Table of Contents
International Journal of Metals
Volume 2014, Article ID 628505, 11 pages
http://dx.doi.org/10.1155/2014/628505
Research Article

Corrosion Behavior of Carbon Steel in Synthetically Produced Oil Field Seawater

Department of Metallurgical and Material Engineering, Jadavpur University, Kolkata 700032, India

Received 16 September 2014; Accepted 14 November 2014; Published 17 December 2014

Academic Editor: Chi Tat Kwok

Copyright © 2014 Subir Paul et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Nešić, “Key issues related to modelling of internal corrosion of oil and gas pipelines—a review,” Corrosion Science, vol. 49, no. 12, pp. 4308–4338, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. L. T. Popoola, A. S. Grema, G. K. Latinwo, B. Gutti, and A. S. Balogun, “Corrosion problems during oil and gas production and its mitigation,” International Journal of Industrial Chemistry, vol. 4, aticle 35, 2013. View at Publisher · View at Google Scholar
  3. B. W. A. Sherar, P. G. Keech, and D. W. Shoesmith, “The effect of sulfide on the aerobic corrosion of carbon steel in near-neutral pH saline solutions,” Corrosion Science, vol. 66, pp. 256–262, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. B. W. A. Sherar, I. M. Power, P. G. Keech, S. Mitlin, G. Southam, and D. W. Shoesmith, “Characterizing the effect of carbon steel exposure in sulfide containing solutions to microbially induced corrosion,” Corrosion Science, vol. 53, no. 3, pp. 955–960, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. F. M. Song, “A comprehensive model for predicting CO2 corrosion rate in oil and gas production and transportation systems,” Electrochimica Acta, vol. 55, no. 3, pp. 689–700, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Hairil Mohd and J. K. Paik, “Investigation of the corrosion progress characteristics of offshore subsea oil well tubes,” Corrosion Science, vol. 67, pp. 130–141, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Tang, Y. Shao, T. Zhang, G. Meng, and F. Wang, “Corrosion behaviour of carbon steel in different concentrations of HCl solutions containing H2S at 90 °C,” Corrosion Science, vol. 53, no. 5, pp. 1715–1723, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. A. D. Foroulis, “Role of solution pH on wet H2S cracking in hydrocarbon production,” Corrosion Prevention and Control, vol. 40, no. 4, pp. 84–89, 1993. View at Google Scholar · View at Scopus
  9. M. A. Veloz and I. González, “Electrochemical study of carbon steel corrosion in buffered acetic acid solutions with chlorides and H2S,” Electrochimica Acta, vol. 48, no. 2, pp. 135–144, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Arzola and J. Genescá, “The effect of H2S concentration on the corrosion behavior of API 5L X-70 steel,” Journal of Solid State Electrochemistry, vol. 9, no. 4, pp. 197–200, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Y. Ma, X. L. Cheng, S. H. Chen et al., “Theoretical interpretation on impedance spectra for anodic iron dissolution in acidic solutions containing hydrogen sulfide,” Corrosion, vol. 54, no. 8, pp. 634–640, 1998. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Ma, X. Cheng, S. Chen, C. Wang, J. Zhang, and H. Yang, “An ac impedance study of the anodic dissolution of iron in sulfuric acid solutions containing hydrogen sulfide,” Journal of Electroanalytical Chemistry, vol. 451, no. 1-2, pp. 11–17, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Ma, X. Cheng, G. Li et al., “The influence of hydrogen sulfide on corrosion of iron under different conditions,” Corrosion Science, vol. 42, no. 10, pp. 1669–1683, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. H.-H. Huang, W.-T. Tsai, and J.-T. Lee, “Electrochemical behavior of the simulated heat-affected zone of A516 carbon steel in H2S solution,” Electrochimica Acta, vol. 41, no. 7-8, pp. 1191–1199, 1996. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Tang, Y. Shao, J. Guo, T. Zhang, G. Meng, and F. Wang, “The effect of H2S concentration on the corrosion behavior of carbon steel at 90 °C,” Corrosion Science, vol. 52, no. 6, pp. 2050–2058, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Smith, S. Roy, D. Swailes, S. Maxwell, D. Page, and J. Lawson, “A model for the corrosion of steel subjected to synthetic produced water containing sulfate, chloride and hydrogen sulfide,” Chemical Engineering Science, vol. 66, no. 23, pp. 5775–5790, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. R. E. Melchers, “Development of new applied models for steel corrosion in marine applications including shipping,” Ships and Offshore Structures, vol. 3, no. 2, pp. 135–144, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. M. H. Mohd, D. K. Kim, D. W. Kim, and J. K. Paik, “A time-variant corrosion wastage model for subsea gas pipelines,” Ships and Offshore Structures, vol. 9, no. 2, pp. 161–176, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. R. E. Melchers and J. K. Paik, “Effect of flexure on rusting of ship's steel plating,” Ships and Offshore Structures, vol. 5, no. 1, pp. 25–31, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Shehadeh and I. Hassan, “Study of sacrificial cathodic protection on marine structures in sea and fresh water in relation to flow conditions,” Ships and Offshore Structures, vol. 8, no. 1, pp. 102–110, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. R. A. Berner, “Thermodynamic stability of sedimentary iron sulfides,” The American Journal of Science, vol. 265, pp. 773–785, 1967. View at Google Scholar
  22. R. H. Hausler, L. A. Goeller, R. P. Zimmerman, and R. H. Rosenwald, “Contribution to the “filming amine” theory: an interpretation of experimental results,” Corrosion, vol. 28, no. 1, pp. 7–16, 1972. View at Publisher · View at Google Scholar · View at Scopus
  23. P. Taylor, “The stereochemistry of iron sulfides—a structural ration for the crysta llization of some metastable phases from aqueous solution,” American Mineralogist, vol. 65, pp. 1026–1030, 1980. View at Google Scholar
  24. R. A. Berner, “Iron sulfides formed from aqueous solution at low temperatures and atmospheric pressure,” The Journal of Geology, vol. 72, pp. 293–306, 1964. View at Google Scholar
  25. D. T. Rickard, “The chemistry of iron sulphide formation at low temperatures,” Stockholm Contributions in Geology, vol. 20, pp. 67–95, 1969. View at Google Scholar
  26. A. J. Bard, R. Parsons, and J. Jordan, Standard Potentials in Aqueous Solution, CRC Press, 1st edition, 1985.