Table of Contents
International Journal of Manufacturing Engineering
Volume 2015 (2015), Article ID 287986, 10 pages
http://dx.doi.org/10.1155/2015/287986
Research Article

Development of HPDC Advanced Dies by Casting with Reinforced Tool Steels

1Tecnalia Research & Innovation, 20009 San Sebastián, Spain
2Industrias Lebario, 48213 Izurza, Spain
3Fundiciones Inyectadas Alavesas S.A., 01230 Nanclares de la Oca, Spain

Received 26 August 2014; Accepted 11 January 2015

Academic Editor: Jean-Yves Hascoet

Copyright © 2015 I. Vicario et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

I. Vicario, J. K. Idoiaga, E. Arratibel, et al., “Development of HPDC Advanced Dies by Casting with Reinforced Tool Steels,” International Journal of Manufacturing Engineering, vol. 2015, Article ID 287986, 10 pages, 2015. doi:10.1155/2015/287986