Influence of Hot-Dip Galvanised Coating Morphology on the Adhesion of Organic Coatings Depending on the Zinc Bath Pb Content and the Postgalvanising Cooling Method

<div>SEM micrographs of water-cooled sample surfaces: (a) Pb 1.2, (b) Pb 0.8, and (c) Pb 0.4.</div>

International Journal of Corrosion

fig3

Figure 3

Figure 3: Influence of Hot-Dip Galvanised Coating Morphology on the Adhesion of Organic Coatings Depending on the Zinc Bath Pb Content and the Postgalvanising Cooling Method 

Figure 3 | Influence of Hot-Dip Galvanised Coating Morphology on the Adhesion of Organic Coatings Depending on the Zinc Bath Pb Content and the Postgalvanising Cooling Method 