Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 261349, 13 pages
http://dx.doi.org/10.1155/2014/261349
Research Article

Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

1Department of Applied Engineering, Safety and Technology, Millersville University of Pennsylvania, Millersville, PA 17551, USA
2Department of Engineering Technology, University of North Texas, Denton, TX 76207, USA
3Department of Materials Science and Engineering, University of North Texas, Denton, TX 76207, USA

Received 8 November 2013; Revised 18 March 2014; Accepted 21 March 2014; Published 15 April 2014

Academic Editor: Gilles Dessein

Copyright © 2014 Vasim Shaikh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [1 citation]

The following is the list of published articles that have cited the current article.

  • K. C. Wickramasinghe, H. M. C. M. Herath, and G. I. P. Perera, “Empirical investigation of surface quality and temperature during turning AISI 304 steel with vegetable oil based metalworking fluids,” 2016 Manufacturing & Industrial Engineering Symposium (MIES), pp. 1–4, . View at Publisher · View at Google Scholar