Research Article
Impacts of Wear and Geometry Response of the Cutting Tool on Machinability of Super Austenitic Stainless Steel
Table 2
Arrangement of the cutting trials.
| Trial | Cutting speed (m/min) | Feed/tooth (mm/tooth) | Cutting depth (mm) | Coolant |
| 1 | 100 | 0.1 | 2 | On | 2 | 100 | 0.1 | 3 | 3 | 100 | 0.15 | 2 | 4 | 100 | 0.15 | 3 | 5 | 150 | 0.1 | 2 | 6 | 150 | 0.1 | 3 | 7 | 150 | 0.15 | 2 | 8 | 150 | 0.15 | 3 |
|
|