International Journal of Antennas and Propagation / 2017 / Article / Tab 1

Research Article

3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity

Table 1

The used 3D-printing and curing parameters.


Material feed pressure16.9 Psi
Printing spacing125 microns
Printing angle
Inner diameter of tip125 microns
Number of printed layers1
Curing60°C, 30 minutes

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.