Research Article
Microstructure and Damping Capacity of ZK60 Alloy Sheets Fabricated by Twin Roll Casting and Hot Rolling Process
Table 1
The thickness evolution of the sheet during the rolling process.
| Redution ratio per pass | Thickness value after the following pass rolling (mm) | Original thickness | 1 | 4 | 8 | 11 | 15 | 20 | 25 |
| 10% | 3.5 | 3.4 | 2.64 | 1.92 | 1.54 | 1.14 | 0.83 | 0.65 | 30% | 3.5 | 3.14 | 1.31 | 0.84 | 0.65 | | | | 50% | 3.5 | 2.65 | 1.04 | 0.65 | | | | |
|
|