Table of Contents
International Journal of Metals
Volume 2015, Article ID 624653, 10 pages
http://dx.doi.org/10.1155/2015/624653
Research Article

Microstructure, Strength, and Fracture Topography Relations in AISI 316L Stainless Steel, as Seen through a Fractal Approach and the Hall-Petch Law

1Department of Physical Metallurgy, School of Metallurgical Engineering and Materials Science, Central University of Venezuela, Apartado 47514, Los Chaguaramos, Caracas 1041-A, Distrito Capital, Venezuela
2Foundation for Professional Development, The Venezuelan College of Engineering, Caracas 1050, Venezuela
3Failure Analysis Laboratory, School of Metallurgical Engineering and Materials Science, Central University of Venezuela, Apartado 47514, Los Chaguaramos, Caracas 1041-A, Distrito Capital, Venezuela

Received 8 May 2015; Accepted 1 July 2015

Academic Editor: Carlos Garcia-Mateo

Copyright © 2015 Oswaldo Antonio Hilders et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Oswaldo Antonio Hilders, Naddord Zambrano, and Ramón Caballero, “Microstructure, Strength, and Fracture Topography Relations in AISI 316L Stainless Steel, as Seen through a Fractal Approach and the Hall-Petch Law,” International Journal of Metals, vol. 2015, Article ID 624653, 10 pages, 2015. https://doi.org/10.1155/2015/624653.