Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2011, Article ID 385083, 10 pages
http://dx.doi.org/10.1155/2011/385083
Research Article

Development of Analytical Method for Predicting Residual Mechanical Properties of Corroded Steel Plates

1Department of Civil and Environmental Engineering, Ehime University, Matsuyama 790-8577, Japan
2Department of Civil Engineering and Architecture, Tokuyama College of Technology, Shunan 745-8585, Japan
3Department of Civil and Environmental Engineering, Hiroshima University, Higashi-Hiroshima 739-8511, Japan
4Department of Civil Engineering, University of Peradeniya, Peradeniya 20400, Sri Lanka

Received 22 September 2010; Revised 21 January 2011; Accepted 25 March 2011

Academic Editor: Chang-Jian Lin

Copyright © 2011 J. M. R. S. Appuhamy et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. NSBA, “Corrosion protection of steel bridges,” in Steel Bridge Design Handbook, chapter 23, National Steel Bridge Alliance, 2006. View at Google Scholar
  2. T. Kitada, “Considerations on recent trends in, and future prospects of, steel bridge construction in Japan,” Journal of Constructional Steel Research, vol. 62, no. 11, pp. 1192–1198, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Natori, K. Nishikawa, J. Murakoshi, and T. Ohno, “Study on characteristics of corrosion damages in steel bridge members,” Journal of Structural Mechanics and Earthquake Engineering, vol. 668, no. 54, pp. 299–311, 2001 (Japanese). View at Google Scholar
  4. I. Sugimoto, Y. Kobayashi, and A. Ichikawa, “Durability evaluation based on buckling characteristics of corroded steel deck girders,” Quarterly Report of RTRI, vol. 47, no. 3, pp. 150–155, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Kariya, K. Tagaya, T. Kaita, and K. Fujii, “Mechanical properties of corroded steel plate under tensile force,” in Proceedings of the 3rd International Structural Engineering and Construction Conference (ISEC '03), pp. 105–110, Shunan, Japan, 2003.
  6. M. Matsumoto, Y. Shirai, I. Nakamura, and N. Shiraishi, “A proposal of effective thickness estimation method of corroded steel member,” Bridge Foundation Engineering, vol. 23, no. 12, pp. 19–25, 1989 (Japanese). View at Google Scholar
  7. A. Muranaka, O. Minata, and K. Fujii, “Estimation of residual strength and surface irregularity of the corroded steel plates,” Journal of Structural Engineering, vol. 44A, pp. 1063–1071, 1998 (Japanese). View at Google Scholar
  8. A. Kariya, K. Tagaya, T. Kaita, and K. Fujii, “Basic study on effective thickness of corroded steel plate and material property,” in Proceedings of the Annual Conference of JSCE, pp. 967–968, 2003.
  9. T. Kaita, Y. Kawasaki, H. Isami, M. Ohga, and K. Fujii, “Analytical study on remaining compressive strength and ultimate behaviors for locally-corroded flanges,” in Proceedings of the East Asian Stock Exchange Conference (EASEC '08), Taipei, Taiwan, 2008.
  10. A. A. P. Sidharth, “Effect of pitting corrosion on ultimate strength and buckling strength of plates—a review,” Digest Journal of Nanomaterials and Biostructures, vol. 4, no. 4, pp. 783–788, 2009. View at Google Scholar
  11. M. M. Ahmmad and Y. Sumi, “Strength and deformability of corroded steel plates under quasi-static tensile load,” Journal of Marine Science and Technology, vol. 15, no. 1, pp. 1–15, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. J. K. Paik, J. M. Lee, and M. J. Ko, “Ultimate compressive strength of plate elements with pit corrosion wastage,” Journal of Engineering for the Maritime Environment, vol. 217, no. 4, pp. 185–200, 2003. View at Google Scholar
  13. J. K. Paik, J. M. Lee, and M. J. Ko, “Ultimate shear strength of plate elements with pit corrosion wastage,” Thin-Walled Structures, vol. 42, no. 8, pp. 1161–1176, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Ok, Y. Pu, and A. Incecik, “Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression,” Marine Structures, vol. 20, no. 1-2, pp. 100–114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. J. M. R. S. Appuhamy, M. Ohga, T. Kaita, and K. Fujii, “Effect of measuring points on remaining strength estimation of corroded steel plates,” in Proceedings of the 9th Pacific Structural Steel Conference (PSSC '10), pp. 1504–1516, Beijing, China, 2010.
  16. A. M. Kanvinde and G. G. Deierlein, “The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels,” Journal of Structural Engineering, vol. 132, no. 12, pp. 1907–1918, 2006. View at Publisher · View at Google Scholar · View at Scopus