Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2017, Article ID 1386017, 5 pages
https://doi.org/10.1155/2017/1386017
Research Article

3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity

BioMediTech Institute and Faculty of Biomedical Sciences and Engineering, Tampere University of Technology, P.O. Box 692, 33101 Tampere, Finland

Correspondence should be addressed to Han He; if.tut@eh.nah

Received 7 April 2017; Accepted 15 May 2017; Published 5 June 2017

Academic Editor: Sanming Hu

Copyright © 2017 Han He et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Han He, Mitra Akbari, Lauri Sydänheimo, Leena Ukkonen, and Johanna Virkki, “3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity,” International Journal of Antennas and Propagation, vol. 2017, Article ID 1386017, 5 pages, 2017. https://doi.org/10.1155/2017/1386017.