Material Selection and Fabrication Processes for Flexible Conformal Antennas

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Conductive metals</td><td class="align_center">Nanoparticle Ag, Au, Pt, Pd, …</td></tr><tr><td class="align_left">Conductive polymers</td><td class="align_center">PEDOT, carbon nanotubes (CNTs)</td></tr><tr><td class="align_left">Semiconductors</td><td class="align_center">P3HT, PQT, CNTs, …</td></tr><tr><td class="align_left">Resistors</td><td class="align_center">Carbon, metal oxide, …</td></tr><tr><td class="align_left">Dielectric</td><td class="align_center">Epoxy, acrylic, PMMA, polyamide, PTFE, …</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Compatible materials for aerosol jet printing [<a href="/journals/ijap/2018/9815631/#B43" target="_blank">43</a>].</div>

International Journal of Antennas and Propagation

tab1

Table 1

Table 1: Material Selection and Fabrication Processes for Flexible Conformal Antennas 