Table of Contents
International Journal of Manufacturing Engineering
Volume 2015, Article ID 129428, 8 pages
http://dx.doi.org/10.1155/2015/129428
Research Article

3D Point Cloud Data Basis Shape Management for Assembly of Modularized Large and Complicated Marine Structures

1College of Civil Engineering, Nanjing Forestry University, Jiangsu, Nanjing 210037, China
2Samin Information Co., Ltd., Busan 612-020, Republic of Korea
3Advanced Ship Research Division, Korea Research Institute of Ships & Ocean Engineering, Daejeon 305-343, Republic of Korea

Received 6 November 2014; Revised 16 January 2015; Accepted 1 February 2015

Academic Editor: Konstantinos Salonitis

Copyright © 2015 Deok-Hyun Yoon et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. ITE, Design Tools to Support NAVSEA Ship Design & Program Management & NAVSEA-CNET HSI for Training Systems, 2007.
  2. J. H. Park, G. J. Jin, J. M. Kim, D. S. You, M. K. Oh, and D. S. Lim, “Ship building IT status and prospects,” Electronics and Telecommunications Trends, vol. 25, no. 4, pp. 19–54, 2010. View at Google Scholar
  3. M. l. Roh, W. Y. Choi, and K. Y. Lee, “Rapid pipe modeling method considering the relationship with a hull structure,” Journal of the Society of Naval Architects of Korea, vol. 43, no. 2, pp. 258–267, 2006. View at Google Scholar
  4. S.-C. Shin, J.-B. Cho, K.-Y. Shin, and S.-Y. Kim, “Process improvements for elevating pre-outfitting rate of FPSO,” Journal of the Society of Naval Architects of Korea, vol. 46, no. 3, pp. 325–334, 2009. View at Publisher · View at Google Scholar
  5. M. P. Tedesco, An approach to standardization of naval equipment and components [Master of Science Thesis], Massachusetts Institute of Technology, 1994.
  6. Y.-T. Choi, H.-W. Suh, and S.-S. Lee, “Establishment of information interface technology between hull and outfitting designs,” Journal of the Society of Naval Architects of Korea, vol. 50, no. 6, pp. 458–465, 2013. View at Publisher · View at Google Scholar
  7. The Waste Reduction Resource Center, Shipbuilding and Ship Repair Surface Coating NESHAP Compliance Inspection: How to Perform the Inspection, 2003.
  8. H. Y. Park, H. G. Kang, N. S. Park, and M. S. Lee, “Development of the E/R insulation modeling automation system using structural hull model information,” Special Issued of the Society of Naval Architects of Korea, pp. 112–117, 2008. View at Google Scholar
  9. Y. Watanabe and N. Yamaga, “Increasing speed of ship repair through three-dimensional laser measurement in compliance with environmental regulations,” Mitsubishi Heavy Industries Technical Review, vol. 50, no. 2, pp. 66–69, 2013. View at Google Scholar
  10. H. S. Kim, D. H. Lee, K. W. Bang, H. K. Cheon, and I. S. Kwak, “Establishing execution schedule system in ship building industry,” in Proceedings of the Korean Institute of Industrial Engineers, Seoul, Republic of Korea, 2010.
  11. F. Bernardini and H. Rushmeier, “The 3D model acquisition pipeline,” Computer Graphics Forum, vol. 21, no. 2, pp. 149–172, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. H. J. Kang, Y.-S. Yang, J. Choi, J.-K. Lee, and D. Lee, “Time basis ship safety assessment model for a novel ship design,” Ocean Engineering, vol. 59, pp. 179–189, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. H. J. Kang, J.-G. Shin, and J. K. Lee, “A business model-based design of a damage control support system for naval ships,” Systems Engineering, vol. 15, no. 1, pp. 14–27, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Z. A. Abdul-Rahman and V. Coors, “Improving the realism of existing 3d city models,” Sensors, vol. 8, no. 11, pp. 7323–7343, 2008. View at Google Scholar
  15. M. Y. Yang and W. Förstner, “Plane detection in point cloud data,” Tech. Rep. TR-IGG-P-2010-01, 2010, http://www.ipb.uni-bonn.de/technicalreports/. View at Google Scholar
  16. A. Adamson and M. Alexa, “Ray tracing point set surfaces,” in Proceedings of the Shape Modeling International (SMI '03), pp. 272–279, May 2003. View at Publisher · View at Google Scholar
  17. SAMIN, SAMIN Information System, 2014, http://www.saminis.com/.
  18. D. Lichti, M. P. Stewart, M. Tsakiri, and A. J. Snow, “Calibration and testing of a terrestrial laser scanner,” International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, vol. 33, no. B5/2, pp. 485–492, 2000. View at Google Scholar
  19. W. Boehler, M. Bordas, and A. Marbs, “Investigating laser scanner accuracy,” in Proceedings of the 19th CIPA International Symposium, Antalya, Turkey, 2003.
  20. The Mail on Sunday & Metro Media Group, Associated Newspapers Limited Part of the Daily Mail, 2014, http://www.dailymail.co.uk.