Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2017, Article ID 1541267, 9 pages
https://doi.org/10.1155/2017/1541267
Research Article

The Effect of Graphene on the Protective Properties of Water-Based Epoxy Coatings on Al2024-T3

Department of Chemical Engineering, Materials and Industrial Production, University of Napoli Federico II, Piazzale Tecchio 80, 80125 Napoli, Italy

Correspondence should be addressed to T. Monetta; ti.aninu@attenom

Received 14 March 2017; Revised 21 April 2017; Accepted 3 May 2017; Published 25 May 2017

Academic Editor: Flavio Deflorian

Copyright © 2017 T. Monetta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Kumar, S. Raj, S. Jain, and K. Chatterjee, “Multifunctional biodegradable polymer nanocomposite incorporating graphene-silver hybrid for biomedical applications,” Materials & Design, vol. 108, pp. 319–332, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. R. B. Ladani, S. Wu, A. J. Kinloch et al., “Multifunctional properties of epoxy nanocomposites reinforced by aligned nanoscale carbon,” Materials & Design, vol. 94, pp. 554–564, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Wang, Y. Lan, W. Yu, X. Li, Y. Qian, and H. Liu, “Preparation of amino-functionalized graphene oxide/polyimide composite films with improved mechanical, thermal and hydrophobic properties,” Applied Surface Science, vol. 362, pp. 11–19, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Zhao, H. Chang, S. Chen, J. Cui, and Y. Yan, “High-performance and multifunctional epoxy composites filled with epoxide-functionalized graphene,” European Polymer Journal, vol. 84, pp. 300–312, 2016. View at Publisher · View at Google Scholar
  5. H. Kim, Y. Miura, and C. W. Macosko, “Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity,” Chemistry of Materials, vol. 22, no. 11, pp. 3441–3450, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. S. H. Song, K. H. Park, B. H. Kim et al., “Enhanced thermal conductivity of epoxy-graphene composites by using non-oxidized graphene flakes with non-covalent functionalization,” Advanced Materials, vol. 25, no. 5, pp. 732–737, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Tang, G. Hu, H. Gao, and L. Hai, “Application of graphene as filler to improve thermal transport property of epoxy resin for thermal interface materials,” International Journal of Heat and Mass Transfer, vol. 85, pp. 420–429, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Wang, J. Yu, W. Dai et al., “Enhanced thermal and electrical properties of epoxy composites reinforced with graphene nanoplatelets,” Polymer Composites, vol. 36, no. 3, pp. 556–565, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. A. S. Wajid, H. S. T. Ahmed, S. Das, F. Irin, A. F. Jankowski, and M. J. Green, “High-performance pristine graphene/epoxy composites with enhanced mechanical and electrical properties,” Macromolecular Materials and Engineering, vol. 298, no. 3, pp. 339–347, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Wang, L. T. Drzal, Y. Qin, and Z. Huang, “Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites,” Journal of Materials Science, vol. 50, no. 3, pp. 1082–1093, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Zhang, R. Asmatulu, S. A. Soltani, L. N. Le, and S. S. A. Kumar, “Mechanical and thermal properties of hierarchical composites enhanced by pristine graphene and graphene oxide nanoinclusions,” Journal of Applied Polymer Science, vol. 131, no. 19, Article ID 40826, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. K.-C. Chang, M.-H. Hsu, H.-I. Lu et al., “Room-temperature cured hydrophobic epoxy/graphene composites as corrosion inhibitor for cold-rolled steel,” Carbon, vol. 66, pp. 144–153, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. K.-C. Chang, W.-F. Ji, M.-C. Lai et al., “Synergistic effects of hydrophobicity and gas barrier properties on the anticorrosion property of PMMA nanocomposite coatings embedded with graphene nanosheets,” Polymer Chemistry, vol. 5, no. 3, pp. 1049–1056, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Liu, W. Zhao, S. Liu, Q. Cen, and Q. Xue, “Comparative tribological and corrosion resistance properties of epoxy composite coatings reinforced with functionalized fullerene C60 and graphene,” Surface and Coatings Technology, vol. 286, pp. 354–364, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Liu, L. Gu, H. Zhao, J. Chen, and H. Yu, “Corrosion resistance of graphene-reinforced waterborne epoxy coatings,” Journal of Materials Science & Technology, vol. 32, no. 5, pp. 425–431, 2016. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Rajabi, G. R. Rashed, and D. Zaarei, “Assessment of graphene oxide/epoxy nanocomposite as corrosion resistance coating on carbon steel,” Corrosion Engineering Science and Technology, vol. 50, no. 7, pp. 509–516, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. B. Ramezanzadeh, S. Niroumandrad, A. Ahmadi, M. Mahdavian, and M. H. M. Moghadam, “Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide,” Corrosion Science, vol. 103, pp. 283–304, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. B. Ramezanzadeh, A. Ahmadi, and M. Mahdavian, “Enhancement of the corrosion protection performance and cathodic delamination resistance of epoxy coating through treatment of steel substrate by a novel nanometric sol-gel based silane composite film filled with functionalized graphene oxide nanosheets,” Corrosion Science, vol. 109, pp. 182–205, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. Z. Yu, H. Di, Y. Ma et al., “Preparation of graphene oxide modified by titanium dioxide to enhance the anti-corrosion performance of epoxy coatings,” Surface and Coatings Technology, vol. 276, pp. 471–478, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. Yu, L. Lv, Y. Ma, H. Di, and Y. He, “Covalent modification of graphene oxide by metronidazole for reinforced anti-corrosion properties of epoxy coatings,” RSC Advances, vol. 6, no. 22, pp. 18217–18226, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. L. Gu, S. Liu, H. Zhao, and H. Yu, “Facile preparation of water-dispersible graphene sheets stabilized by carboxylated oligoanilines and their anticorrosion coatings,” ACS Applied Materials & Interfaces, vol. 7, no. 32, pp. 17641–17648, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. W. Xiao, Y. Liu, and S. Guo, “Composites of graphene oxide and epoxy resin assuming a uniform 3D graphene oxide network structure,” RSC Advances, vol. 6, no. 90, pp. 86904–86908, 2016. View at Publisher · View at Google Scholar
  23. N. Yousefi, X. Lin, Q. Zheng et al., “Simultaneous in situ reduction, self-alignment and covalent bonding in graphene oxide/epoxy composites,” Carbon, vol. 59, pp. 406–417, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Monetta, A. Acquesta, and F. Bellucci, “Graphene/epoxy coating as multifunctional material for aircraft structures,” Aerospace, vol. 2, no. 3, pp. 423–434, 2015. View at Publisher · View at Google Scholar
  25. “Council Directive 1999/13/EC of 11 March 1999 on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain activities and installations,” Official Journal of the European Union, no. L 085, pp. 0001–0022, 1999.
  26. F. Andreatta, M. Bortolotto, A. Lanzutti, L. Paussa, D. Bravin, and L. Fedrizzi, “Environmentally friendly conversion coating for aluminium alloy AA6014,” in Proceedings of 18th International Corrosion Congress, pp. 355–366, November 2011. View at Scopus
  27. F. Deflorian, S. Rossi, and M. Fedel, “Aluminium components for marine applications protected against corrosion by organic coating cycles with low environmental impact,” Corrosion Engineering Science and Technology, vol. 46, no. 3, pp. 237–244, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. C. Sinagra, F. Bravaccino, C. Bitondo et al., “Green Technology for Surface Treatments of Aluminium Foil for Flexible Packaging,” Key Engineering Materials, vol. 710, pp. 186–191, 2016. View at Publisher · View at Google Scholar
  29. C. Bitondo, A. Bossio, T. Monetta, M. Curioni, and F. Bellucci, “The effect of annealing on the corrosion behaviour of 444 stainless steel for drinking water applications,” Corrosion Science, vol. 87, pp. 6–10, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Carangelo, M. Curioni, A. Acquesta, T. Monetta, and F. Bellucci, “Cerium-based sealing of anodic films on AA2024T3: effect of pore morphology on anticorrosion performance,” Journal of the Electrochemical Society, vol. 163, no. 14, pp. C907–C916, 2016. View at Publisher · View at Google Scholar
  31. T. Monetta, A. Acquesta, V. Maresca et al., “Characterization of aluminum alloys environmentally friendly surface treatments for aircraft and aerospace industry,” Surface and Interface Analysis, vol. 45, no. 10, pp. 1522–1529, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Scala, A. Squillace, T. Monetta, D. B. Mittonb, D. Larsonb, and F. Belluccia, “Corrosion fatigue on 2024T3 and 6056T4 aluminum alloys,” Surface and Interface Analysis, vol. 42, no. 4, pp. 194–198, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Carneiro, J. Tedim, S. C. M. Fernandes et al., “Chitosan-based self-healing protective coatings doped with cerium nitrate for corrosion protection of aluminum alloy 2024,” Progress in Organic Coatings, vol. 75, no. 1-2, pp. 8–13, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. H. A. Fetouh, T. M. Abdel-Fattah, and M. S. El-Tantawy, “Novel plant extracts as green corrosion inhibitors for 7075-t6 aluminium alloy in an aqueous medium,” International Journal of Electrochemical Science, vol. 9, no. 3, pp. 1565–1582, 2014. View at Google Scholar · View at Scopus
  35. M. Gobara, H. Kamel, R. Akid, and A. Baraka, “Corrosion behaviour of AA2024 coated with an acid-soluble collagen/hybrid silica sol-gel matrix,” Progress in Organic Coatings, vol. 89, pp. 57–66, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. T. Monetta, D. B. Mitton, and F. Bellucci, “Protective properties of organic coatings on plasma-treated cold rolled aluminum,” Electrochemical and Solid-State Letters, vol. 7, no. 11, pp. B39–B41, 2004. View at Publisher · View at Google Scholar · View at Scopus
  37. L. De Rosa, T. Monetta, and F. Bellucci, “Moisture uptake in organic coatings monitored with EIS,” Materials Science Forum, vol. 289–292, no. 1, pp. 315–326, 1998. View at Publisher · View at Google Scholar · View at Scopus
  38. F. Mansfeld, “Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings,” Journal of Applied Electrochemistry, vol. 25, no. 3, pp. 187–202, 1995. View at Publisher · View at Google Scholar · View at Scopus
  39. F. Bellucci and L. Nicodemo, “Water transport in organic coatings,” Corrosion, vol. 49, no. 3, pp. 235–247, 1993. View at Publisher · View at Google Scholar · View at Scopus
  40. L. Nicodemo, F. Bellucci, A. Marcone, and T. Monetta, “Water and oxygen transport as performance parameters of paint films,” Journal of Membrane Science, vol. 52, no. 3, pp. 393–403, 1990. View at Publisher · View at Google Scholar · View at Scopus
  41. G. W. Walter, “A review of impedance plot methods used for corrosion performance analysis of painted metals,” Corrosion Science, vol. 26, no. 9, pp. 681–703, 1986. View at Publisher · View at Google Scholar · View at Scopus
  42. C. C. Ku and R. Liepins, Electrical Properties of Polymers: Chemical Principles, Hanser Publishers, 1987.
  43. Y. Su, V. G. Kravets, S. L. Wong, J. Waters, A. K. Geim, and R. R. Nair, “Impermeable barrier films and protective coatings based on reduced graphene oxide,” Nature Communications, vol. 5, article 4843, 2014. View at Publisher · View at Google Scholar
  44. B. M. Yoo, H. J. Shin, H. W. Yoon, and H. B. Park, “Graphene and graphene oxide and their uses in barrier polymers,” Journal of Applied Polymer Science, vol. 131, no. 1, Article ID 39628, 2014. View at Publisher · View at Google Scholar · View at Scopus