Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 175743, 6 pages
http://dx.doi.org/10.1155/2014/175743
Research Article

Finite Element Analysis of PMMA Stretch Blow Molding

UGPMM, National Engineering School of Sfax, Route Soukra Km 2.5, BP 1173, Sfax, Tunisia

Received 30 May 2014; Revised 14 August 2014; Accepted 15 August 2014; Published 27 August 2014

Academic Editor: Hailiang Yu

Copyright © 2014 Afef Bougharriou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Afef Bougharriou, Mohieddine Jeridi, Mohamed Hdiji, Anoir Boughrira, and Kacem Saï, “Finite Element Analysis of PMMA Stretch Blow Molding,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 175743, 6 pages, 2014. https://doi.org/10.1155/2014/175743.