Studies on the Process Parameters of Rapid Prototyping Technique (Stereolithography) for the Betterment of Part Quality

Table 8

The % of contribution of the parameters to the flexural strength along with the estimated ANOVA parameter.

Parameter “”	Sum of squares	Degree of freedom	Mean sum of squares	statistics	tabulated	% of contribution
							10.75	2	5.375	82.69		23.88
	20.3	2	10.15	156.15^*	99	45.09
	13.84	2	6.92	106.45^*		30.75
Error	0.13	2	0.065			0.28
Total	45.02	8	22.507

Significance at 99% confidence level ( statistics > tabulated).