Table of Contents Author Guidelines Submit a Manuscript
International Journal of Corrosion
Volume 2018, Article ID 1604507, 7 pages
https://doi.org/10.1155/2018/1604507
Research Article

A Comparative Study of Hydrogen-Induced Cracking Resistances of API 5L B and X52MS Carbon Steels

School of Engineering, São Paulo State University (UNESP), Guaratinguetá, SP, Brazil

Correspondence should be addressed to Heloisa Andréa Acciari; rb.psenu.gef@asioleh

Received 8 January 2018; Revised 8 April 2018; Accepted 10 April 2018; Published 14 May 2018

Academic Editor: Ramana M. Pidaparti

Copyright © 2018 Rodrigo Monzon Figueredo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. IEA, Resources to Reserves 2013 - Oil, Gas and Coal Technologies for the Energy Markets of the Future, International Energy Agency, Paris, France.
  2. M. A. Mohtadi-Bonab, J. A. Szpunar, R. Basu, and M. Eskandari, “The mechanism of failure by hydrogen induced cracking in an acidic environment for API 5L X70 pipeline steel,” International Journal of Hydrogen Energy, vol. 40, no. 2, pp. 1096–1107, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. ISO, “Petroleum and Natural Gas Industries - Materials for use in H2S-Containing Environments in Oil and Gas Production - Part 1,” Tech. Rep. ISO 15156-1, International Organization for Standardization, Switzerland, 2009. View at Google Scholar
  4. D. Talbot, Corrosion Science and Technology, CRC Press, New York, NY, USA, 2007.
  5. B. P. Tissot and D. H. Welte, Petroleum Formation and Occurrence, Springer, Berlin, Germany, 2nd edition, 1984. View at Publisher · View at Google Scholar
  6. C. Zhou, S. Zheng, C. Chen, and G. Lu, “The effect of the partial pressure of H2S on the permeation of hydrogen in low carbon pipeline steel,” Corrosion Science, vol. 67, pp. 184–192, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Sojka, M. Jérôme, M. Sozańska, P. Váňová, L. Rytířová, and P. Jonšta, “Role of microstructure and testing conditions in sulphide stress cracking of X52 and X60 API steels,” Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, vol. 480, no. 1-2, pp. 237–243, 2008. View at Publisher · View at Google Scholar
  8. NACE International, “Evaluation of Pipeline and pressure vessel steel for resistance to hydrogen-induced crack,” Tech. Rep. ANSI/NACE TM0284, NACE International, Houston, Tex, USA, 2017. View at Google Scholar
  9. NACE International, “Standard test method laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environments,” Tech. Rep. ANSI/NACE TM0177, NACE International, Houston, Tex, USA, 2016. View at Google Scholar
  10. API 5L, “Specification for Line Pipe,” Tech. Rep., API Publishing Services, Washington, Wash, USA, 2012. View at Google Scholar
  11. K. Kobayashi, T. Omura, M. Okatsu, T. Hara, and N. Ishikawa, “Proposal of HIC test solution with buffer capacity in NACE TM0284,” in Proceedings of the NACE - International Corrosion Conference Series, Orlando, Fla, USA, 2013. View at Scopus
  12. F. Huang, J. Liu, Z. Deng, J. Cheng, Z. Lu, and X. Li, “Effect of microstructure and inclusions on hydrogen induced cracking susceptibility and hydrogen trapping efficiency of X120 pipeline steel,” Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, vol. 527, no. 26, pp. 6997–7001, 2010. View at Publisher · View at Google Scholar
  13. L. Gan, F. Huang, X. Zhao, J. Liu, and Y. F. Cheng, “Hydrogen trapping and hydrogen induced cracking of welded X100 pipeline steel in H2S environments,” International Journal of Hydrogen Energy, vol. 43, no. 4, pp. 2293–2306, 2018. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Elboujdaini and R. W. Revie, “Metallurgical factors in stress corrosion cracking (SCC) and hydrogen-induced cracking (HIC),” Journal of Solid State Electrochemistry, vol. 13, no. 7, pp. 1091–1099, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. A. C. Palmer and R. A. King, Subsea Pipeline Engineering, PennWell, Tulsa, Okla, USA, 2008, Subsea Pipeline Engineering.
  16. M. A. Mohtadi-Bonab and M. Eskandari, “A focus on different factors affecting hydrogen induced cracking in oil and natural gas pipeline steel,” Engineering Failure Analysis, vol. 79, pp. 351–360, 2017. View at Publisher · View at Google Scholar · View at Scopus
  17. P. Bai, S. Zheng, and C. Chen, “Electrochemical characteristics of the early corrosion stages of API X52 steel exposed to H2S environments,” Materials Chemistry and Physics, vol. 149, pp. 295–301, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Ning, Y. Zheng, B. Brown, D. Young, and S. Nesic, “Construction and verification of pourbaix diagrams for hydrogen sulfide corrosion of mild steel,” in Proceedings of the NACE - International Corrosion Conference Series, Dallas, Tex, USA, 2015.
  19. S. Zheng, C. Zhou, X. Chen, L. Zhang, J. Zheng, and Y. Zhao, “Dependence of the abnormal protective property on the corrosion product film formed on H2S-adjacent API-X52 pipeline steel,” International Journal of Hydrogen Energy, vol. 39, no. 25, pp. 13919–13925, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. C. Zhou, X. Chen, Z. Wang, S. Zheng, X. Li, and L. Zhang, “Effects of environmental conditions on hydrogen permeation of X52 pipeline steel exposed to high H2S-containing solutions,” Corrosion Science, vol. 89, no. C, pp. 30–37, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. S. N. Smith, B. Brown, and W. Sun, “Paper 11081 of NACE International,” in Proceedings of the Paper 11081 of NACE International, Houston, Tex, USA, 2011.
  22. B. Craig, “Corrosion product analysis - a road map to corrosion in oil and gas production,” Materials Performance, vol. 41, no. 8, pp. 56–58, 2002. View at Google Scholar · View at Scopus
  23. S. N. Smith, “Corrosion product analysis in oil and gas pipelines,” Materials Performance, vol. 42, no. 8, pp. 44–47, 2003. View at Google Scholar · View at Scopus