About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [900 citations: 101–200 of 879 articles]

Articles published in International Journal of Biomaterials have been cited 900 times. The following is a list of the 879 articles that have cited the articles published in International Journal of Biomaterials.

  • Liqun Ning, Yitong Xu, Xiongbiao Chen, and David J. Schreyer, “Influence of mechanical properties of alginate-based substrates on the performance of Schwann cells in culture,” Journal of Biomaterials Science, Polymer Edition, pp. 1–18, 2016. View at Publisher · View at Google Scholar
  • Didarul B. Bhuiyan, John C. Middleton, Rina Tannenbaum, and Timothy M. Wick, “Mechanical properties and osteogenic potential of hydroxyapatite-PLGA-collagen biomaterial for bone regeneration,” Journal of Biomaterials Science, Polymer Edition, pp. 1–16, 2016. View at Publisher · View at Google Scholar
  • Norzawani Jaffar, Toshiki Miyazaki, and Toshinari Maeda, “Biofilm formation of periodontal pathogens on hydroxyapatite surfaces: Implications for periodontium damage,” Journal of Biomedical Materials Research Part A, 2016. View at Publisher · View at Google Scholar
  • K. C. Nune, R. D. K. Misra, S. J. Li, Y. L. Hao, and W. Zhang, “The functional response of bioactive titania-modified three-dimensional Ti-6Al-4V mesh structure toward providing a favorable pathway for intercellular communication and osteoincorporation,” Journal of Biomedical Materials Research Part A, vol. 104, no. 10, pp. 2488–2501, 2016. View at Publisher · View at Google Scholar
  • Sharon L. Hyzy, Alice Cheng, David J. Cohen, Gustavo Yatzkaier, Alexander J. Whitehead, Ryan M. Clohessy, Rolando A. Gittens, Barbara D. Boyan, and Zvi Schwartz, “ Novel hydrophilic nanostructured microtexture on direct metal laser sintered Ti-6Al-4V surfaces enhances osteoblast response in vitro and osseointegration in a rabbit model ,” Journal of Biomedical Materials Research Part A, vol. 104, no. 8, pp. 2086–2098, 2016. View at Publisher · View at Google Scholar
  • Shiuli Pujari-Palmer, Michael Pujari-Palmer, and Marjam Karlsson Ott, “Reduced oxidative stress in primary human cells by antioxidant released from nanoporous alumina,” Journal Of Biomedical Materials Research Part B-Applied Biomaterials, vol. 104, no. 3, pp. 568–575, 2016. View at Publisher · View at Google Scholar
  • Xiujuan Li, Jing Feng, Ran Zhang, Jinda Wang, Tao Su, Zuhong Tian, Dong Han, Chuanxu Zhao, Miaomiao Fan, Congye Li, Bing Liu, Xuyang Feng, Yongzhan Nie, Kaichun Wu, Yundai Chen, Hongbing Deng, and Feng Cao, “Quaternized Chitosan/Alginate-Fe3O4 Magnetic Nanoparticles Enhance the Chemosensitization of Multidrug-Resistant Gastric Carcinoma by Regulating Cell ,” Journal Of Biomedical Nanotechnology, vol. 12, no. 5, pp. 948–961, 2016. View at Publisher · View at Google Scholar
  • Yi Deng, Yuhua Sun, Yanjie Bai, Xiang Gao, Huan Zhang, Anxiu Xu, Enyi Huang, Feng Deng, and Shicheng Wei, “In Vitro Biocompability/Osteogenesis and In Vivo Bone Formation Evalution of Peptide-Decorated Apatite Nanocomposites Assisted via Polydopamine,” Journal Of Biomedical Nanotechnology, vol. 12, no. 4, pp. 602–618, 2016. View at Publisher · View at Google Scholar
  • Vítor E. Santo, Marta F. Estrada, Sofia P. Rebelo, Sofia C. Abreu, Inês M. Silva, Catarina Pinto, Susana C. Veloso, Ana Teresa Serra, Erwin Boghaert, Paula M. Alves, and Catarina Brito, “Adaptable stirred-tank culture strategies for large scale production of multicellular spheroid-based tumor cell models,” Journal of Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Laurie R. Goodrich, Albert C. Chen, Natasha M. Werpy, Ashley A. Williams, John D. Kisiday, Alvin W. Su, Esther Cory, Paul S. Morley, C. Wayne McIlwraith, Robert L. Sah, and Constance R. Chu, “Addition of Mesenchymal Stem Cells to Autologous Platelet-Enhanced Fibrin Scaffolds in Chondral Defects Does It Enhance Repair?,” Journal Of Bone And Joint Surgery-American Volume, vol. 98A, no. 1, pp. 23–34, 2016. View at Publisher · View at Google Scholar
  • Amy L. Strong, Danielle K. Bennett, Elizabeth B. Spreen, Dhaval V. Adhvaryu, Jeffrey C. Littleton, and Ernest J. Mencer, “Fetal Bovine Collagen Matrix in the Treatment of a Full Thickness Burn Wound,” Journal of Burn Care & Research, vol. 37, no. 3, pp. e292–e297, 2016. View at Publisher · View at Google Scholar
  • Hinojal Zazo, Clara I. Colino, and José M. Lanao, “Current Applications of Nanoparticles in Infectious Diseases,” Journal of Controlled Release, 2016. View at Publisher · View at Google Scholar
  • Martin Baumers, Chris Tuck, Ricky Wildman, Ian Ashcroft, and Richard Hague, “Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?,” Journal of Industrial Ecology, 2016. View at Publisher · View at Google Scholar
  • Marios Theodoridis, Dimitrios Dionysopoulos, Eugenia Koliniotou-Koumpia, Pavlos Dionysopoulos, and Paris Gerasimou, “Effect of preheating and shade on surface microhardness of silorane-based composites,” Journal of Investigative and Clinical Dentistry, 2016. View at Publisher · View at Google Scholar
  • Fuping Li, Jinshan Li, Hongchao Kou, and Lian Zhou, “Anisotropic Porous Ti6Al4V Alloys Fabricated by Diffusion Bonding: Adaption of Compressive Behavior to Cortical Bone Implant Applications,” Journal of Materials Science & Technology, 2016. View at Publisher · View at Google Scholar
  • Sabrina Royer, Mariana Henriques, Nayara Caroline Camilo, Maria Olívia Pereira, Rosineide Marques Ribas, Margarida Martins, Karinne Spirandelli Carvalho Naves, Rosário Oliveira, Paola Amaral de Campos, Cláudia Botelho, Bruna Fuga Araújo, Deivid William da Fonseca Batistão, and Paulo Pinto Gontijo-Filho, “Biofilm formation of Brazilian meticillin-resistant Staphylococcus aureus strains: prevalence of biofilm determinants and clonal profiles,” Journal of Medical Microbiology, vol. 65, no. 4, pp. 286–297, 2016. View at Publisher · View at Google Scholar
  • Yongjia Xin, Mark W. Bligh, Andrew S. Kinsela, and T. David Waite, “Effect of iron on membrane fouling by alginate in the absence and presence of calcium,” Journal Of Membrane Science, vol. 497, pp. 289–299, 2016. View at Publisher · View at Google Scholar
  • Ana Guadalupe Luque-Alcaraz, Mario Onofre Cortez-Rocha, Carlos Arturo Velázquez-Contreras, Ana Lilian Acosta-Silva, Hisila del Carmen Santacruz-Ortega, Armando Burgos-Hernández, Waldo Manuel Argüelles-Monal, and Maribel Plascencia-Jatomea, “ Enhanced Antifungal Effect of Chitosan/Pepper Tree ( Schinus molle ) Essential Oil Bionanocomposites on the Viability of Aspergillus parasiticus Spores ,” Journal of Nanomaterials, vol. 2016, pp. 1–10, 2016. View at Publisher · View at Google Scholar
  • Ui-Lyong Lee, Jae-Sung Kwon, Su-Heon Woo, and Young-Jun Choi, “Simultaneous Bimaxillary Surgery and Mandibular Reconstruction With a 3-Dimensional Printed Titanium Implant Fabricated by Electron Beam Melting: A Preliminary Mechanical Testing of the Printed Mandible,” Journal of Oral and Maxillofacial Surgery, 2016. View at Publisher · View at Google Scholar
  • Felicia Suska, Göran Kjeller, Peter Tarnow, Eduard Hryha, Lars Nyborg, Anders Snis, and Anders Palmquist, “Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report,” Journal of Oral and Maxillofacial Surgery, 2016. View at Publisher · View at Google Scholar
  • G. Quercia, D. Chan, and K. Luke, “Weibull statistics applied to tensile testing for oil well cement compositions,” Journal of Petroleum Science and Engineering, 2016. View at Publisher · View at Google Scholar
  • Ita Junkar, Mukta Kulkarni, Barbara Drašler, Neža Rugelj, Nina Recek, Damjana Drobne, Janez Kovač, Petr Humpolicek, Aleš Iglič, and Miran Mozetič, “ Enhanced biocompatibility of TiO 2 surfaces by highly reactive plasma ,” Journal of Physics D: Applied Physics, vol. 49, no. 24, pp. 244002, 2016. View at Publisher · View at Google Scholar
  • I M Zougrou, M Katsikini, F Pinakidou, M Brzhezinskaya, L Papadopoulou, E Vlachos, E Tsoukala, and E C Paloura, “Characterization of fossil remains using XRF, XPS and XAFS spectroscopies,” Journal of Physics: Conference Series, vol. 712, pp. 012090, 2016. View at Publisher · View at Google Scholar
  • S. Ismail, A. S. Ahmed, Reddy Anr, and S. Hamdan, “Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell,” Journal of Renewable Energy, vol. 2016, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • E. Takematsu, K. Cho, J. Hieda, M. Nakai, K. Katsumata, K. Okada, M. Niinomi, and N. Matsushita, “Adhesive strength of bioactive oxide layers fabricated on TNTZ alloy by three different alkali-solution treatments,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • T. Schouman, M. Schmitt, C. Adam, G. Dubois, and P. Rouch, “Influence of the overall stiffness of a load-bearing porous titanium implant on bone ingrowth in critical-size mandibular bone defects in sheep,” Journal Of The Mechanical Behavior Of Biomedical Materials, vol. 59, pp. 484–496, 2016. View at Publisher · View at Google Scholar
  • Valéria Maria de Oliveira Cardoso, Beatriz Stringhetti Ferreira Cury, Raul Cesar Evangelista, and Maria Palmira Daflon Gremião, “Development and characterization of cross-linked gellan gum and retrograded starch blend hydrogels for drug delivery applications,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • Widyasri Prananingrum, Yoritoki Tomotake, Yoshihito Naito, Jiyoung Bae, Kazumitsu Sekine, Kenichi Hamada, and Tetsuo Ichikawa, “Application of porous titanium in prosthesis production using a moldless process: Evaluation of physical and mechanical properties with various particle sizes, shapes, and mixing ratios,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • Bradley Lahens, Rodrigo Neiva, Nick Tovar, Adham M. Alifarag, Ryo Jimbo, Estevam A. Bonfante, Michelle M. Bowers, Marla Cuppini, Helora Freitas, Lukasz Witek, and Paulo G. Coelho, “Biomechanical and Histologic Basis of Osseodensification Drilling For Endosteal Implant Placement in Low Density Bone. An Experimental Study in Sheep,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • A. Vladescu, S.C. Padmanabhan, F. Ak Azem, M. Braic, I. Titorencu, I. Birlik, M.A. Morris, and V. Braic, “Mechanical properties and biocompatibility of the sputtered Ti doped hydroxyapatite,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • Joshua Tam, Ying Wang, Linh N. Vuong, Jeremy M. Fisher, William A. Farinelli, and R. Rox Anderson, “Reconstitution of full-thickness skin by microcolumn grafting,” Journal of Tissue Engineering and Regenerative Medicine, 2016. View at Publisher · View at Google Scholar
  • Mehrnaz Namiri, Mohammad Kazemi Ashtiani, Omid Mashinchian, Mohammad Mahdi Hasani-Sadrabadi, Morteza Mahmoudi, Nasser Aghdami, and Hossein Baharvand, “Engineering natural heart valves: possibilities and challenges,” Journal of Tissue Engineering and Regenerative Medicine, 2016. View at Publisher · View at Google Scholar
  • Ahmad Oryan, Esmat Alemzadeh, and Ali Moshiri, “Biological Properties and Therapeutic Activities of Honey in Wound Healing: A narrative review and meta-analysis,” Journal of Tissue Viability, 2016. View at Publisher · View at Google Scholar
  • Sai Sateesh Sagiri, Uvanesh Kasiviswanathan, Gauri Shankar Shaw, Meenakshi Singh, Arfat Anis, and Kunal Pal, “Effect of sorbitan monostearate concentration on the thermal, mechanical and drug release properties of oleogels,” Korean Journal Of Chemical Engineering, vol. 33, no. 5, pp. 1720–1727, 2016. View at Publisher · View at Google Scholar
  • Yun-Jeong Oh, Soohwang Seok, Sang-Hyeok Lee, Kwang-Mahn Kim, Jae-Sung Kwon, and Bum-Soon Lim, “Evaluation of Physical Properties of Titanium Specimen Fabricated by 3D Printing Technique,” Korean Journal of Dental Materials, vol. 43, no. 1, pp. 29–42, 2016. View at Publisher · View at Google Scholar
  • Giles Kirby, Lisa White, Roland Steck, Arne Berner, Kristofor Bogoevski, Omar Qutachi, Brendan Jones, Siamak Saifzadeh, Dietmar Hutmacher, Kevin Shakesheff, and Maria Woodruff, “Microparticles for Sustained Growth Factor Delivery in the Regeneration of Critically-Sized Segmental Tibial Bone Defects,” Materials, vol. 9, no. 4, pp. 259, 2016. View at Publisher · View at Google Scholar
  • Christian Pfeifer, Arne Berner, Matthias Koch, Werner Krutsch, Richard Kujat, Peter Angele, Michael Nerlich, and Johannes Zellner, “Higher Ratios of Hyaluronic Acid Enhance Chondrogenic Differentiation of Human MSCs in a Hyaluronic Acid–Gelatin Composite Scaffold,” Materials, vol. 9, no. 5, pp. 381, 2016. View at Publisher · View at Google Scholar
  • Mahdi Dehestani, Erik Adolfsson, and Lia A. Stanciu, “Mechanical properties and corrosion behavior of powder metallurgy iron-hydroxyapatite composites for biodegradable implant applications,” Materials & Design, vol. 109, pp. 556–569, 2016. View at Publisher · View at Google Scholar
  • N. Vanderesse, I. Ky, F. Quevedo González, N. Nuño, and P. Bocher, “Image analysis characterization of periodic porous materials produced by additive manufacturing,” Materials & Design, vol. 92, pp. 767–778, 2016. View at Publisher · View at Google Scholar
  • Volker Weißmann, Rainer Bader, Harald Hansmann, and Nico Laufer, “Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds,” Materials & Design, 2016. View at Publisher · View at Google Scholar
  • Clémence Petit, Eric Maire, Sylvain Meille, Jérôme Adrien, Shingo Kurosu, and Akihiko Chiba, “CoCrMo cellular structures made by Electron Beam Melting studied by local tomography and finite element modelling,” Materials Characterization, 2016. View at Publisher · View at Google Scholar
  • Jaroslav Čapek, Květa Stehlíková, Alena Michalcová, Šárka Msallamová, and Dalibor Vojtěch, “Microstructure, mechanical and corrosion properties of biodegradable powder metallurgical Fe-2 wt% X (X = Pd, Ag and C) alloys,” Materials Chemistry and Physics, 2016. View at Publisher · View at Google Scholar
  • Dmitry Zaytsev, and Peter Panfilov, “The strength properties of human dentinoenamel junction,” Materials Letters, vol. 178, pp. 107–110, 2016. View at Publisher · View at Google Scholar
  • P U Kadakia, E Jain, K R Hixon, C T Eberlin, and S A Sell, “Sonication induced silk fibroin cryogels for tissue engineering applications,” Materials Research Express, vol. 3, no. 5, pp. 055401, 2016. View at Publisher · View at Google Scholar
  • Dimitrios Dionysopoulos, Kosmas Tolidis, and Paris Gerasimou, “The Effect of Composition, Temperature and Post-Irradiation Curing of Bulk Fill Resin Composites on Polymerization Efficiency,” Materials Research-Ibero-American Journal Of Materials, vol. 19, no. 2, pp. 466–473, 2016. View at Publisher · View at Google Scholar
  • Elham Sadat Jamadi, Laleh Ghasemi-Mobarakeh, Mohammad Morshed, Morteza Sadeghi, Molamma P. Prabhakaran, and Seeram Ramakrishna, “Synthesis of polyester urethane urea and fabrication of elastomeric nanofibrous scaffolds for myocardial regeneration,” Materials Science & Engineering C-Materials For Biological Applications, vol. 63, pp. 106–116, 2016. View at Publisher · View at Google Scholar
  • Yan Liu, Guofeng Jiang, and Guo He, “Enhancement of entangled porous titanium by BisGMA for load-bearing biomedical applications,” Materials Science & Engineering C-Materials For Biological Applications, vol. 61, pp. 37–41, 2016. View at Publisher · View at Google Scholar
  • Lauris Rupeks, Viktor Filipenkov, Ivars Knets, Visvaldis Vitins, Marina Sokolova, Liga Stipniece, and Mara Pilmane, “Mechanical Properties and Biocompatibility of a Biomaterial Based on Deproteinized Hydroxyapatite and Endodentine Cement,” Materials Science and Applied Chemistry, vol. 33, no. 1, 2016. View at Publisher · View at Google Scholar
  • Yingmin Su, Satoshi Komasa, Tohru Sekino, Hiroshi Nishizaki, and Joji Okazaki, “Nanostructured Ti6Al4V alloy fabricated using modified alkali-heat treatment: Characterization and cell adhesion,” Materials Science and Engineering: C, vol. 59, pp. 617–623, 2016. View at Publisher · View at Google Scholar
  • Sandipan Roy, Niloy Khutia, Debdulal Das, Mitun Das, Vamsi Krishna Balla, Amit Bandyopadhyay, and Amit Roy Chowdhury, “Understanding compressive deformation behavior of porous Ti using finite element analysis,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Ian Richard Cooper, Mauro Pollini, and Federica Paladini, “The potential of photo-deposited silver coatings on Foley catheters to prevent urinary tract infections,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Chhavi Sharma, Amit Kumar Dinda, Pravin D. Potdar, Chia-Fu Chou, and Narayan Chandra Mishra, “Fabrication and characterization of novel nano-biocomposite scaffold of chitosan–gelatin–alginate–hydroxyapatite for bone tissue engineering,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Faranak Mohammadkazemi, Marisa Faria, and Nereida Cordeiro, “In situ biosynthesis of bacterial nanocellulose-CaCO3 hybrid bionanocomposite: One-step process,” Materials Science and Engineering: C, vol. 65, pp. 393–399, 2016. View at Publisher · View at Google Scholar
  • Farnaz Ghorbani, Hanieh Nojehdehian, and Ali Zamanian, “Physicochemical and mechanical properties of freeze casted hydroxyapatite-gelatin scaffolds with dexamethasone loaded PLGA microspheres for hard tissue engineering applications,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Hossein E. Jazayeri, Mohammadreza Tahriri, Mehdi Razavi, Kimia Khoshroo, Farahnaz Fahimipour, Erfan Dashtimoghadam, Luis Almeida, and Lobat Tayebi, “A current overview of materials and strategies for potential use in maxillofacial tissue regeneration,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Divya Arora, Vandna Dhanwal, Debasis Nayak, Ankit Saneja, Hina Amin, Reyaz ur Rasool, Prem Narayan Gupta, and Anindya Goswami, “Preparation, characterization and toxicological investigation of copper loaded chitosan nanoparticles in human embryonic kidney HEK-293 cells,” Materials Science and Engineering: C, vol. 61, pp. 227–234, 2016. View at Publisher · View at Google Scholar
  • Min-Ho Kang, Tae-Sik Jang, Sung Won Kim, Hui-Sun Park, Juha Song, Hyoun-Ee Kim, Kyung-Hwan Jung, and Hyun-Do Jung, “MgF2-coated porous magnesium/alumina scaffolds with improved strength, corrosion resistance, and biological performance for biomedical applications,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Emily A. Growney Kalaf, Reynaldo Flores, J. Gary Bledsoe, and Scott A. Sell, “Characterization of slow-gelling alginate hydrogels for intervertebral disc tissue-engineering applications,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Erika S. Ogawa, Adaias O. Matos, Thamara Beline, Isabella S.V. Marques, Cortino Sukotjo, Mathew T. Mathew, Elidiane C. Rangel, Nilson C. Cruz, Marcelo F. Mesquita, Rafael X. Consani, and Valentim A.R. Barão, “Surface-treated commercially pure titanium for biomedical applications: Electrochemical, structural, mechanical and chemical characterizations,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Feven Mattews Michael, Mohammad Khalid, Rashmi Walvekar, Chantara Thevy Ratnam, Suganti Ramarad, Humaira Siddiqui, and M.D. Enamul Hoque, “Effect of nanofillers on the physico-mechanical properties of load bearing bone implants,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Claudia Bergemann, Matthias Cornelsen, Antje Quade, Thorsten Laube, Matthias Schnabelrauch, Henrike Rebl, Volker Weißmann, Hermann Seitz, and Barbara Nebe, “Continuous cellularization of calcium phosphate hybrid scaffolds induced by plasma polymer activation,” Materials Science and Engineering: C, vol. 59, pp. 514–523, 2016. View at Publisher · View at Google Scholar
  • Mohammad Mehrasa, Mohammad Ali Asadollahi, Bijan Nasri-Nasrabadi, Kamran Ghaedi, Hossein Salehi, Alireza Dolatshahi-Pirouz, and Ayyoob Arpanaei, “Incorporation of mesoporous silica nanoparticles into random electrospun PLGA and PLGA/gelatin nanofibrous scaffolds enhances mechanical and cell proliferation properties,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Purna Sai Korrapati, K. Karthikeyan, Aishwarya Satish, Venkat Raghavan Krishnaswamy, Jayarama Reddy Venugopal, and Seeram Ramakrishna, “Recent advancements in nanotechnological strategies in selection, design and delivery of biomolecules for skin regeneration,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Eneko Larrañeta, Rebecca E.M. Lutton, A. David Woolfson, and Ryan F. Donnelly, “Microneedle arrays as transdermal and intradermal drug delivery systems: Materials science, manufacture and commercial development,” Materials Science and Engineering: R: Reports, vol. 104, pp. 1–32, 2016. View at Publisher · View at Google Scholar
  • Fernanda Abbate dos Santos, Gisele C. V. Iulianelli, and Maria Inês Bruno Tavares, “The Use of Cellulose Nanofillers in Obtaining Polymer Nanocomposites: Properties, Processing, and Applications,” Materials Sciences and Applications, vol. 07, no. 05, pp. 257–294, 2016. View at Publisher · View at Google Scholar
  • S. Zhao, S. J. Li, W. T. Hou, Y. L. Hao, R. Yang, and L. E. Murr, “Microstructure and mechanical properties of open cellular Ti-6Al-4V prototypes fabricated by electron beam melting for biomedical applications,” Materials Technology, vol. 31, no. 2, pp. 98–107, 2016. View at Publisher · View at Google Scholar
  • Massimiliano Merola, Alessandro Ruggiero, Jonathan Salvatore De Mattia, and Saverio Affatato, “On the tribological behavior of retrieved hip femoral heads affected by metallic debris. A comparative investigation by stylus and optical profilometer for a new roughness measurement protocol,” Measurement, 2016. View at Publisher · View at Google Scholar
  • Shariq Qayyum, and Asad U. Khan, “Nanoparticles vs. biofilms: a battle against another paradigm of antibiotic resistance,” Med. Chem. Commun., 2016. View at Publisher · View at Google Scholar
  • Ashfaq Mohammad, Abdulrahman Alahmari, Khaja Moiduddin, Muneer Mohammed, Abdulrahman Alomar, and Ravi Renganayagalu, “Porous γ-TiAl Structures Fabricated by Electron Beam Melting Process,” Metals, vol. 6, no. 1, pp. 25, 2016. View at Publisher · View at Google Scholar
  • Zhen Lu, Zhenhan Huang, Shaosong Jiang, Wei Liu, and Kaifeng Zhang, “Influencing Factors for the Microstructure and Mechanical Properties of Micro Porous Titanium Manufactured by Metal Injection Molding,” Metals, vol. 6, no. 4, pp. 83, 2016. View at Publisher · View at Google Scholar
  • Volker Weißmann, Jan Wieding, Harald Hansmann, Nico Laufer, Andreas Wolf, and Rainer Bader, “Specific Yielding of Selective Laser-Melted Ti6Al4V Open-Porous Scaffolds as a Function of Unit Cell Design and Dimensions,” Metals, vol. 6, no. 7, pp. 166, 2016. View at Publisher · View at Google Scholar
  • Janette Brezinová, Radovan Hudák, Anna Guzanová, Dagmar Draganovská, Gabriela Ižaríková, and Juraj Koncz, “Direct Metal Laser Sintering of Ti6Al4V for Biomedical Applications: Microstructure, Corrosion Properties, and Mechanical Treatment of Implants,” Metals, vol. 6, no. 7, pp. 171, 2016. View at Publisher · View at Google Scholar
  • Axel Deing, Thomas Ebel, Regine Willumeit-Römer, and Bérengère Luthringer, “Comparison of the Influence of Phospholipid-Coated Porous Ti-6Al-4V Material on the Osteosarcoma Cell Line Saos-2 and Primary Human Bone Derived Cells,” Metals, vol. 6, no. 3, pp. 66, 2016. View at Publisher · View at Google Scholar
  • Patricia Brassolatti, Paulo Sérgio Bossini, Maria Carolina Derêncio Oliveira, Hueliton Wilian Kido, Carla Roberta Tim, Luciana Almeida-Lopes, Lucimar Retto Da Silva De Avó, Fernando M. Araújo-Moreira, and Nivaldo Antonio Parizotto, “Comparative effects of two different doses of low-level laser therapy on wound healing third-degree burns in rats,” Microscopy Research and Technique, vol. 79, no. 4, pp. 313–320, 2016. View at Publisher · View at Google Scholar
  • Ching-Wen Liu, Yu-Tse Wu, Kai-Jen Lin, Tsan-Jung Yu, Yu-Liang Kuo, and Li-Ching Chang, “A Hydrogel-Based Epirubicin Delivery System for Intravesical Chemotherapy,” Molecules, vol. 21, no. 6, pp. 712, 2016. View at Publisher · View at Google Scholar
  • Gudepalya Rudramurthy, Mallappa Swamy, Uma Sinniah, and Ali Ghasemzadeh, “Nanoparticles: Alternatives Against Drug-Resistant Pathogenic Microbes,” Molecules, vol. 21, no. 7, pp. 836, 2016. View at Publisher · View at Google Scholar
  • Manila Chieruzzi, Stefano Pagano, Silvia Moretti, Roberto Pinna, Egle Milia, Luigi Torre, and Stefano Eramo, “Nanomaterials for Tissue Engineering In Dentistry,” Nanomaterials, vol. 6, no. 7, pp. 134, 2016. View at Publisher · View at Google Scholar
  • Thanh Xuan Nguyen, Lin Huang, Mario Gauthier, Guang Yang, and Qun Wang, “Recent advances in liposome surface modification for oral drug delivery,” Nanomedicine, 2016. View at Publisher · View at Google Scholar
  • Yaowalak Srisuwan, Yodthong Baimark, and Prasong Srihanam, “Preparation of Regenerated Silk Sericin/Silk Fibroin Blend Microparticles by Emulsification-Diffusion Method for Controlled Release Drug Delivery,” Particulate Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Esmaeil Darabpour, Nasim Kashef, and Shohreh Mashayekhan, “Chitosan nanoparticles enhance the efficiency of methylene blue-mediated antimicrobial photodynamic inactivation of bacterial biofilms: An in vitro study,” Photodiagnosis and Photodynamic Therapy, vol. 14, pp. 211–217, 2016. View at Publisher · View at Google Scholar
  • Morgane Laurent, Julia Koehler, Gad Sabbatier, Corinne A. Hoesli, Nicolas Gherardi, and Gaétan Laroche, “Atmospheric Pressure Plasma Polymer of Ethyl Lactate: In Vitro Degradation and Cell Viability Studies,” Plasma Processes and Polymers, 2016. View at Publisher · View at Google Scholar
  • Stefano Benazzi, Huynh Nhu Nguyen, Ottmar Kullmer, and Kornelius Kupczik, “Dynamic Modelling of Tooth Deformation Using Occlusal Kinematics and Finite Element Analysis,” Plos One, vol. 11, no. 3, 2016. View at Publisher · View at Google Scholar
  • Nina Recek, Gregor Primc, Alenka Vesel, Miran Mozetic, José Avila, Ivy Razado-Colambo, and Maria Asensio, “Degradation of Albumin on Plasma-Treated Polystyrene by Soft X-ray Exposure,” Polymers, vol. 8, no. 7, pp. 244, 2016. View at Publisher · View at Google Scholar
  • Ralph Jeuken, Alex Roth, Ruud Peters, Corrinus van Donkelaar, Jens Thies, Lodewijk van Rhijn, and Pieter Emans, “Polymers in Cartilage Defect Repair of the Knee: Current Status and Future Prospects,” Polymers, vol. 8, no. 6, pp. 219, 2016. View at Publisher · View at Google Scholar
  • Lluís Palou, Asgar Ali, Elazar Fallik, and Gianfranco Romanazzi, “GRAS, plant- and animal-derived compounds as alternatives to conventional fungicides for the control of postharvest diseases of fresh horticultural produce,” Postharvest Biology and Technology, 2016. View at Publisher · View at Google Scholar
  • Fanyi Liu, Bo Li, Lanhua Yi, Jian Zhang, and Jun Chen, “Effect of moisture content on some simulation parameters of wheat and soybean required in DEM,” Powder Technology, 2016. View at Publisher · View at Google Scholar
  • Gabriela Strnad, Nicolae Chirila, Cecilia Petrovan, and Octav Russu, “Contact Angle Measurement on Medical Implant Titanium Based Biomaterials,” Procedia Technology, vol. 22, pp. 946–953, 2016. View at Publisher · View at Google Scholar
  • Işıl G. Beşkardeş, Rebecca S. Hayden, Dean L. Glettig, David L. Kaplan, and Menemşe Gümüşderelioğlu, “Bone tissue engineering with scaffold-supported perfusion co-cultures of human stem cell-derived osteoblasts and cell line-derived osteoclasts,” Process Biochemistry, 2016. View at Publisher · View at Google Scholar
  • Hanuma Reddy Tiyyagura, Rebeka Rudolf, Selestina Gorgieva, Regina Fuchs-Godec, Venkatappa Rao Boyapati, Krishna Mohan Mantravadi, and Vanja Kokol, “The chitosan coating and processing effect on the physiological corrosion behaviour of porous magnesium monoliths,” Progress in Organic Coatings, vol. 99, pp. 147–156, 2016. View at Publisher · View at Google Scholar
  • Brittany L. Banik, Gregory S. Lewis, and Justin L. Brown, “Multiscale Poly-(ϵ-caprolactone) Scaffold Mimicking Non-linearity in Tendon Tissue Mechanics,” Regenerative Engineering and Translational Medicine, 2016. View at Publisher · View at Google Scholar
  • Lubna Sheikh, Sucheta Tripathy, and Suprabha Nayar, “Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery,” RSC Adv., vol. 6, no. 67, pp. 62556–62571, 2016. View at Publisher · View at Google Scholar
  • Ana M. Díez-Pascual, and Angel L. Díez-Vicente, “PEGylated boron nitride nanotube-reinforced poly(propylene fumarate) nanocomposite biomaterials,” RSC Adv., vol. 6, no. 83, pp. 79507–79519, 2016. View at Publisher · View at Google Scholar
  • Xiaoyan Song, Tao Li, Bowen Cheng, and Jinfeng Xing, “POSS–PU electrospinning nanofibers membrane with enhanced blood compatibility,” RSC Adv., vol. 6, no. 70, pp. 65756–65762, 2016. View at Publisher · View at Google Scholar
  • Tian-Xiao Han, Bei Chang, Xin Ding, Guang-Na Yue, Wen Song, Hui-Ping Tang, Liang Jia, Ling-Zhou Zhao, and Yu-Mei Zhang, “ Improved bone formation and ingrowth for additively manufactured porous Ti 6 Al 4 V bone implants with strontium laden nanotube array coating ,” RSC Adv., vol. 6, no. 17, pp. 13686–13697, 2016. View at Publisher · View at Google Scholar
  • He Zhang, Lyndon F. Cooper, Xiaonan Zhang, Yi Zhang, Feng Deng, Jinlin Song, and Sheng Yang, “Titanium nanotubes induce osteogenic differentiation through the FAK/RhoA/YAP cascade,” RSC Adv., vol. 6, no. 50, pp. 44062–44069, 2016. View at Publisher · View at Google Scholar
  • Li-Hua Zhang, Xiao-Peng Duan, Xu Yan, Miao Yu, Xin Ning, Yong Zhao, and Yun-Ze Long, “Recent advances in melt electrospinning,” RSC Adv., vol. 6, no. 58, pp. 53400–53414, 2016. View at Publisher · View at Google Scholar
  • Zhigang Zhu, Jianliang Zhou, Jingli Ding, Jianjun Xu, Haijun Zhong, and Shuijin Lei, “A novel approach to prepare a tissue engineering decellularized valve scaffold with poly(ethylene glycol)-poly(epsilon-caprolactone),” Rsc Advances, vol. 6, no. 17, pp. 14427–14438, 2016. View at Publisher · View at Google Scholar
  • Natalia A. Arkharova, Elena I. Suvorova, Alexander V. Severin, Albert K. Khripunov, Sergey V. Krasheninnikov, and Vera V. Klechkovskaya, “SEM and TEM for structure and properties characterization of bacterial cellulose/hydroxyapatite composites,” Scanning, 2016. View at Publisher · View at Google Scholar
  • Susan Christo, Akash Bachhuka, Kerrilyn R. Diener, Krasimir Vasilev, and John D. Hayball, “The contribution of inflammasome components on macrophage response to surface nanotopography and chemistry,” Scientific Reports, vol. 6, 2016. View at Publisher · View at Google Scholar
  • Mohammad Zulhasif Ahmad Khiri, Khamirul Amin Matori, Norhazlin Zainuddin, Che Azurahanim Che Abdullah, Zarifah Nadakkavil Alassan, Nur Fadilah Baharuddin, and Mohd Hafiz Mohd Zaid, “The usability of ark clam shell (Anadara granosa) as calcium precursor to produce hydroxyapatite nanoparticle via wet chemical precipitate method in various sintering temperature,” SpringerPlus, vol. 5, no. 1, 2016. View at Publisher · View at Google Scholar