Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 804705, 11 pages
http://dx.doi.org/10.1155/2014/804705
Research Article

Studies on the Process Parameters of Rapid Prototyping Technique (Stereolithography) for the Betterment of Part Quality

1Department of Mechanical Engineering, REVA ITM, Bangalore, Karnataka 560037, India
2Institution of Engineers (India), Gachibowli, Hyderabad 500032, India
3Department of Mechanical Engineering, Sir MVIT, Bangalore, Karnataka 562157, India

Received 15 July 2014; Accepted 27 October 2014; Published 11 December 2014

Academic Editor: Konstantinos Salonitis

Copyright © 2014 Raju Bangalore Singe Gowda et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Raju Bangalore Singe Gowda, Chandra Sekhar Udayagiri, and Drakshayani Doulat Narendra, “Studies on the Process Parameters of Rapid Prototyping Technique (Stereolithography) for the Betterment of Part Quality,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 804705, 11 pages, 2014. https://doi.org/10.1155/2014/804705.