Table of Contents
International Journal of Metals
Volume 2016 (2016), Article ID 5021749, 8 pages
http://dx.doi.org/10.1155/2016/5021749
Research Article

Effect of the Strain Kind on the Texture and Microstructure of Low-Alloyed Steel

South Ukrainian National Pedagogical University Named after K.D. Ushinsky, 26 Staroportofrankovskaya Street, Odessa 65020, Ukraine

Received 11 April 2016; Revised 15 June 2016; Accepted 26 June 2016

Academic Editor: Hyoung Kim

Copyright © 2016 N. M. Shkatulyak et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. P. Zhilyaev and T. G. Langdon, Bulk Nanostructured Materials: Fundamentals and Applications, John Wiley & Sons, 2014.
  2. V. V. Stolyarov, Y. E. Beigel'zimer, D. V. Orlov, and R. Z. Valiev, “Refinement of microstructure and mechanical properties of titanium processed by twist extrusion and subsequent rolling,” The Physics of Metals and Metallography, vol. 99, no. 2, pp. 204–211, 2005. View at Google Scholar · View at Scopus
  3. I. V. Alexandrov, M. V. Zhilina, and J. T. Bonarski, “Formation of texture inhomogeneity in severely plastically deformed copper,” Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 54, no. 2, pp. 199–208, 2006. View at Google Scholar · View at Scopus
  4. I. Alexandrov, J. Bonarski, A. Korshunov, L. Tarkowski, and V. Sitdikov, “Homogeneity of the crystallographic texture and deformation behavior in Cu and Ti under severe plastic deformation,” Archives of Metallurgy and Materials, vol. 53, no. 1, pp. 237–241, 2008. View at Google Scholar · View at Scopus
  5. G. G. Yapici, Severe plastic deformation of difficult-to-work alloys [Master of Science], Texas A&M University, College Station, Tex, USA, 2004, http://oaktrust.library.tamu.edu/bitstream/handle/1969.1/531/etd-tamu-2004A-MEEN-Yapici-1.pdf?sequence=1.
  6. I. J. Beyerlein and L. S. Tóth, “Texture evolution in equal-channel angular extrusion,” Progress in Materials Science, vol. 54, no. 4, pp. 427–510, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Salari and J. Kazemi, “Formation of nano-sized grains and textural evolution during accumulative rollbonding (ARB) of Copper sheets,” http://www.nanocon.eu/files/proceedings/nanocon_10/lists/papers/412.pdf.
  8. E. Bonnot, A.-L. Helbert, F. Brisset, and T. Baudin, “Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB),” Materials Science and Engineering A, vol. 561, pp. 60–66, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. V.-D. Cojocaru, D. Raducanu, D. M. Gordin, and I. Cinca, “Texture evolution during ARB (Accumulative Roll Bonding) processing of Ti–10Zr–5Nb–5Ta alloy,” Journal of Alloys and Compounds, vol. 546, pp. 260–269, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. B. J. Bonarski, B. Mikułowski, E. Schafler, C. Holzleithner, and M. J. Zehetbauer, “Crystallographic textures of single and polycrystalline pure Mg and Cu subjected to HPT deformation,” Archives of Metallurgy and Materials, vol. 53, no. 1, pp. 117–123, 2008. View at Google Scholar · View at Scopus
  11. V. V. Usov, M. Salih, Z. Zhong, H.-G. Brokmeier, and N. Schell, “Texture gradient after twist extrusion,” in Proceedings of the European XFEL Users' Meeting and Satellite Meetings, DESY, Hamburg, Germany, January 2015, https://www.researchgate.net/publication/273631148_Texture_gradient_after_twist_extrusion.
  12. L.-Z. Wu, J. Chen, Z.-Z. Du, and J.-T. Wang, “Microstructures of ultra-fine grained FeCoV alloys processed by ECAP plus cold rolling and their evolutions during tempering,” Transactions of Nonferrous Metals Society of China, vol. 20, no. 4, pp. 602–606, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Ranjbar Bahadori, S. A. A. Akbari Mousavi, and A. R. Shahab, “Sequence effects of twist extrusion and rolling on microstructure and mechanical properties of aluminum alloy 8112,” Journal of Physics: Conference Series, vol. 240, no. 1, Article ID 012132, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. K.-T. Park, H.-J. Lee, C. S. Lee, and D. H. Shin, “Effect of post-rolling after ECAP on deformation behavior of ECAPed commercial Al-Mg alloy at 723 K,” Materials Science and Engineering A, vol. 393, no. 1-2, pp. 118–124, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. J. R. Gatti and P. P. Bhattacharjee, “Microstructure and texture of Al-2.5wt.%Mg processed by combining accumulative roll bonding and conventional rolling,” Journal of Materials Engineering and Performance, vol. 23, no. 12, pp. 4453–4462, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. D. V. Gunderov, A. V. Polyakov, I. P. Semenova et al., “Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing,” Materials Science and Engineering A, vol. 562, pp. 128–136, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Polyakov, D. Gunderov, V. Sitdikov, R. Valiev, I. Semenova, and I. Sabirov, “Physical simulation of hot rolling of ultra-fine grained pure titanium,” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 45, no. 6, pp. 2315–2326, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. W. K. Honeycombe, Plastic Deformation of Metals, Edward Arnold, London, UK, 2nd edition, 1984.
  19. N. Shkatulyak, “Effect of twist extrusion and subsequent rolling on the texture and microstructure of aluminium alloy,” International Journal of Advances in Materials Science and Engineering, vol. 3, no. 1, pp. 15–25, 2014. View at Google Scholar
  20. Y. Beygelzimer, D. Orlov, A. Korshunov et al., “Features of twist extrusion: method, structures & material properties,” Solid State Phenomena, vol. 114, pp. 69–78, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. V. Randle and O. Engler, Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, CRC Press, London, UK, 2000.
  22. P. R. Morris, “Reducing the effects of nonuniform pole distribution in inverse pole figure studies,” Journal of Applied Physics, vol. 30, no. 4, pp. 595–596, 1959. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Kaplow, J. F. Peck, F. T. J. Smith, and D. A. Thomas, “Substructure and mechanical properties of refractory metal wires,” Technical Documentary Report ML-TDR-64-56, 1964, http://www.dtic.mil/dtic/tr/fulltext/u2/602695.pdf. View at Google Scholar
  24. S. Leber, “Cylindrical textures in tungsten and other body centered cubic metals,” Transactions of the American Society for Metals, vol. 52, pp. 697–713, 1960. View at Google Scholar
  25. W. Skrotzki, R. Tamm, K. Kegler, and C. G. Oertel, “Deformation and recrystallization textures in iron aluminides,” in Proceedings of the International Conference on Microstructure and Texture in Steels and Other Material, pp. 379–390, Jamshedpur, India, February 2008.
  26. Y. Onuki, K. Okayasu, and H. Fukutomi, “Formation of 001 fiber texture in Fe-3mass%Si alloy during uniaxial compression deformation at elevated temperatures,” ISIJ International, vol. 51, no. 9, pp. 1564–1565, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Beygelzimer, “Vortices and mixing in metals during severe plastic deformation,” Materials Science Forum, vol. 683, pp. 213–224, 2011. View at Publisher · View at Google Scholar · View at Scopus