Table of Contents Author Guidelines Submit a Manuscript
International Journal of Electrochemistry
Volume 2016 (2016), Article ID 3720280, 9 pages
Research Article

Factors Affecting Corrosion in Gulf of Finland Brackish Water

Department of Materials Science and Engineering, Aalto University, P.O. Box 16200, Aalto, 00076 Espoo, Finland

Received 29 November 2015; Accepted 26 April 2016

Academic Editor: Grzegorz Milczarek

Copyright © 2016 Jari Aromaa and Olof Forsén. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. C. Dexter, R. A. Dalrymple, and N. Kobayashi, The Marine Environment. Materials for Marine Systems and Structures, Academic Press, Boston, Mass, USA, 1988.
  2. W. Katz, Seawater, vol. 11 of DECHEMA Corrosion Handbook, Edited by G. Jänsch-Kaiser, VCH, Weinheim, Germany, 1992.
  3. J. Jelovica, J. Romanoff, S. Ehlers, and H. Remes, Ultimate Strength Tests of Corroded Web-Core and Corrugated-Core Sandwich Beams, Aalto University Publication Series SCIENCE, TECHNOLOGY, Espoo, 2011.
  4. J. Aromaa, D. Luhulima, A. Talo, and O. Forsén, “Corrosion prevention in cold brackish water,” in Trends in Electrochemistry and Corrosion at the Beginning of the 21st Century, P.-L. Cabot Julia and E. Brillas Coso, Eds., pp. 823–844, Universitat de Barcelona, Barcelona, Spain, 2004. View at Google Scholar
  5. Marine Corrosion of Stainless Steels and D. Feron, “European Federation of Corrosion,” Report EFC 33, IOM Communications, London, UK, 2001. View at Google Scholar
  6. S. Koivuniemi, The distribution of cathodic protection on icebreaker's hull in different parts of the Baltic Sea [M.S. thesis], Helsinki University of Technology, Espoo, Finland, 1999 (Finnish).
  7. J. Aromaa, A. Pehkonen, and O. Forsén, “Cathodic protection of ships in brackish water,” Journal of Solid State Electrochemistry, vol. 10, no. 9, pp. 681–688, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Prazak, “Pitting corrosion of stainless steel—prediction and protection,” in Proceedings of the European Corrosion Congress (EUROCORR '91), pp. 361–365, Budapest, Hungary, 1991.
  9. O. Frosén, J. Aromaa, M. Tavi, and J. Virtanen, “Localized corrosion of stainless steels in ammonium chloride solutions,” Materials Performance, vol. 36, no. 5, pp. 59–63, 1997. View at Google Scholar · View at Scopus
  10. U. Kivisäkk, B. Espelid, and D. Féron, “Methodology of crevice corrosion testing for stainless steels in natural and treated seawaters,” Report EFC 60, Maney Publishing, Leeds, UK, 2010. View at Google Scholar
  11. M. M. Ahmmad and Y. Sumi, “Strength and deformability of corroded steel plates under quasi-static tensile load,” Journal of Marine Science and Technology, vol. 15, no. 1, pp. 1–15, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. M. R. Islam and Y. Sumi, “Geometrical effects on strength and deformability of corroded steel plates,” in Advances in Marine Structures, C. Guedes Soares and W. Fricke, Eds., pp. 151–159, Taylor & Francis Group, London, UK, 2011. View at Google Scholar