Randomized Clinical Trial of a Self-Adhering Flowable Composite for Class I Restorations: 2-Year Results
Table 1
Composition and application procedure of the materials used.
Material
Composition
Application
Vertise Flow (Kerr, USA) Lot # 1000010715
Matrix: GPDM adhesive monomer, UDMA, BisGMA, and other methacrylate comonomers, photoinitiators Fillers: 70% by weight. Ytterbium Fluoride, barium aluminosilicate glass, prepolymerized fillers, and colloidal silica
Brush the layer with moderate pressure for 15–20 seconds to obtain a thin layer (<0,5 mm) Light-cure for 20 seconds Place additional increments of Vertise Flow in 2 mm or less Light-cure for 20 seconds
Premise Flowable (Kerr, USA) Lot # 1000010505
Matrix: Bis-GMA, ethoxylated bis-phenol-A-dimethacrylate, TEGMA, light-cure initiators, and stabilizers Fillers: 72,5% by weight. Barium glass, prepolymerized fillers, and silica nanoparticles
Apply in increment of 2 mm or less Light-cure for 10 seconds
OptiBond All-In-One (Kerr, USA) Lot # 3354615
Glycerol phosphate dimethacrylate (GPDM), mono- and difunctional methacrylate monomers, water, acetone, ethanol, nanofillers, and camphorquinone (CQ)
Apply one coat and scrub it using a disposable microbrush for 20 seconds Repeat step (1) Dry with air for 5 seconds Light-cure for 10 seconds