International Journal of Manufacturing Engineering / 2014 / Article / Tab 8

Research Article

Enhancing Multistage Deep-Drawing and Ironing Manufacturing Processes of Axisymmetric Components: Analysis and Experimentation

Table 8

Case B: analysis of the results.

Comparative analysisProcess timeManufacturing cost per unit

Initial solution (IS)42.4 s0.398€
DDT algorithm solution38.93 s0.367€
Experimental solution (EXS)38.44 s0.352€
DDT versus IS improvement8.18%7.78%
EXS versus IS improvement9.34%11.55%
EXS versus DDT accuracy98.74%95.92%