Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2012, Article ID 543212, 8 pages
http://dx.doi.org/10.1155/2012/543212
Research Article

Stress-Corrosion Cracking Property of Aluminum-Magnesium Alloy Processed by Equal-Channel Angular Pressing

1Department of Materials Science & Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
2Department of Materials Process Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
3JFE Steel Corporation, Japan
4Department of Applied Chemistry and Biochemistry, Kyushu Sangyo University, 2-3-1 Matsukadai, Higashi-ku, Fukuoka 813-8503, Japan

Received 26 December 2011; Revised 19 January 2012; Accepted 19 January 2012

Academic Editor: Rokuro Nishimura

Copyright © 2012 Hiroaki Nakano et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Hiroaki Nakano, Satoshi Oue, Seiji Taguchi, Shigeo Kobayashi, and Zenji Horita, “Stress-Corrosion Cracking Property of Aluminum-Magnesium Alloy Processed by Equal-Channel Angular Pressing,” International Journal of Corrosion, vol. 2012, Article ID 543212, 8 pages, 2012. https://doi.org/10.1155/2012/543212.