Table of Contents Author Guidelines Submit a Manuscript
International Journal of Antennas and Propagation
Volume 2019, Article ID 8171978, 7 pages
https://doi.org/10.1155/2019/8171978
Research Article

Experimental Verification of the Weibull Distribution in a Reverberation Chamber

1College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
2The 41st Institute of China Electronics Technology Group Corporation, Qingdao 266555, China

Correspondence should be addressed to Qian Xu; moc.liamxof@uxme

Received 24 May 2019; Revised 28 June 2019; Accepted 19 July 2019; Published 7 August 2019

Academic Editor: Mauro Parise

Copyright © 2019 Jianhua Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. IEC 61000-4-21, Electromagnetic Compatibility (EMC)—Part 4–21: Testing and Measurement Techniques—Reverberation Chamber Test Methods, IEC Standard, Geneva, Switzerland, 2011.
  2. D. A. Hill, Electromagnetic Fields in Cavities: Deterministic and Statistical Theories, Wiley-IEEE Press, Hoboken, NJ, USA, 2009.
  3. P. Besnier and B. Demoulin, Electromagnetic Reverberation Chambers, Wiley-ISTE, Hoboken, NJ, USA, 2011.
  4. X. Chen, Reverberation Chamber Characterizations for Passive and Active OTA Measurements, Department of Signals and Systems, Chalmers University of Technology, Göteborg, Sweden, 2010, Licentiate of Engineering thesis.
  5. X. Chen, “Experimental investigation and modeling of the throughput of a 2 × 2 closed-loop MIMO system in a reverberation chamber,” IEEE Transactions on Antennas and Propagation, vol. 62, no. 9, pp. 4832–4835, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. CTIA, “Test plane for wireless large-form-factor device over-the-air performance,” CTIA, Washington, DC, USA, 2017. View at Google Scholar
  7. C. F. Bunting, “Statistical characterization and the simulation of a reverberation chamber using finite-element techniques,” IEEE Transactions on Electromagnetic Compatibility, vol. 44, no. 1, pp. 214–221, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Orjubin, E. Richalot, S. Mengue, and O. Picon, “Statistical model of an undermoded reverberation chamber,” IEEE Transactions on Electromagnetic Compatibility, vol. 48, no. 1, pp. 248–251, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Lemoine, P. Besnier, and M. Drissi, “Investigation of reverberation chamber measurements through high-power goodness-of-fit tests,” IEEE Transactions on Electromagnetic Compatibility, vol. 49, no. 4, pp. 745–755, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Qu, G. Lu, J. Lin, Y. Wang, and Y. Guan, “An investigation of statistical distribution properties in reverberation chamber,” in Proceedings of the 2008 International Conference on Microwave and Millimeter Wave Technology, pp. 1435–1437, April 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. W. Xue, X. Chen, and A. Zhang, “Investigation of automotive testing in a reverberation chamber,” IET Microwaves, Antennas & Propagation, vol. 4, no. 12, 2010. View at Publisher · View at Google Scholar
  12. Q. Xu and Y. Huang, Anechoic and Reverberation Chambers: Theory, Design and Measurements, Wiley-IEEE, Hoboken, NJ, USA, 2019.