Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 804705, 11 pages
Research Article

Studies on the Process Parameters of Rapid Prototyping Technique (Stereolithography) for the Betterment of Part Quality

1Department of Mechanical Engineering, REVA ITM, Bangalore, Karnataka 560037, India
2Institution of Engineers (India), Gachibowli, Hyderabad 500032, India
3Department of Mechanical Engineering, Sir MVIT, Bangalore, Karnataka 562157, India

Received 15 July 2014; Accepted 27 October 2014; Published 11 December 2014

Academic Editor: Konstantinos Salonitis

Copyright © 2014 Raju Bangalore Singe Gowda et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [2 citations]

The following is the list of published articles that have cited the current article.

  • Ravi Koirala, Sailesh Chitrakar, Amod Panthee, Hari Prasad Neopane, and Bhola Thapa, “Implementation of Computer Aided Engineering for Francis Turbine Development in Nepal,” International Journal of Manufacturing Engineering, vol. 2015, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • Zhicheng Huang, Jean-Yves Dantan, Alain Etienne, Mickaël Rivette, and Nicolas Bonnet, “Geometrical deviation identification and prediction method for additive manufacturing,” Rapid Prototyping Journal, 2018. View at Publisher · View at Google Scholar