Table of Contents
International Journal of Manufacturing Engineering
Volume 2016 (2016), Article ID 8609108, 12 pages
http://dx.doi.org/10.1155/2016/8609108
Research Article

An Architecture for Hybrid Manufacturing Combining 3D Printing and CNC Machining

Institut für Maschinen und Anlagenbau, Constantiaplatz 4, 26723 Emden, Germany

Received 5 July 2016; Accepted 30 August 2016

Academic Editor: Fu-Shiung Hsieh

Copyright © 2016 Marcel Müller and Elmar Wings. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Gebhardt, Generative Fertigungsverfahren: Additive Manufacturing und 3D-Drucken für Prototyping—Tooling—Produktion, 4. neu bearbeitete und erweiterte Auflage, München, Germany, 2013.
  2. H. B. Kief, H. A. Roschiwal, and K. Schwarz, CNC-Handbuch 2015/2016, Carl Hanser Verlag GmbH & Co. KG, München, Germany, 2015. View at Publisher · View at Google Scholar
  3. H.-S. Yoon, J.-Y. Lee, H.-S. Kim et al., “A comparison of energy consumption in bulk forming, subtractive, and additive processes: review and case study,” International Journal of Precision Engineering and Manufacturing-Green Technology, vol. 1, no. 3, pp. 261–279, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. E. Marquardt, M. Munsch, A.-K. Müller et al., Handlungsfelder, Additive Fertigungsverfahren, 2016, http://www.vdi.de/HandlungsfelderAM.
  5. D. Espalin, D. W. Muse, E. MacDonald, and R. B. Wicker, “3D printing multifunctionality: structures with electronics,” The International Journal of Advanced Manufacturing Technology, vol. 72, no. 5–8, pp. 963–978, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. V. Townsend and R. Urbanic, “A systems approach to hybrid design: fused deposition modeling and CNC machining,” in Global Product Development: Proceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th–21st April 2010, A. Bernard, Ed., pp. 711–720, Springer, Berlin, Germany, 2011. View at Publisher · View at Google Scholar
  7. I. Badr, Agent-based dynamic scheduling for flexible manufacturing systems [Ph.D. thesis], Universitätsbibliothek Stuttgart, Stuttgart, Germany, 2011, http://elib.uni-stuttgart.de/opus/volltexte/2011/5933.
  8. L. Nie, Y. Bai, X. Wang, K. Liu, and C. Cai, “An agent-based dynamic scheduling approach for flexible manufacturing systems,” in Proceedings of the IEEE 16th International Conference on Computer Supported Cooperative Work in Design (CSCWD '12), pp. 59–63, May 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. S. S. Crump, “Apparatus and method for creating three-dimensional objects,” US Patent 5,121,329, 1992.
  10. R. Jones, P. Haufe, E. Sells et al., “RepRap—the replicating rapid prototyper,” Robotica, vol. 29, no. 1, pp. 177–191, 2011. View at Publisher · View at Google Scholar
  11. S. Hong, C. Sanchez, H. Du, and N. Kim, “Fabrication of 3D printed metal structures by use of high-viscosity cu paste and a screw extruder,” Journal of Electronic Materials, vol. 44, no. 3, pp. 836–841, 2015. View at Publisher · View at Google Scholar
  12. S. Hwang, E. Reyes, K.-S. Moon, R. Rumpf, and N. Kim, “Thermo-mechanical characterization of metal/polymer composite filaments and printing parameter study for fused deposition modeling in the 3D printing process,” Journal of Electronic Materials, vol. 44, no. 3, pp. 771–777, 2014. View at Publisher · View at Google Scholar
  13. S. Masood and W. Song, “Development of new metal/polymer materials for rapid tooling using fused deposition modelling,” Materials & Design, vol. 25, no. 7, pp. 587–594, 2004. View at Publisher · View at Google Scholar
  14. P. M. Pandey, N. V. Reddy, and S. G. Dhande, “Improvement of surface finish by staircase machining in fused deposition modeling,” Journal of Materials Processing Technology, vol. 132, no. 1–3, pp. 323–331, 2003. View at Publisher · View at Google Scholar
  15. “Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines,” Electronic Industries Association, Standard EIA-274-D:1979, 1979.
  16. “RS-274X Gerber Format Specification,” Ucamco, Specification RS-274X, 2015.
  17. “Programmaufbau für numerisch gesteuerte Arbeitsmaschinen: Allgemeines,” Standard DIN 66025-1:1983-03, Deutsches Institut für Normung e.V., Berlin, Germany, 1983.
  18. “Programmaufbau für numerisch gesteuerte Arbeitsmaschinen: Wegbedingungen und Zusatzfunktionen,” Standard DIN 66025-2:1988-09, Deutsches Institut für Normung e.V., Berlin, Germany, 1988.
  19. “Automation systems and integration—Numerical control of machines—Program format and definitions of address words—Part 1: Data format for positioning, line motion and contouring control systems,” International Organization for Standardization, Standard ISO 6983-1:2009, 2009.
  20. S. Zacher and M. Reuter, Regelungstechnik für Ingenieure, Analyse, Simulation und Entwurf von Regelkreisen, 14. korrigierte Auflage, Springer, Wiesbaden, Germany, 2014.
  21. C. Bellehumeur, L. Li, Q. Sun, and P. Gu, “Modeling of bond formation between polymer filaments in the fused deposition modeling process,” Journal of Manufacturing Processes, vol. 6, no. 2, pp. 170–178, 2004. View at Publisher · View at Google Scholar
  22. W. Geller, Thermodynamik für Maschinenbauer: Grundlagen für die Praxis, Springer, Berlin, Germany, 2015.
  23. K. Wüst, Mikroprozessortechnik, Grundlagen, Architekturen, Schaltungstechnik und Betrieb von Mikroprozessoren und Mikrocontrollern, 4. verbesserte Auflage, Vieweg+Teubner Verlag, Springer Fachmedien Wiesbaden GmbH, Wiesbaden, Germany, 2011.
  24. J. S. Steinhart and S. R. Hart, “Calibration curves for thermistors,” Deep Sea Research and Oceanographic Abstracts, vol. 15, no. 4, pp. 497–503, 1968. View at Publisher · View at Google Scholar
  25. R. Parthier, Messtechnik, Grundlagen und Anwendungen der elektrischen Messtechnik für alle technischen Fachrichtungen und Wirtschaftsingenieure, 4. verbesserte Auflage, Friedr. Vieweg & Sohn/GWV Fachverlage GmbH, Wiesbaden, Germany, 2008.
  26. “DAkks-DKD-R-5-1: Kalibrierung von Widerstandsthermometern,” Deutsche Akkreditierungsstelle (DAkkS), Braunschweig, Standard DKD-R-5-1, 2010, http://www.dakks.de/content/kalibrierung-von-widerstandsthermometern.
  27. Y.-Z. Jin, J.-F. Zhang, Y. Wang, and Z.-C. Zhu, “Filament geometrical model and nozzle trajectory analysis in the fused deposition modeling process,” Journal of Zhejiang University-SCIENCE A, vol. 10, no. 3, pp. 370–376, 2009. View at Publisher · View at Google Scholar · View at Scopus