Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 291564, 8 pages
http://dx.doi.org/10.1155/2014/291564
Research Article

Modeling of Tool Wear in Vibration Assisted Nano Impact-Machining by Loose Abrasives

Department of Mechanical and Materials Engineering, University of Cincinnati, Cincinnati, OH 45221, USA

Received 17 May 2014; Accepted 9 September 2014; Published 20 October 2014

Academic Editor: Tuğrul Özel

Copyright © 2014 Sagil James and Murali M. Sundaram. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. M. Sundaram and S. James, “Vibration assisted nano abrasive machining,” in Proceedings of the International Conference on Precision, Meso, Micro, and Nano Engineering, College of Engineering, Pune, India, 2011.
  2. S. James and M. M. Sundaram, “A feasibility study of vibration-assisted nano-impact machining by loose abrasives using atomic force microscope,” Journal of Manufacturing Science and Engineering, vol. 134, no. 6, Article ID 61014, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Agrawal, N. Moldovan, and H. D. Espinosa, “An energy-based model to predict wear in nanocrystalline diamond atomic force microscopy tips,” Journal of Applied Physics, vol. 106, no. 6, Article ID 064311, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. G. M. Robinson, M. J. Jackson, and M. D. Whitfield, “A review of machining theory and tool wear with a view to developing micro and nano machining processes,” Journal of Materials Science, vol. 42, no. 6, pp. 2002–2015, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Lu, Y. Gao, G. Michal, N. N. Huynh, H. T. Zhu, and A. K. Tieu, “Atomistic simulation of nanoindentation of iron with different indenter shapes,” Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, vol. 223, no. 7, pp. 977–984, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Komvopoulos and W. Yan, “Molecular dynamics simulation of single and repeated indentation,” Journal of Applied Physics, vol. 82, no. 10, pp. 4823–4830, 1997. View at Publisher · View at Google Scholar · View at Scopus
  7. P.-Z. Zhu, Y.-Z. Hu, H. Wang, and T.-B. Ma, “Study of effect of indenter shape in nanometric scratching process using molecular dynamics,” Materials Science and Engineering A, vol. 528, no. 13-14, pp. 4522–4527, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. H.-J. Kim, S.-S. Yoo, and D.-E. Kim, “Nano-scale wear: a review,” International Journal of Precision Engineering and Manufacturing, vol. 13, no. 9, pp. 1709–1718, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Liu, J. K. Notbohm, R. W. Carpick, and K. T. Turner, “Method for characterizing nanoscale wear of atomic force microscope tips,” ACS Nano, vol. 4, no. 7, pp. 3763–3772, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Khurshudov and K. Kato, “Wear of the atomic force microscope tip under light load, studied by atomic force microscopy,” Ultramicroscopy, vol. 60, no. 1, pp. 11–16, 1995. View at Publisher · View at Google Scholar · View at Scopus
  11. M. L. Bloo, H. Haitjema, and W. O. Pril, “Deformation and wear of pyramidal, silicon-nitride AFM tips scanning micrometre-size features in contact mode,” Measurement: Journal of the International Measurement Confederation, vol. 25, no. 3, pp. 203–211, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. K. Cheng, X. Luo, R. Ward, and R. Holt, “Modeling and simulation of the tool wear in nanometric cutting,” Wear, vol. 255, no. 7-12, pp. 1427–1432, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. M. D'Acunto, “Theoretical approach for the quantification of wear mechanisms on the nanoscale,” Nanotechnology, vol. 15, no. 7, pp. 795–801, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Gotsmann and M. A. Lantz, “Atomistic wear in a single asperity sliding contact,” Physical Review Letters, vol. 101, no. 12, Article ID 125501, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. S. James and M. M. Sundaram, “A molecular dynamics study of the effect of impact velocity, particle size and angle of impact of abrasive grain in the Vibration Assisted Nano Impact-machining by Loose Abrasives,” Wear, vol. 303, no. 1-2, pp. 510–518, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. O. Sahin, C. F. Quate, O. Solgaard, and A. Atalar, “Resonant harmonic response in tapping-mode atomic force microscopy,” Physical Review B: Condensed Matter and Materials Physics, vol. 69, no. 16, Article ID 165416, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. Q. Qi and G. J. Brereton, “Mechanisms of removal of micron-sized particles by high-frequency ultrasonic waves,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 42, no. 4, pp. 619–629, 1995. View at Publisher · View at Google Scholar · View at Scopus
  18. D. M. VandenBurg, The Sonochemical Remediation of Phthalate Esters: An Investigation into Products and Kinetics, University of Bath, Bath, UK, 2011.
  19. J. P. Cleveland, B. Anczykowski, A. E. Schmid, and V. B. Elings, “Energy dissipation in tapping-mode atomic force microscopy,” Applied Physics Letters, vol. 72, no. 20, pp. 2613–2615, 1998. View at Publisher · View at Google Scholar · View at Scopus
  20. S. M. Booij, Fluid Jet Polishing: Possibilities and Limitations of a New Fabrication Technique, 2003.
  21. D. Maugis, “Adhesion of spheres: the JKR-DMT transition using a Dugdale model,” Journal of Colloid And Interface Science, vol. 150, no. 1, pp. 243–269, 1992. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Bassani and M. D'Acunto, “Nanotribology: tip-sample wear under adhesive contact,” Tribology International, vol. 33, no. 7, pp. 443–452, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. T. D. B. Jacobs, B. Gotsmann, M. A. Lantz, and R. W. Carpick, “On the application of transition state theory to atomic-scale wear,” Tribology Letters, vol. 39, no. 3, pp. 257–271, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. K. J. Laidler, “The development of the arrhenius equation,” Journal of Chemical Education, vol. 61, no. 6, pp. 494–498, 1984. View at Publisher · View at Google Scholar · View at Scopus
  25. M. D'Acunto, “Controlling wear on nanoscale,” in Scanning Probe Microscopy in Nanoscience and Nanotechnology, pp. 647–686, Springer, 2010. View at Google Scholar
  26. C. M. Bertoni, V. Bortolani, C. Calandra, and E. Tosatti, “Dielectric matrix and phonon frequencies in silicon,” Physical Review Letters, vol. 28, no. 24, pp. 1578–1581, 1972. View at Publisher · View at Google Scholar · View at Scopus
  27. V. V. Tsukruk and V. N. Bliznyuk, “Adhesive and friction forces between chemically modified silicon and silicon nitride surfaces,” Langmuir, vol. 14, no. 2, pp. 446–455, 1998. View at Publisher · View at Google Scholar · View at Scopus
  28. S. James and M. Sundaram, “Modeling of material removal rate in vibration assisted nano impact-machining by loose abrasives,” Journal of Manufacturing Science and Engineering, 2014. View at Publisher · View at Google Scholar