Table of Contents Author Guidelines Submit a Manuscript
International Journal of Aerospace Engineering
Volume 2015 (2015), Article ID 823019, 10 pages
http://dx.doi.org/10.1155/2015/823019
Research Article

Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

1Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, Liaoning 116023, China
2Key Laboratory for Precision and Non-Traditional Machining of Ministry of Education, Dalian University of Technology, Dalian, Liaoning 116023, China

Received 5 May 2015; Revised 14 June 2015; Accepted 18 June 2015

Academic Editor: Christopher J. Damaren

Copyright © 2015 Bo You et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Bo You, Zhifeng Lou, Yi Luo, Yang Xu, and Xiaodong Wang, “Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force,” International Journal of Aerospace Engineering, vol. 2015, Article ID 823019, 10 pages, 2015. doi:10.1155/2015/823019