Abstract

Thermal convection of a nanofluid layer in the presence of imposed vertical magnetic field saturated by a porous medium is investigated for both-free, rigid-free, and both-rigid boundaries using Darcy-Brinkman model. The effects of Brownian motion and thermophoretic forces due to the presence of nanoparticles and Lorentz’s force term due to the presence of magnetic field have been considered in the momentum equations along with Maxwell’s equations. Keeping in mind applications of flow through porous medium in geophysics, especially in the study of Earth’s core, and the presence of nanoparticles therein, the hydromagnetic stability of a nanofluid layer in porous medium is considered in the present formulation. An analytical investigation is made by applying normal mode technique and Galerkin type weighted residuals method and the stability of Cu-water and Ag-water nanofluids is compared. Mode of heat transfer is through stationary convection without the occurrence of oscillatory motions. Stability of the system gets improved appreciably by raising the Chandrasekhar number as well as Darcy number whereas increase in porosity hastens the onset of instability. Further, stability of the system gets enhanced as we proceed from both-free boundaries to rigid-free and to both-rigid boundaries.

1. Introduction

The concept of nanofluids has improved the heat transfer mechanism by replacing the suspension of micrometer sized particles with nanometer sized particles in conventional fluids. These nanometer sized particles are called nanoparticles which may be metals, metal oxides, carbides, nitrides, or semiconductors. The host liquids may be water, ethylene glycol, propylene glycol, and so forth. The magnificent idea of introducing nanofluids first came into the mind of Choi [1] who claimed the enhanced heat transfer with the addition of nanoparticles. Due to the ultra fine size of nanoparticles, nanofluids have overcome the limitations of micrometer and millimeter sized particles such as settling down in fluid, erosion, and clogging in channel or low thermal conductivity of fluids. Eastman et al. [2] found that dispersion of ultrafine particles in regular fluids improves the physical properties of that fluid. The enhanced physical properties of nanofluids can be utilized in a vast variety of applications [3, 4]. A well comprehensive model for the enhanced thermal conductivity of nanofluids has been given by Wang et al. [5].

The problem of thermal convection for regular fluids has been discussed in length in a treatise by Chandrasekhar [6]. The problem of thermal convection for nanofluids has been initiated by Kim et al. [7]. Tzou [8] studied the problem analytically and used eigenfunction expansion method to solve the conservation equations given by Buongiorno and he found that critical Rayleigh number is reduced with the addition of nanoparticles. Nield and Kuznetsov [9, 10] investigated the onset of thermal convection in a nanofluid layer for porous/nonporous medium. Kuznetsov and Nield [11] further extended the problem using Darcy-Brinkman model. Effect of rotation on thermal convection has been accounted for by Bhadauria and Agarwal [12] and Chand and Rana [13] in porous/nonporous medium and it was established that addition of Coriolis force term in momentum equation increases the stability of the system. Gupta et al. [14] and Yadav et al. [15] were the first authors for studying convection problem in the presence of imposed magnetic field for bottom heavy and top heavy distribution of nanoparticles, respectively. It was found that magnetic field postpones the onset of thermal convection and the mode of heat transfer is through oscillatory motions for bottom heavy distribution whereas it is through stationary convection for top heavy arrangement of nanoparticles.

The onset of thermal instability of a fluid layer in porous medium has its major application in geophysics particularly in underground reservoirs and in enhanced oil recovery in addition to the usual industrial applications. Nanofluids in porous medium emerge out to have usage in porous foam and microchannel heat sinks which are used for electronic cooling. Applying magnetic field on horizontal layer of nanofluid exhibits some notable features which make it essential to investigate the effects of magnetic field in porous medium. The present paper formulates to present this effect using Darcy-Brinkman model for three types of boundaries: both-free, rigid-free, and both-rigid. The thermal instability problem is analyzed within the framework of normal mode technique and one term weighted residuals method. Lorentz force term is added in the momentum equation in addition to the body and buoyancy forces and an extra viscous term is added in the Darcy equation for consideration of Darcy-Brinkman model and it gives rise to two additional parameters: Darcy number and Chandrasekhar number. Stability of the system gets improved appreciably by raising the applied magnetic field/hence Chandrasekhar number as well as Darcy number whereas increase in porosity hastens the onset of instability. Oscillatory motions are not possible and stability of the system increases appreciably as we proceed from both-free boundaries to rigid-free and to both-rigid boundaries.

2. Formulation of Problem and Conservation Equations in Porous Medium

A horizontal layer of nanofluid of infinite length and thickness in a homogenous porous medium is considered which is assumed to be at rest initially. Disturbance is caused by heating from beneath the layer so that are the temperatures and () are the nanoparticle’s volume fractions at lower and upper boundaries, respectively (as shown in Figure 1). Porous medium considered here has porosity and medium permeability . Gravity force is acting vertically downwards and magnetic field is acting in vertically upwards direction. The Darcy velocity is denoted by “” which is related to “” the nanofluid velocity as .

The conservation equations for mass, nanoparticles, momentum, and thermal energy in porous medium using Brinkman’s model in the presence of magnetic field are [6, 9]where is the magnetic diffusivity and is the nanofluid’s density which is given bywhere , , , , , , , , , , , , , , and denote, respectively, the Darcy velocity, the Brownian diffusion coefficient, the thermophoretic diffusion coefficient, the density of the fluid, the density of nanoparticles, the heat capacity of the fluid, the heat capacity of the medium, the heat capacity of the nanoparticles, the nanoparticles volume fraction, the viscosity of the fluid, the effective viscosity, the magnetic permeability, the components of magnetic field, the pressure, and the effective thermal conductivity of the porous medium.

Now the above equations are nondimensionalized usingThen the nondimensional forms of (1)–(6) after omitting the symbol ~ arewherethe Prandtl number, the magnetic Prandtl number, the Lewis number, the thermal Rayleigh number, the Darcy number, the basic density Rayleigh number, the concentration Rayleigh number, the modified diffusivity ratio, the modified particle-density increment, and the Chandrasekhar number are the various nondimensional parameters, respectively. It is worthwhile to mention that Boussinesq approximation has been used to linearize the system of equations.

3. Primary Flow and Disturbance Equations

The primary flow is described by the state of the system which is at rest whereas temperature, pressure, and volume fraction of nanoparticles are varying in the vertical direction; that is, and by putting above equations in (11) we getEquation (17) along with the boundary conditions gives the solution asUsing the parametric values of nanofluid parameters ( ranges from 102 to 103, is less than 10) and neglecting the terms of second and higher order in the expansion of exponential function, we get the best approximate solution asDisturbance on the primary flow is caused by heating from beneath the nanofluid layer and these disturbances are assumed to be small so thatwith , . By applying these perturbations to (9)–(14), the resulting equations are linearized by using the concept of linear theory. The obtained system of perturbation equations will be analyzed within the framework of normal modes and single term Galerkin method.

4. Normal Mode Analysis

Now the disturbances are examined by using the technique of superposition of basic modes which are described by the patternwhere and represent the wave numbers in horizontal and vertical directions, respectively, and represents the growth rate parameter. The system of perturbation equations reduces toAfter the process of elimination, the above set of equations reduce towhere and is the resultant wave number in nondimensional form. Now, single term approximation of Galerkin weighted residuals approach is adopted to solve (23). In this approach, choice of trial functions , , and depends on the relevant boundary conditions and we writeFor one term approximation we put . Let us substitute (24) into (23) and make use of orthogonality to the trial functions; we obtain a system of three equations in three unknowns . Elimination of these unknowns from the obtained set of equations gives the eigenvalue equation.

5. Results and Discussions

5.1. Free-Free Boundaries and Special Cases

The boundary conditions on both-free boundary surfaces areon the boundaries [6]. Trial functions satisfying the above boundary conditions can be chosen as , , and . Let us substitute this solution in (23) and follow the process of integration and elimination of from the obtained set of equations; the eigenvalue equation becomes

At the state of marginal stability, when the amplitudes of small disturbances grow or damp aperiodically then the transition from stability to instability takes place via a stationary pattern of motions which is described by . Then the eigenvalue equation (26) reduces to

Case 1. When , (28) turns out to bewhich confirms that our result coincides with the Brinkman model of Kuznetsov and Nield [11]. The values of thermal Rayleigh number and wave number at which instability sets in (critical values) are found by taking

Case 2. When , , (29) reduces to As a function of , (31) gets its lowest value whenwhich is in confirmation with the outcome of Horton-Rogers Lapwood model of Nield and Kuznetsov [9]. By omitting the nanoparticle’s term and magnetic field term we get the critical Rayleigh number as .

Case 3. When , , (28) reduces toThe right-hand side attains its minimum value at and its minimum value is given by

From (34) it is clear that in the absence of nanoparticles and magnetic field critical value of thermal Rayleigh number is for the case when Darcy number vanishes (). The value of critical Rayleigh number for the case when tends to infinity is (from (37)) which coincides with its value for the regular fluid. Thus when is large, the nanofluid behaves like a regular fluid. It is clear from (27) that the suspension of nanoparticles in conventional fluids lowers the critical value of Rayleigh number as all the parameters are positive for the present configuration of nanoparticles and the expression appears with negative sign. Thus the system with the distribution of nanoparticles at the top of the fluid layer is less stable as compared to regular fluid and bottom heavy distribution of nanoparticles.

5.2. Rigid-Free Boundaries

Let us now consider the lower boundary of the fluid to be a rigid surface while the upper boundary surface is free. Then the relevant conditions on the boundary surfaces for areThe trial function appropriate to these boundaries isBy making use of single term Galerkin method and orthogonality, the eigenvalue equation in the present case becomesFor stationary convection, the eigenvalue equation (40) takes the form When and , (41) attains its minimum value as at . In the presence of magnetic field, that is, for , , and , the critical value increases appreciably as is given by at . Thus magnetic field has a strong stabilizing effect for the case of rigid-free boundaries. When is large, comparable to unity, that is, , critical Rayleigh number is given by at , while, in the presence of magnetic field , it increases significantly; that is, at . This shows that magnetic field and Darcy number both inhibit the onset of convection and contribute largely towards the stability of the system.

5.3. Rigid-Rigid Boundaries

Let us now consider that both boundaries of the fluid layer are rigid. Therefore, vanishing of normal and horizontal components of velocity to the rigid surface (no slip condition) leads to the following conditions on boundaries:for perfectly conducting boundaries. The suitable trial functions satisfying these boundary conditions areUsing the approximation of one term Galerkin method and orthogonality, the eigenvalue equation becomesLet us discuss the case of stationary convection by putting in (44). The expression for Rayleigh number for both-rigid boundaries becomesWhen and , (45) attains its minimum value as at . In the presence of magnetic field, that is, for , , , the critical value increases appreciably as is given by at . Thus magnetic field predominantly stabilizes the nanofluid layer system for the case of rigid-rigid boundaries. When is large, comparable to unity, , critical Rayleigh number is given by at while, in the presence of magnetic field , it increases significantly, that is, at . Thus, both Chandrasekhar number and Darcy number contribute significantly towards the stability of the system and this stability increases as we move from both-free boundaries to rigid-free boundaries and then to both-rigid boundaries.

6. Numerical Results and Discussion

Let us now consider the numerical/graphical investigation of the problem by considering numerical values of various parameters under consideration for rigid-rigid, rigid-free, and free-free boundaries. To carry out computations, (27), (41), and (45) are used for both-free, rigid-free, and both-rigid boundaries, respectively. The values of nanofluid parameters for are , , and for Cu-water nanofluid and , , and for Ag-water nanofluid. Figures 27 show the graphical results for stationary convection for Cu-water nanofluid and Ag-water nanofluid in which concentration of nanoparticles at the upper boundary is more than that at the lower boundary.

Figures 2-3 are plot of and with the variation in Darcy number for Cu-water and Ag-water nanofluids for three different boundaries. Clearly, increases and decreases with the increase in for all the three boundaries. Further, the curves for rigid-free boundaries lie between the curves for both-rigid and both-free boundaries which confirm the earlier result that rigid-rigid boundaries exhibit higher stability than rigid-free and both-free boundaries. Also, the curves showing the effect of Darcy number for Ag-water nanofluid lie below the curves for Cu-water nanofluid which means that Cu-water nanofluid exhibits higher stability as compared to Ag-water nanofluid in the present configuration.

Figures 4-5 correspond to the variation of and with the variation in Chandrasekhar number for fixed values of and Figures 6-7 show the variation of porosity for fixed , for both types of nanofluids. The values of as well as increase appreciably with the increase in Chandrasekhar number and decrease significantly with the rise in porosity. Thus the applied magnetic field and porosity have opposing effects of stabilizing/destabilizing the fluid layer system. Further, (27), (41), and (45) show that thermal Rayleigh numbers for stationary convection are independent of both Prandtl number and magnetic Prandtl number. Further increase in concentration of nanoparticles makes the system unstable by decreasing the critical value of thermal Rayleigh number. It is due to the fact that the parameters are all positive and the expression appears with negative sign. However this can well be compensated by increasing the magnetic field and Darcy number. Further the stability of Cu-water nanofluid is higher than that of Ag-water nanofluid in the presence of magnetic field in porous medium.

7. Conclusions

Keeping in mind the application of flow through porous medium in the presence of magnetic field in geophysics particularly in underground reservoirs, enhanced oil recovery, soil sciences and in hydrology; we have investigated the impact of vertical magnetic field on a nanofluid layer using Darcy-Brinkman model for three different boundaries. The presence of nanoparticles is an essential feature of these processes which introduces two additional effects: Brownian motion and thermophoretic forces. The analysis is carried out within the framework of linear stability theory, normal mode analysis, and single term Galerkin approximation. It is found that the instability sets in through the mode of stationary convection instead of oscillatory motions. The condition for the occurrence of oscillatory motions is that the two buoyancy forces (density gradient of nanoparticles and density variation due to heating from the bottom) must act in opposite directions. The value of critical Rayleigh number is decreased to an appreciable extent due to the presence of nanoparticles on the top whereas it increases for the bottom heavy configuration of nanoparticles. This is due to the fact that the top heavy arrangement works in tandem together with the known fact of thermal conductivity enhancement. While for bottom heavy arrangement of nanoparticles, buoyancy forces play antagonistic roles which results in generating oscillatory motions. It is this aspect that triggers the reversing trend in the two modes of configuration. From (28), it is clear that the suspension of nanoparticles in conventional fluids lowers the critical value of Rayleigh number as all the parameters are positive for the present configuration of nanoparticles and the expression appears with negative sign. Thus the system with the distribution of nanoparticles at the top of the fluid layer is less stable as compared to regular fluid and bottom heavy distribution of nanoparticles. It is figured out that the mode of stationary convection is independent of both; the Prandtl number and magnetic Prandtl number. It has been found that the critical values of wave number and Rayleigh number () exhibit a significant rise/fall with the rise in magnetic field parameter /porosity . Thus magnetic field is found to delay the onset of convection while porosity advances the same. With the increase in Darcy number, increases while decreases. It seems that the heat transfer characteristic of the nanofluid will get enhanced with the increase in Darcy number and magnetic field. Further, as one shifts from both-free boundaries to both-rigid boundaries, shows an appreciable increase along with moderate increase in . Thus, the system with both-rigid boundaries is found to have more stability as compared to rigid-free boundaries which in turn are more stable than free-free boundaries. Also, Cu-water nanofluid exhibits higher stability than Ag-water nanofluid in the present configuration of the system.

Competing Interests

The authors declare that they have no competing interests.

Acknowledgments

The financial assistance in the form of Research Project (Ref. no. 25(0247)/15/EMR-II) of Council of Scientific and Industrial Research, New Delhi, India, and Senior Research Fellowship (Serial no. 2061040991, Ref. no. 20-06-2010(i) EU-IV) of University Grants Commission, New Delhi, India, is gratefully acknowledged by the authors.