Table of Contents Author Guidelines Submit a Manuscript
International Journal of Dentistry
Volume 2016, Article ID 1239842, 15 pages
http://dx.doi.org/10.1155/2016/1239842
Review Article

3D-Printed Scaffolds and Biomaterials: Review of Alveolar Bone Augmentation and Periodontal Regeneration Applications

1Department of Biomedical, Surgical and Dental Sciences, Foundation IRCCS Ca’ Granda Polyclinic, University of Milan, Milan, Italy
2Department of Periodontics and Oral Medicine, School of Dentistry, University of Michigan, Ann Arbor, MI, USA
3Department of Biomedical Engineering, College of Engineering, University of Michigan, Ann Arbor, MI, USA

Received 12 February 2016; Revised 17 April 2016; Accepted 10 May 2016

Academic Editor: Saso Ivanovski

Copyright © 2016 Farah Asa’ad et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Javed, H. B. Ahmed, R. Crespi, and G. E. Romanos, “Role of primary stability for successful osseointegration of dental implants: factors of influence and evaluation,” Interventional Medicine and Applied Science, vol. 5, no. 4, pp. 162–167, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. B. S. McAllister and K. Haghighat, “Bone augmentation techniques,” Journal of Periodontology, vol. 78, no. 3, pp. 377–396, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. I. Rocchietta, F. Fontana, and M. Simion, “Clinical outcomes of vertical bone augmentation to enable dental implant placement: a systematic review,” Journal of Clinical Periodontology, vol. 35, supplement 8, pp. 203–215, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Esposito, M. G. Grusovin, P. Felice, G. Karatzopoulos, H. V. Worthington, and P. Coulthard, “Interventions for replacing missing teeth: horizontal and vertical bone augmentation techniques for dental implant treatment,” Cochrane Database of Systematic Reviews, vol. 4, Article ID CD003607, 2009. View at Google Scholar · View at Scopus
  5. S. S. Jensen and H. Terheyden, “Bone augmentation procedures in localized defects in the alveolar ridge: clinical results with different bone grafts and bone-substitute materials,” The International Journal of Oral & Maxillofacial Implants, vol. 24, supplement 1, pp. 218–236, 2009. View at Google Scholar · View at Scopus
  6. M. Esposito, G. Cannizarro, E. Soardi, G. Pellegrino, R. Pistilli, and P. Felice, “A 3-year post-loading report of a randomised controlled trial on the rehabilitation of posterior atrophic mandibles: short implants or longer implants in vertically augmented bone?” European Journal of Oral Implantology, vol. 4, no. 4, pp. 301–311, 2011. View at Google Scholar · View at Scopus
  7. G. Pellegrini, G. Pagni, and G. Rasperini, “Surgical approaches based on biological objectives: GTR versus GBR techniques,” International Journal of Dentistry, vol. 2013, Article ID 521547, 13 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Pagni, D. Kaigler, G. Rasperini, G. Avila-Ortiz, R. Bartel, and W. V. Giannobile, “Bone repair cells for craniofacial regeneration,” Advanced Drug Delivery Reviews, vol. 64, no. 12, pp. 1310–1319, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Oryan, S. Alidadi, A. Moshiri, and N. Maffulli, “Bone regenerative medicine: classic options, novel strategies, and future directions,” Journal of Orthopaedic Surgery and Research, vol. 9, no. 1, article 18, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. R. J. O'Keefe and J. Mao, “Bone tissue engineering and regeneration: from discovery to the clinic—an overview,” Tissue Engineering Part B: Reviews, vol. 17, no. 6, pp. 389–392, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. A. R. Amini, C. T. Laurencin, and S. P. Nukavarapu, “Bone tissue engineering: recent advances and challenges,” Critical Reviews in Biomedical Engineering, vol. 40, no. 5, pp. 363–408, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. J. P. Fisher and A. H. Reddi, “Functional tissue engineering of bone: signals and scaffolds,” in Topics in Tissue Engineering, N. Ashammakhi and P. Ferretti, Eds., pp. 1–29, University of Oulu, Oulu, Finland, 1st edition, 2003. View at Google Scholar
  13. Y. Ikada, “Challenges in tissue engineering,” Journal of the Royal Society Interface, vol. 3, no. 10, pp. 589–601, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Kinoshita and H. Maeda, “Recent developments of functional scaffolds for craniomaxillofacial bone tissue engineering applications,” The Scientific World Journal, vol. 2013, Article ID 863157, 21 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. G. D. Nicodemus and S. J. Bryant, “Cell encapsulation in biodegradable hydrogels for tissue engineering applications,” Tissue Engineering Part B: Reviews, vol. 14, no. 2, pp. 149–165, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Murua, A. Portero, G. Orive, R. M. Hernández, M. de Castro, and J. L. Pedraz, “Cell microencapsulation technology: towards clinical application,” Journal of Controlled Release, vol. 132, no. 2, pp. 76–83, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. S. J. Bryant and K. S. Anseth, “Controlling the spatial distribution of ECM components in degradable PEG hydrogels for tissue engineering cartilage,” Journal of Biomedical Materials Research Part A, vol. 64, no. 1, pp. 70–79, 2003. View at Google Scholar · View at Scopus
  18. S. P. Pilipchuk, A. B. Plonka, A. Monje et al., “Tissue engineering for bone regeneration and osseointegration in the oral cavity,” Dental Materials, vol. 31, no. 4, pp. 317–338, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. C. J. Damien and J. R. Parsons, “Bone graft and bone graft substitutes: a review of current technology and applications,” Journal of Applied Biomaterials, vol. 2, no. 3, pp. 187–208, 1991. View at Google Scholar · View at Scopus
  20. K. Seunarine, N. Gadegaard, M. Tonnen, D. O. Meredith, M. O. Riehle, and C. D. W. Wilkinson, “3D polymer scaffolds for tissue engineering,” Nanomedicine, vol. 1, no. 3, pp. 281–296, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Castillo-Dalí, R. Velázquez-Cayón, M. A. Serrera-Figallo, A. Rodríguez-González-Elipe, J.-L. Gutierrez-Pérez, and D. Torres-Lagares, “Importance of poly(lactic-co-glycolic acid) in scaffolds for guided bone regeneration: a focused review,” The Journal of Oral Implantology, vol. 41, no. 4, pp. e152–e157, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Li and J. Chang, “Fabrication and characterization of bioactive wollastonite/PHBV composite scaffolds,” Biomaterials, vol. 25, no. 24, pp. 5473–5480, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. J. M. Goddard and J. H. Hotchkiss, “Polymer surface modification for the attachment of bioactive compounds,” Progress in Polymer Science, vol. 32, no. 7, pp. 698–725, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. W. Hoffmann, T. Bormann, A. Rossi et al., “Rapid prototyped porous nickel-titanium scaffolds as bone substitutes,” Journal of Tissue Engineering, vol. 5, pp. 1–14, 2014. View at Publisher · View at Google Scholar
  25. K. Cheng and W. S. Kisaalita, “Exploring cellular adhesion and differentiation in a micro-/nano-hybrid polymer scaffold,” Biotechnology Progress, vol. 26, no. 3, pp. 838–846, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Park, S. Bauer, K. Von der Mark, and P. Schmuki, “Nanosize and vitality: TiO2 nanotube diameter directs cell fate,” Nano Letters, vol. 7, no. 6, pp. 1686–1691, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. T. J. Webster and T. A. Smith, “Increased osteoblast function on PLGA composites containing nanophase titania,” Journal of Biomedical Materials Research—Part A, vol. 74, no. 4, pp. 677–686, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. S. J. Hollister, R. D. Maddox, and J. M. Taboas, “Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints,” Biomaterials, vol. 23, no. 20, pp. 4095–4103, 2002. View at Publisher · View at Google Scholar · View at Scopus
  29. J. R. Woodard, A. J. Hilldore, S. K. Lan et al., “The mechanical properties and osteoconductivity of hydroxyapatite bone scaffolds with multi-scale porosity,” Biomaterials, vol. 28, no. 1, pp. 45–54, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. C. H. Park, H. F. Rios, Q. Jin et al., “Biomimetic hybrid scaffolds for engineering human tooth-ligament interfaces,” Biomaterials, vol. 31, no. 23, pp. 5945–5952, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. V. Karageorgiou and D. Kaplan, “Porosity of 3D biomaterial scaffolds and osteogenesis,” Biomaterials, vol. 26, no. 27, pp. 5474–5491, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Bose, M. Roy, and A. Bandyopadhyay, “Recent advances in bone tissue engineering scaffolds,” Trends in Biotechnology, vol. 30, no. 10, pp. 546–554, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. C. Vaquette, W. Fan, Y. Xiao, S. Hamlet, D. W. Hutmacher, and S. Ivanovski, “A biphasic scaffold design combined with cell sheet technology for simultaneous regeneration of alveolar bone/periodontal ligament complex,” Biomaterials, vol. 33, no. 22, pp. 5560–5573, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. P. F. Costa, C. Vaquette, Q. Zhang, R. L. Reis, S. Ivanovski, and D. W. Hutmacher, “Advanced tissue engineering scaffold design for regeneration of the complex hierarchical periodontal structure,” Journal of Clinical Periodontology, vol. 41, no. 3, pp. 283–294, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. B. T. Goh, L. Y. Teh, D. B. P. Tan, Z. Zhang, and S. H. Teoh, “Novel 3D polycaprolactone scaffold for ridge preservation—a pilot randomised controlled clinical trial,” Clinical Oral Implants Research, vol. 26, no. 3, pp. 271–277, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. G. F. Muschler, C. Nakamoto, and L. G. Griffith, “Engineering principles of clinical cell-based tissue engineering,” The Journal of Bone & Joint Surgery—American Volume, vol. 86, no. 7, pp. 1541–1558, 2004. View at Google Scholar · View at Scopus
  37. B. Dhandayuthapani, Y. Yoshida, T. Maekawa, and D. S. Kumar, “Polymeric scaffolds in tissue engineering application: a review,” International Journal of Polymer Science, vol. 2011, Article ID 290602, 19 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. H. I. Chang and Y. Wang, “Cell responses to surface and architecture of tissue engineering scaffolds,” in Regenerative Medicine and Tissue Engineering-Cells and Biomaterials, D. Eberli, Ed., pp. 569–588, In-Tech, Rijeka, Croatia, 2011. View at Google Scholar
  39. F. J. O'Brien, “Biomaterials & scaffolds for tissue engineering,” Materials Today, vol. 14, no. 3, pp. 88–95, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. A. G. Mitsak, J. M. Kemppainen, M. T. Harris, and S. J. Hollister, “Effect of polycaprolactone scaffold permeability on bone regeneration in vivo,” Tissue Engineering Part A, vol. 17, no. 13-14, pp. 1831–1839, 2011. View at Publisher · View at Google Scholar · View at Scopus
  41. D. W. Hutmacher, “Scaffolds in tissue engineering bone and cartilage,” Biomaterials, vol. 21, no. 24, pp. 2529–2543, 2000. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Yeo, B. Rai, E. Sju, J. J. Cheong, and S. H. Teoh, “The degradation profile of novel, bioresorbable PCL–TCP scaffolds: an in vitro and in vivo study,” Journal of Biomedical Materials Research Part A, vol. 84, no. 1, pp. 208–218, 2008. View at Publisher · View at Google Scholar · View at Scopus
  43. Q. Chen, C. Zhu, and G. A. Thouas, “Progress and challenges in biomaterials used for bone tissue engineering: bioactive glasses and elastomeric composites,” Progress in Biomaterials, vol. 1, article 2, 2012. View at Publisher · View at Google Scholar
  44. L. L. Hench, R. J. Splinter, W. C. Allen, and T. K. Greenlee, “Bonding mechanisms at the interface of ceramic prosthetic materials,” Journal of Biomedical Materials Research, vol. 5, no. 6, pp. 117–141, 1971. View at Google Scholar · View at Scopus
  45. S. Ivanovski, C. Vaquette, S. Gronthos, D. W. Hutmacher, and P. M. Bartold, “Multiphasic scaffolds for periodontal tissue engineering,” Journal of Dental Research, vol. 93, no. 12, pp. 1212–1221, 2014. View at Publisher · View at Google Scholar · View at Scopus
  46. C. H. Park, H. F. Rios, Q. Jin et al., “Tissue engineering bone-ligament complexes using fiber-guiding scaffolds,” Biomaterials, vol. 33, no. 1, pp. 137–145, 2012. View at Publisher · View at Google Scholar · View at Scopus
  47. G. Khang, “Evolution of gradient concept for the application of regenerative medicine,” Biosurface and Biotribology, vol. 1, no. 3, pp. 202–213, 2015. View at Publisher · View at Google Scholar
  48. L. S. Nair and C. T. Laurencin, “Biodegradable polymers as biomaterials,” Progress in Polymer Science, vol. 32, no. 8-9, pp. 762–798, 2007. View at Publisher · View at Google Scholar · View at Scopus
  49. I. M. El-Sherbiny and M. H. Yacoub, “Hydrogel scaffolds for tissue engineering: progress and challenges,” Global Cardiology Science and Practice, vol. 2013, no. 3, article 38, 2013. View at Publisher · View at Google Scholar
  50. A. G. Mikos, M. G. Papadaki, S. Kouvroukoglou, S. L. Ishaug, and R. C. Thomson, “Mini-review: islet transplantation to create a bioartificial pancreas,” Biotechnology & Bioengineering, vol. 43, no. 7, pp. 673–677, 1994. View at Publisher · View at Google Scholar · View at Scopus
  51. Y. Cao, A. Rodriguez, M. Vacanti, C. Ibarra, C. Arevalo, and C. A. Vacanti, “Comparative study of the use of poly(glycolic acid), calcium alginate and pluronics in the engineering of autologous porcine cartilage,” Journal of Biomaterials Science, Polymer Edition, vol. 9, no. 5, pp. 475–487, 1998. View at Publisher · View at Google Scholar · View at Scopus
  52. C. D. Sims, P. E. M. Butler, Y. L. Cao et al., “Tissue engineered neocartilage using plasma derived polymer substrates and chondrocytes,” Plastic and Reconstructive Surgery, vol. 101, no. 6, pp. 1580–1585, 1998. View at Publisher · View at Google Scholar · View at Scopus
  53. C. Perka, R.-S. Spitzer, K. Lindenhayn, M. Sittinger, and O. Schultz, “Matrix-mixed culture: new methodology for chondrocyte culture and preparation of cartilage transplants,” Journal of Biomedical Materials Research, vol. 49, no. 3, pp. 305–311, 2000. View at Publisher · View at Google Scholar · View at Scopus
  54. K. Y. Lee and D. J. Mooney, “Hydrogels for tissue engineering,” Chemical Reviews, vol. 101, no. 7, pp. 1869–1879, 2001. View at Publisher · View at Google Scholar · View at Scopus
  55. L. Pastorino, E. Dellacasa, S. Scaglione et al., “Oriented collagen nanocoatings for tissue engineering,” Colloids and Surfaces B: Biointerfaces, vol. 114, pp. 372–378, 2014. View at Publisher · View at Google Scholar · View at Scopus
  56. A. Aravamudhan, D. M. Ramos, J. Nip et al., “Cellulose and collagen derived micro-nano structured scaffolds for bone tissue engineering,” Journal of Biomedical Nanotechnology, vol. 9, no. 4, pp. 719–731, 2013. View at Publisher · View at Google Scholar · View at Scopus
  57. M.-F. Côté, G. Laroche, E. Gagnon, P. Chevallier, and C. J. Doillon, “Denatured collagen as support for a FGF-2 delivery system: physicochemical characterizations and in vitro release kinetics and bioactivity,” Biomaterials, vol. 25, no. 17, pp. 3761–3772, 2004. View at Publisher · View at Google Scholar · View at Scopus
  58. U. Meyer and H. P. Wiesmann, Bone and Cartilage Engineering, Springer, Berlin, Germany, 2006. View at Publisher · View at Google Scholar
  59. I. Aranaz, M. Mengíbar, R. Harris et al., “Functional characterization of chitin and chitosan,” Current Chemical Biology, vol. 3, no. 2, pp. 203–230, 2009. View at Publisher · View at Google Scholar · View at Scopus
  60. J. Sun and H. Tan, “Alginate-based biomaterials for regenerative medicine applications,” Materials, vol. 6, no. 4, pp. 1285–1309, 2013. View at Publisher · View at Google Scholar · View at Scopus
  61. B. M. Holzapfel, J. C. Reichert, J.-T. Schantz et al., “How smart do biomaterials need to be? A translational science and clinical point of view,” Advanced Drug Delivery Reviews, vol. 65, no. 4, pp. 581–603, 2013. View at Publisher · View at Google Scholar · View at Scopus
  62. M. G. Raucci, V. Guarino, and L. Ambrosio, “Biomimetic strategies for bone repair and regeneration,” Journal of Functional Biomaterials, vol. 3, no. 4, pp. 688–705, 2012. View at Publisher · View at Google Scholar
  63. S. J. Florczyk, D.-J. Kim, D. L. Wood, and M. Zhang, “Influence of processing parameters on pore structure of 3D porous chitosan-alginate polyelectrolyte complex scaffolds,” Journal of Biomedical Materials Research Part A, vol. 98, no. 4, pp. 614–620, 2011. View at Publisher · View at Google Scholar · View at Scopus
  64. Z. Cao, C. Dou, and S. Dong, “Scaffolding biomaterials for cartilage regeneration,” Journal of Nanomaterials, vol. 2014, Article ID 489128, 8 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  65. R. Lenz, “Biodegradable polymers,” in Biopolymers I, R. S. Langer and N. A. Peppas, Eds., vol. 107 of Advances in Polymer Science, pp. 1–40, Springer, Berlin, Germany, 1993. View at Publisher · View at Google Scholar
  66. R. J. Kane, H. E. Weiss-Bilka, M. J. Meagher et al., “Hydroxyapatite reinforced collagen scaffolds with improved architecture and mechanical properties,” Acta Biomaterialia, vol. 17, pp. 16–25, 2015. View at Publisher · View at Google Scholar · View at Scopus
  67. J. E. Gough, P. Christian, C. A. Scotchford, and I. A. Jones, “Craniofacial osteoblast responses to polycaprolactone produced using a novel boron polymerisation technique and potassium fluoride post-treatment,” Biomaterials, vol. 24, no. 27, pp. 4905–4912, 2003. View at Publisher · View at Google Scholar · View at Scopus
  68. C. G. Pitt, “Poly (ε-caprolactone) and its copolymers,” in Biodegradable Polymers as Drug Delivery Systems, M. Chassin and R. Langer, Eds., pp. 71–119, Dekker, New York, NY, USA, 1990. View at Google Scholar
  69. J. M. Williams, A. Adewunmi, R. M. Schek et al., “Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering,” Biomaterials, vol. 26, no. 23, pp. 4817–4827, 2005. View at Publisher · View at Google Scholar · View at Scopus
  70. Y. Zhu, C. Gao, and J. Shen, “Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility,” Biomaterials, vol. 23, no. 24, pp. 4889–4895, 2002. View at Publisher · View at Google Scholar · View at Scopus
  71. M. M. Lim, T. Sun, and N. Sultana, “In Vitro biological evaluation of electrospun polycaprolactone/gelatine nanofibrous scaffold for tissue engineering,” Journal of Nanomaterials, vol. 2015, Article ID 303426, 10 pages, 2015. View at Publisher · View at Google Scholar
  72. Q. Chen and G. Thouas, “Bioresorbable polymers,” in Biomaterials: A Basic Introduction, p. 346, CRC Press, Boca Raton, Fla, USA, 2015. View at Google Scholar
  73. L. Yildirimer and A. M. Seifalian, “Three-dimensional biomaterial degradation—material choice, design and extrinsic factor considerations,” Biotechnology Advances, vol. 32, no. 5, pp. 984–999, 2014. View at Publisher · View at Google Scholar · View at Scopus
  74. A. Göpferich, “Mechanisms of polymer degradation and erosion,” Biomaterials, vol. 17, no. 2, pp. 103–114, 1996. View at Publisher · View at Google Scholar · View at Scopus
  75. F. von Burkersroda, L. Schedl, and A. Göpferich, “Why degradable polymers undergo surface erosion or bulk erosion,” Biomaterials, vol. 23, no. 21, pp. 4221–4231, 2002. View at Publisher · View at Google Scholar · View at Scopus
  76. N. L. Davison, F. Barrère-de Groot, and D. W. Grijpma, “Degradation of biomaterials,” in Tissue Engineering, C. A. Van Blitterswijk and J. De Boer, Eds., pp. 177–215, Elsevier, 2nd edition, 2015. View at Google Scholar
  77. S. Li, “Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids,” Journal of Biomedical Materials Research, vol. 48, no. 3, pp. 342–353, 1999. View at Publisher · View at Google Scholar · View at Scopus
  78. E. Tamjid, A. Simchi, J. W. C. Dunlop, P. Fratzl, R. Bagheri, and M. Vossoughi, “Tissue growth into three-dimensional composite scaffolds with controlled micro-features and nanotopographical surfaces,” Journal of Biomedical Materials Research—Part A, vol. 101, no. 10, pp. 2796–2807, 2013. View at Publisher · View at Google Scholar · View at Scopus
  79. A. Brown, S. Zaky, H. Ray Jr., and C. Sfeir, “Porous magnesium/PLGA composite scaffolds for enhanced bone regeneration following tooth extraction,” Acta Biomaterialia, vol. 11, pp. 543–553, 2015. View at Publisher · View at Google Scholar
  80. M. I. Sabir, X. Xu, and L. Li, “A review on biodegradable polymeric materials for bone tissue engineering applications,” Journal of Materials Science, vol. 44, no. 21, pp. 5713–5724, 2009. View at Publisher · View at Google Scholar · View at Scopus
  81. T. Gong, J. Xie, J. Liao, T. Zhang, S. Lin, and Y. Lin, “Nanomaterials and bone regeneration,” Bone Research, vol. 3, article 15029, 2015. View at Publisher · View at Google Scholar
  82. R. Sarkar and G. Banerjee, “Ceramic based bio-medical implants,” InterCeram, vol. 59, no. 2, pp. 98–102, 2010. View at Google Scholar · View at Scopus
  83. W. Thein-Han and H. H. K. Xu, “Collagen-calcium phosphate cement scaffolds seeded with umbilical cord stem cells for bone tissue engineering,” Tissue Engineering Part A, vol. 17, no. 23-24, pp. 2943–2954, 2011. View at Publisher · View at Google Scholar · View at Scopus
  84. R. Z. LeGeros, “Properties of osteoconductive biomaterials: calcium phosphates,” Clinical Orthopaedics and Related Research, vol. 395, pp. 81–98, 2002. View at Google Scholar · View at Scopus
  85. T. J. Blokhuis and J. J. C. Arts, “Bioactive and osteoinductive bone graft substitutes: definitions, facts and myths,” Injury, vol. 42, supplement 2, pp. S26–S29, 2011. View at Publisher · View at Google Scholar · View at Scopus
  86. A. M. C. Barradas, H. Yuan, C. A. van Blitterswijk, and P. Habibovic, “Osteoinductive biomaterials: current knowledge of properties, experimental models and biological mechanisms,” European Cells & Materials, vol. 21, pp. 407–429, 2011. View at Google Scholar · View at Scopus
  87. J. Huang, S. M. Best, W. Bonfield et al., “In vitro assessment of the biological response to nano-sized hydroxyapatite,” Journal of Materials Science: Materials in Medicine, vol. 15, no. 4, pp. 441–445, 2004. View at Publisher · View at Google Scholar · View at Scopus
  88. C. Szpalski, J. Barr, M. Wetterau, P. B. Saadeh, and S. M. Warren, “Cranial bone defects: current and future strategies,” Neurosurgical Focus, vol. 29, no. 6, p. E8, 2010. View at Publisher · View at Google Scholar · View at Scopus
  89. J. Zhao, Y. Liu, W.-B. Sun, and H. Zhang, “Amorphous calcium phosphate and its application in dentistry,” Chemistry Central Journal, vol. 5, article 40, 2011. View at Publisher · View at Google Scholar · View at Scopus
  90. K. D. Johnson, K. E. Frierson, T. S. Keller et al., “Porous ceramics as bone graft substitutes in long bone defects: a biomechanical, histological, and radiographic analysis,” Journal of Orthopaedic Research, vol. 14, no. 3, pp. 351–369, 1996. View at Publisher · View at Google Scholar · View at Scopus
  91. E. B. Nery, K. K. Lee, S. Czajkowski et al., “A Veterans Administration Cooperative Study of biphasic calcium phosphate ceramic in periodontal osseous defects,” Journal of Periodontology, vol. 61, no. 12, pp. 737–744, 1990. View at Publisher · View at Google Scholar · View at Scopus
  92. S. E. Lobo and T. L. Arinzeh, “Biphasic calcium phosphate ceramics for bone regeneration and tissue engineering applications,” Materials, vol. 3, no. 2, pp. 815–826, 2010. View at Publisher · View at Google Scholar · View at Scopus
  93. H. R. R. Ramay and M. Zhang, “Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering,” Biomaterials, vol. 25, no. 21, pp. 5171–5180, 2004. View at Publisher · View at Google Scholar · View at Scopus
  94. V. Petrovic, P. Zivkovic, D. Petrovic, and V. Stefanovic, “Craniofacial bone tissue engineering,” Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, vol. 114, no. 3, pp. e1–e9, 2012. View at Publisher · View at Google Scholar · View at Scopus
  95. L. L. Hench, “The story of bioglass,” Journal of Materials Science: Materials in Medicine, vol. 17, no. 1, pp. 967–978, 2006. View at Publisher · View at Google Scholar · View at Scopus
  96. W. Huang, D. E. Day, K. Kittiratanapiboon, and M. N. Rahaman, “Kinetics and mechanisms of the conversion of silicate (45S5), borate, and borosilicate glasses to hydroxyapatite in dilute phosphate solutions,” Journal of Materials Science: Materials in Medicine, vol. 17, no. 7, pp. 583–596, 2006. View at Publisher · View at Google Scholar · View at Scopus
  97. W. Huang, M. N. Rahaman, D. E. Day, and Y. Li, “Mechanisms of converting silicate, borate, and borosilicate glasses to hydroxyapatite in dilute phosphate solutions,” Physics and Chemistry of Glasses: European Journal of Glass Science and Technology Part B, vol. 47, no. 6, pp. 647–658, 2006. View at Google Scholar
  98. H.-W. Kim, E.-J. Lee, I.-K. Jun, H.-E. Kim, and J. C. Knowles, “Degradation and drug release of phosphate glass/polycaprolactone biological composites for hard-tissue regeneration,” Journal of Biomedical Materials Research—Part B Applied Biomaterials, vol. 75, no. 1, pp. 34–41, 2005. View at Publisher · View at Google Scholar · View at Scopus
  99. L. L. Hench, “Bioceramics: from concept to clinic,” Journal of the American Ceramic Society, vol. 74, no. 7, pp. 1487–1510, 1991. View at Publisher · View at Google Scholar
  100. R. Tevlin, A. McArdle, D. Atashroo et al., “Biomaterials for craniofacial bone engineering,” Journal of Dental Research, vol. 93, no. 12, pp. 1187–1195, 2014. View at Publisher · View at Google Scholar · View at Scopus
  101. Y. Zhang and C. Wu, “Bioactive inorganic and organic composite materials for bone regeneration and gene delivery,” in Advanced Bioactive Inorganic Materials for Bone Regeneration and Drug Delivery, C. Wu, J. Chang, and Y. Xiao, Eds., pp. 178–205, CRC Press, Boca Raton, Fla, USA, 2013. View at Google Scholar
  102. E. Długoń, W. Niemiec, A. Frączek-Szczypta, P. Jeleń, M. Sitarz, and M. Błazewicz, “Spectroscopic studies of electrophoretically deposited hybrid HAp/CNT coatings on titanium,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 133, pp. 872–875, 2014. View at Publisher · View at Google Scholar · View at Scopus
  103. M. P. Staiger, A. M. Pietak, J. Huadmai, and G. Dias, “Magnesium and its alloys as orthopedic biomaterials: a review,” Biomaterials, vol. 27, no. 9, pp. 1728–1734, 2006. View at Publisher · View at Google Scholar · View at Scopus
  104. K. Alvarez and H. Nakajima, “Metallic scaffolds for bone regeneration,” Materials, vol. 2, no. 3, pp. 790–832, 2009. View at Publisher · View at Google Scholar · View at Scopus
  105. N. J. Hallab, J. J. Jacobs, and J. L. Katz, “Application of materials in medicine, biology, and artificial organs: orthopedic applications,” in Biomaterials Science: An Introduction to Materials in Medicine, B. D. Ratner, A. S. Hoffman, F. Schoen, and J. E. Lemons, Eds., pp. 526–555, Elsevier Academic Press, New York, NY, USA, 2004. View at Google Scholar
  106. J.-H. Kim, F. A. Sheikh, H. W. Ju et al., “3D silk fibroin scaffold incorporating titanium dioxide (TiO2) nanoparticle (NPs) for tissue engineering,” International Journal of Biological Macromolecules, vol. 68, pp. 158–168, 2014. View at Publisher · View at Google Scholar · View at Scopus
  107. S. Wu, X. Liu, T. Hu et al., “A biomimetic hierarchical scaffold: natural growth of nanotitanates on three-dimensional microporous Ti-based metals,” Nano Letters, vol. 8, no. 11, pp. 3803–3808, 2008. View at Publisher · View at Google Scholar · View at Scopus
  108. H. J. Haugen, M. Monjo, M. Rubert et al., “Porous ceramic titanium dioxide scaffolds promote bone formation in rabbit peri-implant cortical defect model,” Acta Biomaterialia, vol. 9, no. 2, pp. 5390–5399, 2013. View at Publisher · View at Google Scholar · View at Scopus
  109. D. Persaud-Sharma and A. McGoron, “Biodegradable magnesium alloys: a review of material development and applications,” Journal of Biomimetics, Biomaterials, and Tissue Engineering, vol. 12, no. 1, pp. 25–39, 2012. View at Publisher · View at Google Scholar · View at Scopus
  110. B. Heublein, R. Rohde, V. Kaese, M. Niemeyer, W. Hartung, and A. Haverich, “Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?” Heart, vol. 89, no. 6, pp. 651–656, 2003. View at Publisher · View at Google Scholar · View at Scopus
  111. S. Yoshizawa, A. Brown, A. Barchowsky, and C. Sfeir, “Magnesium ion stimulation of bone marrow stromal cells enhances osteogenic activity, simulating the effect of magnesium alloy degradation,” Acta Biomaterialia, vol. 10, no. 6, pp. 2834–2842, 2014. View at Publisher · View at Google Scholar · View at Scopus
  112. J. E. Gray and B. Luan, “Protective coatings on magnesium and its alloys—a critical review,” Journal of Alloys and Compounds, vol. 336, no. 1-2, pp. 88–113, 2002. View at Publisher · View at Google Scholar · View at Scopus
  113. E. Zhang, L. Xu, G. Yu, F. Pan, and K. Yang, “In vivo evaluation of biodegradable magnesium alloy bone implant in the first 6 months implantation,” Journal of Biomedical Materials Research, Part A, vol. 90, no. 3, pp. 882–893, 2009. View at Google Scholar · View at Scopus
  114. E. Zhang, L. Xu, and K. Yang, “Formation by ion plating of Ti-coating on pure Mg for biomedical applications,” Scripta Materialia, vol. 53, no. 5, pp. 523–527, 2005. View at Publisher · View at Google Scholar · View at Scopus
  115. F. Geng, L. L. Tan, X. X. Jin, J. Y. Yang, and K. Yang, “The preparation, cytocompatibility, and in vitro biodegradation study of pure β-TCP on magnesium,” Journal of Materials Science: Materials in Medicine, vol. 20, no. 5, pp. 1149–1157, 2009. View at Publisher · View at Google Scholar · View at Scopus
  116. M. M. Erol, V. Mouriňo, P. Newby et al., “Copper-releasing, boron-containing bioactive glass-based scaffolds coated with alginate for bone tissue engineering,” Acta Biomaterialia, vol. 8, no. 2, pp. 792–801, 2012. View at Publisher · View at Google Scholar · View at Scopus
  117. M. G. Cascone, N. Barbani, C. Cristallini, P. Giusti, G. Ciardelli, and L. Lazzeri, “Bioartificial polymeric materials based on polysaccharides,” Journal of Biomaterials Science, Polymer Edition, vol. 12, no. 3, pp. 267–281, 2001. View at Publisher · View at Google Scholar · View at Scopus
  118. I. Manjubala, I. Ponomarev, I. Wilke, and K. D. Jandt, “Growth of osteoblast-like cells on biomimetic apatite-coated chitosan scaffolds,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 84, no. 1, pp. 7–16, 2008. View at Publisher · View at Google Scholar · View at Scopus
  119. L. Polo-Corrales, M. Latorre-Esteves, and J. E. Ramirez-Vick, “Scaffold design for bone regeneration,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 15–56, 2014. View at Publisher · View at Google Scholar · View at Scopus
  120. N. Thuaksuban, T. Nuntanaranont, W. Pattanachot, S. Suttapreyasri, and L. K. Cheung, “Biodegradable polycaprolactone-chitosan three-dimensional scaffolds fabricated by melt stretching and multilayer deposition for bone tissue engineering: assessment of the physical properties and cellular response,” Biomedical Materials, vol. 6, no. 1, Article ID 015009, 2011. View at Publisher · View at Google Scholar · View at Scopus
  121. B. W. Thimm, S. Wüst, S. Hofmann, H. Hagenmüller, and R. Müller, “Initial cell pre-cultivation can maximize ECM mineralization by human mesenchymal stem cells on silk fibroin scaffolds,” Acta Biomaterialia, vol. 7, no. 5, pp. 2218–2228, 2011. View at Publisher · View at Google Scholar · View at Scopus
  122. L. Moroni, J. R. De Wijn, and C. A. Van Blitterswijk, “3D fiber-deposited scaffolds for tissue engineering: influence of pores geometry and architecture on dynamic mechanical properties,” Biomaterials, vol. 27, no. 7, pp. 974–985, 2006. View at Publisher · View at Google Scholar · View at Scopus
  123. F. Obregon, C. Vaquette, S. Ivanovski, D. W. Hutmacher, and L. E. Bertassoni, “Three-dimensional bioprinting for regenerative dentistry and craniofacial tissue engineering,” Journal of Dental Research, vol. 94, supplement 9, pp. 143S–152S, 2015. View at Publisher · View at Google Scholar · View at Scopus
  124. L. Koch, S. Kuhn, H. Sorg et al., “Laser printing of skin cells and human stem cells,” Tissue Engineering Part C: Methods, vol. 16, no. 5, pp. 847–854, 2010. View at Publisher · View at Google Scholar · View at Scopus
  125. H. N. Chia and B. M. Wu, “Recent advances in 3D printing of biomaterials,” Journal of Biological Engineering, vol. 9, article 4, 2015. View at Publisher · View at Google Scholar · View at Scopus
  126. W.-Y. Yeong, C.-K. Chua, K.-F. Leong, and M. Chandrasekaran, “Rapid prototyping in tissue engineering: challenges and potential,” Trends in Biotechnology, vol. 22, no. 12, pp. 643–652, 2004. View at Publisher · View at Google Scholar · View at Scopus
  127. P. X. Ma, “Biomimetic materials for tissue engineering,” Advanced Drug Delivery Reviews, vol. 60, no. 2, pp. 184–198, 2008. View at Publisher · View at Google Scholar · View at Scopus
  128. C. H. Park, H. F. Rios, A. D. Taut et al., “Image-based, fiber guiding scaffolds: a platform for regenerating tissue interfaces,” Tissue Engineering Part C: Methods, vol. 20, no. 7, pp. 533–542, 2014. View at Publisher · View at Google Scholar · View at Scopus
  129. M. Figliuzzi, F. G. Mangano, L. Fortunato et al., “Vertical ridge augmentation of the atrophic posterior mandible with custom-made, computer-aided design/computer-aided manufacturing porous hydroxyapatite scaffolds,” Journal of Craniofacial Surgery, vol. 24, no. 3, pp. 856–859, 2013. View at Publisher · View at Google Scholar · View at Scopus
  130. F. Mangano, A. Macchi, J. A. Shibli et al., “Maxillary ridge augmentation with custom-made CAD/CAM scaffolds. A 1-year prospective study on 10 patients,” Journal of Oral Implantology, vol. 40, no. 5, pp. 561–569, 2014. View at Publisher · View at Google Scholar · View at Scopus
  131. F. G. Mangano, P. A. Zecca, R. Van Noort et al., “Custom-made computer-Aided-design/computer-Aided-manufacturing biphasic calcium-phosphate scaffold for augmentation of an atrophic mandibular anterior ridge,” Case Reports in Dentistry, vol. 2015, Article ID 941265, 11 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  132. A. Nandakumar, A. Barradas, J. de Boer, L. Moroni, C. van Blitterswijk, and P. Habibovic, “Combining technologies to create bioactive hybrid scaffolds for bone tissue engineering,” Biomatter, vol. 3, no. 2, Article ID e23705, 2013. View at Publisher · View at Google Scholar
  133. K. Kim, C. H. Lee, B. K. Kim, and J. J. Mao, “Anatomically shaped tooth and periodontal regeneration by cell homing,” Journal of Dental Research, vol. 89, no. 8, pp. 842–847, 2010. View at Publisher · View at Google Scholar · View at Scopus
  134. C. H. Lee, J. Hajibandeh, T. Suzuki, A. Fan, P. Shang, and J. J. Mao, “Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex,” Tissue Engineering Part A, vol. 20, no. 7-8, pp. 1342–1351, 2014. View at Publisher · View at Google Scholar · View at Scopus
  135. T. Akizuki, S. Oda, M. Komaki et al., “Application of periodontal ligament cell sheet for periodontal regeneration: a pilot study in beagle dogs,” Journal of Periodontal Research, vol. 40, no. 3, pp. 245–251, 2005. View at Publisher · View at Google Scholar · View at Scopus
  136. G. Rasperini, S. P. Pilipchuk, C. L. Flanagan et al., “3D-printed bioresorbable scaffold for periodontal repair,” Journal of Dental Research, vol. 94, supplement 9, pp. 153S–157S, 2015. View at Publisher · View at Google Scholar · View at Scopus
  137. V. R. Sinha, K. Bansal, R. Kaushik, R. Kumria, and A. Trehan, “Poly-ε-caprolactone microspheres and nanospheres: an overview,” International Journal of Pharmaceutics, vol. 278, no. 1, pp. 1–23, 2004. View at Publisher · View at Google Scholar · View at Scopus
  138. M. A. Woodruff and D. W. Hutmacher, “The return of a forgotten polymer—polycaprolactone in the 21st century,” Progress in Polymer Science, vol. 35, no. 10, pp. 1217–1256, 2010. View at Publisher · View at Google Scholar · View at Scopus
  139. R. B. Dixon, N. D. Tricker, and L. P. Garetto, “Bone turnover in elderly canine mandible and tibia,” Journal of Dental Research, vol. 76, IADR abstract no. 2579, p. 336, 1997. View at Google Scholar
  140. E. Díaz, I. Sandonis, and M. B. Valle, “In vitro degradation of poly(caprolactone)/nHA composites,” Journal of Nanomaterials, vol. 2014, Article ID 802435, 8 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  141. H. F. Rios and W. V. Giannobile, “Preclinical Protocols for Periodontal Regeneration,” in Osteology Guidelines for Oral and Maxillofacial Regeneration Preclinical Models for Translational Research, W. V. Giannobile and M. Nevins, Eds., pp. 77–104, Quintessence, Berlin, Germany, 2011. View at Google Scholar
  142. J. P. Carrel, A. Wiskott, M. Moussa, P. Rieder, S. Scherrer, and S. Durual, “A 3D printed TCP/HA structure as a new osteoconductive scaffold for vertical bone augmentation,” Clinical Oral Implants Research, vol. 27, no. 1, pp. 55–62, 2016. View at Google Scholar
  143. C. Mangano, B. Barboni, L. Valbonetti et al., “In vivo behavior of a custom-made 3D synthetic bone substitute in sinus augmentation procedures in sheep,” Journal of Oral Implantology, vol. 41, no. 3, pp. 241–251, 2015. View at Publisher · View at Google Scholar · View at Scopus
  144. C. H. Park, K. H. Kim, H. F. Rios, Y. M. Lee, W. V. Giannobile, and Y. J. Seol, “Spatiotemporally controlled microchannels of periodontal mimic scaffolds,” Journal of Dental Research, vol. 93, no. 12, pp. 1304–1312, 2014. View at Publisher · View at Google Scholar · View at Scopus
  145. U. Hersel, C. Dahmen, and H. Kessler, “RGD modified polymers: biomaterials for stimulated cell adhesion and beyond,” Biomaterials, vol. 24, no. 24, pp. 4385–4415, 2003. View at Publisher · View at Google Scholar · View at Scopus
  146. D. A. Wahl and J. T. Czernuszka, “Collagen-hydroxyapatite composites for hard tissue repair,” European Cells and Materials, vol. 11, pp. 43–56, 2006. View at Google Scholar · View at Scopus
  147. F. Asa'ad, G. Rasperini, G. Pagni, H. F. Rios, and A. B. Giannì, “Pre-augmentation soft tissue expansion: an overview,” Clinical Oral Implants Research, vol. 27, no. 5, pp. 505–522, 2016. View at Publisher · View at Google Scholar · View at Scopus