Table of Contents Author Guidelines Submit a Manuscript
International Journal of Biomaterials
Volume 2017 (2017), Article ID 6435076, 8 pages
https://doi.org/10.1155/2017/6435076
Research Article

Influence of Processing Conditions on the Mechanical Behavior and Morphology of Injection Molded Poly(lactic-co-glycolic acid) 85:15

1Biomechanical Engineering Laboratory (LEBm), University Hospital (HU), Federal University of Santa Catarina, 88040-900 Florianópolis, SC, Brazil
2Laboratory of Innovation on Additive Manufacturing and Molding (NIMMA), Federal University of Santa Catarina, 88040-900 Florianópolis, SC, Brazil
3GRANTE, Department of Mechanical Engineering, Federal University of Santa Catarina, 88040-900 Florianópolis, SC, Brazil

Correspondence should be addressed to Liliane Pimenta de Melo; moc.liamg@gne.enailil

Received 3 May 2017; Accepted 19 June 2017; Published 7 August 2017

Academic Editor: Jie Deng

Copyright © 2017 Liliane Pimenta de Melo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Liliane Pimenta de Melo, Gean Vitor Salmoria, Eduardo Alberto Fancello, and Carlos Rodrigo de Mello Roesler, “Influence of Processing Conditions on the Mechanical Behavior and Morphology of Injection Molded Poly(lactic-co-glycolic acid) 85:15,” International Journal of Biomaterials, vol. 2017, Article ID 6435076, 8 pages, 2017. doi:10.1155/2017/6435076