Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 769012, 6 pages
http://dx.doi.org/10.1155/2014/769012
Research Article

Flexural Strength Analysis of Starch Based Biodegradable Composite Using Areca Frond Fibre Reinforcement

1Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University, Manipal 576 104, India
2Department of Aeronautical and Automobile Engineering, Manipal Institute of Technology, Manipal University, Manipal 576 104, India

Received 18 June 2014; Accepted 28 October 2014; Published 13 November 2014

Academic Editor: Archie Lockamy

Copyright © 2014 Srinivas Shenoy Heckadka et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [1 citation]

The following is the list of published articles that have cited the current article.

  • Srinivas Shenoy Heckadka, Suhas Yeshwant Nayak, Manjeshwar Vijaya Kini, Revati Chowgule, and Pranay Jain, “Effect of Curing on the Tensile and Flexural Performance of Fully Biodegradable Corn Starch/Areca Frond Composites,” Journal of Composites, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar