Table of Contents
International Journal of Manufacturing Engineering
Volume 2013 (2013), Article ID 386141, 9 pages
http://dx.doi.org/10.1155/2013/386141
Research Article

Uniform Dispersion of Multiwalled Carbon Nanotubes in Copper Matrix Nanocomposites Using Metal Injection Molding Technique

1Mechanical Engineering Department, Universiti Teknologi PETRONAS (UTP), Bandar Seri Iskandar, 31750 Tronoh, Perak Darul Ridzuan, Malaysia
2Centre of Innovative Nanostructures and Nanodevices (COINN), UTP, Bandar Seri Iskandar, 31750 Tronoh, Perak Darul Ridzuan, Malaysia
3Department of Mechanical & Materials Engineering, Universiti Kebangsaan, 43600 UKM Bangi, Selangor Darul Ehsan, Malaysia

Received 10 March 2013; Accepted 28 August 2013

Academic Editors: A. Lockamy and B.-K. Min

Copyright © 2013 Ali Samer Muhsan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ali Samer Muhsan, Faiz Ahmad, Norani M. Mohamed, Puteri Sri Melor Megat Yusoff, and Muhammad Rafi Raza, “Uniform Dispersion of Multiwalled Carbon Nanotubes in Copper Matrix Nanocomposites Using Metal Injection Molding Technique,” International Journal of Manufacturing Engineering, vol. 2013, Article ID 386141, 9 pages, 2013. doi:10.1155/2013/386141