Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process

Table 2

Input process parameters that affect output responses.

Run	layer thickness	part orientation	raster angle	raster width	air gap	Measured (MPa)
1	0.127	0	0	0.2032	−0.00254	32.56
2	0.127	0	0	0.2032	0.5588	6.52
3	0.127	0	0	0.5588	−0.00254	24.81
4	0.127	0	0	0.5588	0.5588	10.44
5	0.127	0	45	0.2032	−0.00254	34.61
6	0.127	0	45	0.2032	0.5588	4.78
7	0.127	0	45	0.5588	−0.00254	30.15
8	0.127	0	45	0.5588	0.5588	8.08
9	0.127	90	0	0.2032	−0.00254	12.86
10	0.127	90	0	0.2032	0.5588	4.39
11	0.127	90	0	0.5588	−0.00254	23.55
12	0.127	90	0	0.5588	0.5588	9.56
13	0.127	90	45	0.2032	−0.00254	15.1
14	0.127	90	45	0.2032	0.5588	4.01
15	0.127	90	45	0.5588	−0.00254	24.3
16	0.127	90	45	0.5588	0.5588	8.09
17	0.3302	0	0	0.4572	−0.00254	31.46
18	0.3302	0	0	0.4572	0.9652	8.43
19	0.3302	0	0	0.9652	−0.00254	24.99
20	0.3302	0	0	0.9652	0.9652	9.39
21	0.3302	0	45	0.4572	−0.00254	31.42
22	0.3302	0	45	0.4572	0.9652	7.12
23	0.3302	0	45	0.9652	−0.00254	28.94
24	0.3302	0	45	0.9652	0.9652	11.07
25	0.3302	90	0	0.4572	−0.00254	20.55
26	0.3302	90	0	0.4572	0.9652	8.89
27	0.3302	90	0	0.9652	−0.00254	24.72
28	0.3302	90	0	0.9652	0.9652	11.28
29	0.3302	90	45	0.4572	−0.00254	24.96
30	0.3302	90	45	0.4572	0.9652	8.82
31	0.3302	90	45	0.9652	−0.00254	27.35
32	0.3302	90	45	0.9652	0.9652	11.63