International Journal of Manufacturing Engineering

Table of Contents

Table of Contents

  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 8674187
  • - Research Article

Value Stream Mapping of Rope Manufacturing: A Case Study

Korakot Yuvamitra | Jim Lee | Kanjicai Dong
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 3848103
  • - Research Article

Designing a Test Fixture with DFSS Methodology

Charles G. Kibbe | Jim Lee | Kanjicai Dong
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 2021395
  • - Research Article

Supply Chain Inventories of Engineered Shipping Containers

David A. Field | Dennis E. Blumenfeld
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 7291898
  • - Research Article

Multiattribute Assessment of Consumables for TIG Welding of Aluminum Alloys

P. K. Baghel | D. S. Nagesh
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 7213148
  • - Research Article

Impacts of Wear and Geometry Response of the Cutting Tool on Machinability of Super Austenitic Stainless Steel

Mohanad Alabdullah | Ashwin Polishetty | Guy Littlefair
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 8609108
  • - Research Article

An Architecture for Hybrid Manufacturing Combining 3D Printing and CNC Machining

Marcel Müller | Elmar Wings
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 6198278
  • - Research Article

Pervasive Investigations of Critical Speed over Weight and Deflection Factors of Shaft Assembly in CNC Ball Screw System

Kuldeep Verma | R. M. Belokar
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 8697453
  • - Research Article

Dynamic Interaction between Machine, Tool, and Substrate in Bobbin Friction Stir Welding

Mohammad K. Sued | Dirk J. Pons
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 4680380
  • - Research Article

Analyzing the Effect of Machining Parameters Setting to the Surface Roughness during End Milling of CFRP-Aluminium Composite Laminates

M. Nurhaniza | M. K. A. M. Ariffin | ... | B. T. H. T. Baharudin
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 509808
  • - Research Article

Implementation of Computer Aided Engineering for Francis Turbine Development in Nepal

Ravi Koirala | Sailesh Chitrakar | ... | Bhola Thapa
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 592313
  • - Retraction

Retracted: Comparison of Microstructure and Mechanical Properties of A356/SiC Metal Matrix Composites Produced by Two Different Melting Routes

International Journal of Manufacturing Engineering
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 129428
  • - Research Article

3D Point Cloud Data Basis Shape Management for Assembly of Modularized Large and Complicated Marine Structures

Deok-Hyun Yoon | Hee Jin Kang | ... | Xin Huang
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 287986
  • - Research Article

Development of HPDC Advanced Dies by Casting with Reinforced Tool Steels

I. Vicario | J. K. Idoiaga | ... | P. Caballero
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 627218
  • - Research Article

An Investigation of Abrasive Water Jet Machining on Graphite/Glass/Epoxy Composite

Deepak Doreswamy | Basavanna Shivamurthy | ... | N. Yagnesh Sharma
  • International Journal of Manufacturing Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 786354
  • - Research Article

Finite Element Analysis of Residual Stress in Ti-6Al-4V Alloy Plate Induced by Deep Rolling Process under Complex Roller Path

J. J. Liou | T. I. El-Wardany

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.