multi-modelling for process control,” IFAC-PapersOnLine, vol. 51, no. 11, pp. 1023–1028, 2018. View at Publisher · View at Google Scholar
  • Fatih Kurt, Wilhelm Frederik Van Der Vegte, and Oguz Kerem Sengöz, “Simulations based on product-usage information from connected products to support redesign for improved performance: Exploration of practical application to domestic fridge-freezers,” Journal of Computing and Information Science in Engineering, vol. 19, no. 3, 2019. View at Publisher · View at Google Scholar
  • Claudio Mandolla, Antonio Messeni Petruzzelli, Gianluca Percoco, and Andrea Urbinati, “Building a digital twin for additive manufacturing through the exploitation of blockchain: A case analysis of the aircraft industry,” Computers in Industry, vol. 109, pp. 134–152, 2019. View at Publisher · View at Google Scholar
  • Juan Ocampo, Harry Millwater, Nathan Crosby, Beth Gamble, Christopher Hurst, Michael Reyer, Sohrob Mottaghi, and Marv Nuss, “An Ultrafast Crack Growth Lifing Model to Support Digital Twin, Virtual Testing, and Probabilistic Damage Tolerance Applications,” ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing, pp. 145–158, 2019. View at Publisher · View at Google Scholar
  • Javier Gomez-Escalonilla, Diego Garijo, Oscar Valencia, and Ismael Rivero, “Development of Efficient High-Fidelity Solutions for Virtual Fatigue Testing,” ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing, pp. 187–200, 2019. View at Publisher · View at Google Scholar
  • Ben Dixon, Madeleine Burchill, Ben Main, Thierry Stehlin, and Raphaël Rigoli, “Progress on the Pathway to a Virtual Fatigue Test,” ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing, pp. 816–830, 2019. View at Publisher · View at Google Scholar
  • Alexie Dingli, and Foaad Haddod, “Interacting with Intelligent Digital Twins,” Design, User Experience, and Usability. User Experience in Advanced Technological Environments, vol. 11584, pp. 3–15, 2019. View at Publisher · View at Google Scholar
  • D. J. Wagg, P. Gardner, R. J. Barthorpe, and K. Worden, “On Key Technologies for Realising Digital Twins for Structural Dynamics Applications,” Model Validation and Uncertainty Quantification, Volume 3, pp. 267–272, 2019. View at Publisher · View at Google Scholar
  • K. Worden, E. J. Cross, P. Gardner, R. J. Barthorpe, and D. J. Wagg, “On Digital Twins, Mirrors and Virtualisations,” Model Validation and Uncertainty Quantification, Volume 3, pp. 285–295, 2019. View at Publisher · View at Google Scholar
  • Qingfei Min, Yangguang Lu, Zhiyong Liu, Chao Su, and Bo Wang, “Machine Learning based Digital Twin Framework for Production Optimization in Petrochemical Industry,” International Journal of Information Management, 2019. View at Publisher · View at Google Scholar
  • Francesco Longo, Letizia Nicoletti, and Antonio Padovano, “Ubiquitous knowledge empowers the Smart Factory: The impacts of a Service-oriented Digital Twin on enterprises' performance,” Annual Reviews in Control, 2019. View at Publisher · View at Google Scholar
  • Eric J. Topol, “High-performance medicine: the convergence of human and artificial intelligence,” Nature Medicine, 2019. View at Publisher · View at Google Scholar
  • Gleb Radchenko, Ameer Alaasam, and Andrei Tchernykh, “Micro-workflows: Kafka and kepler fusion to support digital twins of industrial processes,” Proceedings - 11th IEEE/ACM International Conference on Utility and Cloud Computing Companion, UCC Companion 2018, pp. 83–88, 2019. View at Publisher · View at Google Scholar
  • Maria João Lopes, Duarte Almeida, and Francisco J. A. Cardoso, “A Practical Approach to Manufacturing Execution Systems at Bosch AvP,” Technological Developments in Industry 4.0 for Business Applications, pp. 224–244, 2019. View at Publisher · View at Google Scholar
  • Jinfeng Liu, Xiangmeng Du, Honggen Zhou, Xiaojun Liu, L ei Li, and Feng Feng, “A digital twin-based approach for dynamic clamping and positioning of the flexible tooling system,” Procedia CIRP, vol. 80, pp. 746–749, 2019. View at Publisher · View at Google Scholar
  • Gianfranco E. Modoni, Enrico G. Caldarola, Marco Sacco, and Walter Terkaj, “Synchronizing physical and digital factory: benefits and technical challenges,” Procedia CIRP, vol. 79, pp. 472–477, 2019. View at Publisher · View at Google Scholar
  • P. Aivaliotis, K. Georgoulias, Z. Arkouli, and S. Makris, “Methodology for enabling Digital Twin using advanced physics-based modelling in predictive maintenance,” Procedia CIRP, vol. 81, pp. 417–422, 2019. View at Publisher · View at Google Scholar
  • Zexuan Zhu, Chao Liu, and Xun Xu, “Visualisation of the Digital Twin data in manufacturing by using Augmented Reality,” Procedia CIRP, vol. 81, pp. 898–903, 2019. View at Publisher · View at Google Scholar
  • Yan Xu, Yanming Sun, Xiaolong Liu, and Yonghua Zheng, “A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning,” IEEE Access, vol. 7, pp. 19990–19999, 2019. View at Publisher · View at Google Scholar
  • Jiacheng Xie, Xuewen Wang, Zhaojian Yang, and Shangqing Hao, “Virtual monitoring method for hydraulic supports based on digital twin theory,” Mining Technology: Transactions of the Institute of Mining and Metallurgy, 2019. View at Publisher · View at Google Scholar
  • Abolfazl Rezaei Aderiani, Kristina Wärmefjord, Rikard Söderberg, and Lars Lindkvist, “Developing a selective assembly technique for sheet metal assemblies,” International Journal of Production Research, 2019. View at Publisher · View at Google Scholar
  • Fei Tao, Meng Zhang, and A.Y.C. Nee, “Background and Concept of Digital Twin,” Digital Twin Driven Smart Manufacturing, pp. 3–28, 2019. View at Publisher · View at Google Scholar
  • Fei Tao, Meng Zhang, and A.Y.C. Nee, “Applications of Digital Twin,” Digital Twin Driven Smart Manufacturing, pp. 29–62, 2019. View at Publisher · View at Google Scholar